I guess it's time for a new one.

1st Oval race of the season Oct. 3rd. Racing starts at 3:00PM

Hope to see you there!

You gonna have that red rocket ready dave?

I'm working on it now. I should have it ready to rock & roll!

I hope to be there. If they don't reschedule the rained out soccer game of my Grandson, I want to come up and start working on the setup for my
1/10th Slider.

I'm just getting my stuff ready. I hope to have my slider for Raber this weekend.:thumbsup:

Any 10.5 single-cell cars planning on making it out this weekend?

Here's the link to last years thread in case you need it.

http://www.hobbytalk.com/bbs1/showthread.php?t=228746

just drove my slider around the carpet track and it felt good!! need more speed though!! oh well going to have to wait a while for the brushless system..

How do you have it geared. I have been told that a 23 pinion with 86 spur works. But I haven't run mine yet to know.

Try a 23/90 if you are running stock electronics on carpet. I think I ran an 29/88 with the 13.5.

Sounds good to me. Thanks Brad.

thanks brad just threw in your suggested gearing and getting ready to go to the track..

should be up to c u guys next sat for the cot class, good luck to all of those hittn the rug today!

C3

good to hear from ya C3!! saw your Dad last weekend..

As always had a great time at the Fort.

Good to race with Shannon again; it has been a long time.

Great program, run on time, few glitches for the first week of a new indoor season.

Hope to see you all next Saturday, depending on what else is on my plate.

Awesome time as always Dale. Will try to be back as much as I can this season.

any results

Mudd, we had 9 start the cot main and there were 3 10.5 1s cars.

Cot Main
1. Anthony Searls
2. Travis Russel
3. David Raber
4 AJ Hoaglin
5 Dave Hoaglin
6 Cory Bedwell
7. Mike Dancy
8. Rod Hoaglin
9. Adam Hoaglin

I think thats how it went, too many damn hoaglins thats all I know. Now get your butt over here so we see how we stack up...lol

Good job Anthony ! C u guys soon as work permits .....

As always had a great time at the Fort.

Good to race with Shannon again; it has been a long time.

Great program, run on time, few glitches for the first week of a new indoor season.

Hope to see you all next Saturday, depending on what else is on my plate.



and it was great racing with you to Larry.. got schooled a little tonight between fixing my car all night and not being patient to pass people, oh well first time on a carpet oval in like 7 or 8 years, i will get the hang of it again.. but it was a great time with alot of great people!!!

Good time Sat. night!! Great racing with all of you. Enjoyed the close racing with Anthony all night. See you guys soon!

Shannon, is your son going to run this weekend? I plan on letting my daughter run my late model again, she is hooked. See you soon.

Mudd, we had 9 start the cot main and there were 3 10.5 1s cars.

Cot Main
1. Anthony Searls
2. Travis Russel
3. David Raber
4 AJ Hoaglin
5 Dave Hoaglin
6 Cory Bedwell
7. Mike Dancy
8. Rod Hoaglin
9. Adam Hoaglin

I think thats how it went, too many damn hoaglins thats all I know. Now get your butt over here so we see how we stack up...lol
THAT is why you are the internet sensation A.S.!!!!!
Look forward to racing with you goons soon.

dk

THAT is why you are the internet sensation A.S.!!!!!
Look forward to racing with you goons soon.

dk

Cmon Kemp, when the wins come far and few between and if someone asks, i gotta put it up there....lol. the sensation will see ya in cinci,

Shannon, is your son going to run this weekend? I plan on letting my daughter run my late model again, she is hooked. See you soon.

sorry not this weekend, but next weekend for sure!!! going to put a nicad in his to try and slow it down more. lol!!:wave:

Saturday night was another fun night. Some close racing especially in the USAC (Losi 1/10th) Sprint car races. There were four sprints all very close until near the end. I put min upside down and that hurt my chance of catching up. But that is part of it. Need to make a couple more changes to the car. The kit motor and ESC are working fine so far. Some brushless running but as we know oval racing is about getting through the corners not just staightaway speed. See you all next Saturday.

Well said Larry, had a great time last night. USAC sprint has to be one closest classes at summit. I will miss the next 4 weeks due to UNCLE SAM, but I will be back. Thanks Larry and Dave for bring your 1/8 LM, I will be working on mine.

Sorry about getting into you late in the race. Someone cut into me and I had to go to the ice to avoid the car. I hit the brakes but still slid across and hit you. I think you got away but I ended upside down and the turn marshall was working on someones car so he didn't see me.

But I got the car there so its all good.

See you again soon.

roll call for this Saturday!!!!!!!!!!! :thumbsup:

I've been pretty busy. I just got the USAC sprinter wrapped up for the most part last night. I still have plenty of work to do on my 13.5 COT rig. I guess thats what happens when you take a year off of pan car racing...

