Here is my custom made MRC X Chassis.
Still very much a prototype I'd like to make it better any suggestions would help.

Currently it allows 3 postiions for mounting the shocks..
Not sure what the Benefits would be on the diffrent postiions it only raises it a little higher.
But I'm guessing the angle of the shock also makes a diffrences.
(Sorry I just started crawling dont know all the details of making a better crawler yet.. lol)

Ive also added a lower body mount option again it's not much lower...
but any lower and the body starts hitting the chassis.

Again this is very much a prototype.. Any suggestions to make it better
would be much appreciated..

Here are some pics below.

MRC X Chassis with Stock chassis in the middle
http://rccustomzone.com/rccz_pics/MRC/MRC_X-Chassis1.jpg

MRC X Chassis Shocks Mounted on Last Hole
http://rccustomzone.com/rccz_pics/MRC/MRC_X-Chassis2.jpg

MRC X Chassis Shocks Mounted on First Hole
http://rccustomzone.com/rccz_pics/MRC/MRC_X-Chassis3.jpg

MRC X Chassis Shocks Mounted on First Hole Angle View
http://rccustomzone.com/rccz_pics/MRC/MRC_X-Chassis4.jpg

MRC X Chassis With Body
http://rccustomzone.com/rccz_pics/MRC/MRC_X-Chassis5.jpg

Ok got my MRC X Chassis, here are some pics.. I got it at the most extreme setting.. The highest high and lowest low possible with this X chassis.

http://www.rccustomzone.com/rccz_pics/MRC/MRC-X3-1.JPG

http://www.rccustomzone.com/rccz_pics/MRC/MRC-X3-2.JPG

http://www.rccustomzone.com/rccz_pics/MRC/MRC-X3-3.JPG

http://www.rccustomzone.com/rccz_pics/MRC/MRC-X3-4.JPG

http://www.rccustomzone.com/rccz_pics/MRC/MRC-X3-5.JPG

http://www.rccustomzone.com/rccz_pics/MRC/MRC-X3-6.JPG

http://www.rccustomzone.com/rccz_pics/MRC/MRC-X3-7.JPG