I am starting to work on my setup on my 1/10th slider and am looking for any tips. It is stock with 13.5 and orion 2400 Lipo class. Track is very sticky large clay oval.

Thanks,

go fast...turn left!

go fast...turn left!

i was thinking about saying that ...lol:thumbsup:

go fast...turn left!

That must be what I was doing wrong:thumbsup:

Turn left is correct
but
if your really fast then you might have to turn alittle right also

My real problem is keepign the front wheels on the ground. Hit gas in corner and get a bad push, crank on the wheel and it will lide the back end around enough to lose momentum. Need to put some wheight up front and dial back the esc I guess.

Of course the biggest problem the last time I ran was on the last lap got turned and ran ito the off road track. Thoguht I could hit the jump and come out back on the track. Problem was it caused me miss the scoring loop and when it landed it stripped the tranny idler gear smooth. :cry: Live and learn

Bob

sprints are not for off road (LOL) they just don't like jumps.

I run a Losi green right front spring, orange right rear spring, and silver left rear and front. About two degrees of negative camber on right front and two degrees positive on left front. Three degrees negative on right rear and zero on left rear. Aluminum idler gear. I have 35 weight oil in all four shocks. May or may not work on your track.