Congrats to Doug T. on the TQ & win in USAC sprint. :thumbsup:

Yes, you read it right :)

ouch....lol

Congrats to Doug T. on the TQ & win in USAC sprint. :thumbsup:

Yes, you read it right :)

It's going to be a longgg winter!
You been around Trackdog too much!

thanks daver had it worken on sat. hope it runs like that this week

It's going to be a longgg winter!
You been around Trackdog too much!


LOL :)

Seriously, Doug gets my vote for the most improved driver award.

Doug's car was working excellently. Congrats.

Congrats to Doug T. on the TQ & win in USAC sprint. :thumbsup:

Yes, you read it right :)
Dave R. Take a look at Boylan's post about 200 cars in stock at the Whip. Impressive. :)

dk

Just saw that myself...

http://www.hobbytalk.com/bbs1/showthread.php?t=268893

I should have my USAC Slider ready for competition this saturday. I agree with David that Doug drove great saturday but Kayla also was right behind him at the finish line to take second place. I hope she continues to race this class. :thumbsup:

I seen that too. I didn't know we were racing with R/C royalty. I want your autograph Raber!

So I was wondering what class I could possibly run at Summit.

I have a Leading Edge with a 13.5 novak and only have 4 or 6 cell nickel or 2s lipo packs. I do have a 10.5 I could thorw in but not really sure where I could fit in with either motor. I also have 27turn brushed stuff I could toss in if I had to go that route. Bodywise can I run a latemodel body or does it have to be a specific type of nascar body (COT?) as I have one but not sure what one it is.

Any help would be greatly appreciated. Also what about the Slash oval? Are enough showing up and what are the rules for that class? I have an 1/8th body I could mount up and think it would be fun to run some oval with it.

Trying to find somewhere I can run and not have to shell out a bunch of bucks to get into a class.:(

Thanks,
Randy

There are only a couple of us that have Slash Late Models but some others have talked about building. I don't know if the class will be run on carpet or not. Dale can explain that.

Go to the Summit website and look under rules. You will find what you need to determine the requirements for the classes.

Dave R. Take a look at Boylan's post about 200 cars in stock at the Whip. Impressive. :)

dk


Those were the days! I remember 600 cars at King, NC one year for the ROAR nationals.

There are only a couple of us that have Slash Late Models but some others have talked about building. I don't know if the class will be run on carpet or not. Dale can explain that.

Cool I think they would be cool to see running around the oval.

[/QUOTE]Go to the Summit website and look under rules. You will find what you need to determine the requirements for the classes.[/QUOTE]

Already tried that and that is why I asked here since there is nothing about rules on their site.:confused:

My apologizes, the rules tab is gone. I will let Scott the webmaster know. It normally is in the list in upper left hand corner.

Hey Scott or Dale did you know the rules tab has disappeared?

I will pm both of you as well as this post.

Hey guys, the link to the rules is missing from the Summit home page. Racers on the old oval thread asking about rules. I can't help them because I don't know the pan car rules.

I notified Dale and Scott about the issue.

If anyone of you can answer the question for the potential racer it would be helpful for him.

Summit Raceway 2009 / 2010 Oval Class Rules


13.5 Lipo Brushless Pancar
Class Rules: Cars must meet BRL regulations. See BRL Forum on HobbyTalk.

Vintage Oval
Chassis: 4WD Touring Car
Motor: ROAR Legal Brushless 21.5
Tires and Wheels: HPI tires part # 4793 front and 4797 rear. HPI wheels part # 3805 through 3814, 3815 through 3822, 3854 through 3860.
Weight: 1450g.
Ride Height: 3/16 minimum.
Batteries: 2 cell ROAR legal Lipos.
Bodies: Any vintage production car body pre 1980 model.
VTA rules will apply to this class other than bodies.
Outlaw and 13.5 Sprintcar
Chassis: Any 1/10th Sprintcar kit chassis.
Bodies: Body, wing and wing mounts must be used that comes with kit. Front wing may be used.
Motor: (Outlaw) open mod. (13.5) ROAR legal 13.5 brushless.
Batteries: ROAR legal 2 cell Lipos.
Wheels and Tires: Pancar foams.
Ride Height: 3/16 in. minimum.
Rules will follow dirtoval.com rules as close as possible. Any questions see Race Director.

USAC Sprintcar
This class will be a spec class for 1/10th Sliders without wings.
Batteries: 2400 Team Orion or Peak.
Ride Height: 1/2 in.
Modifications: springs, shock oil, pinion gear, 13.5 brushless system, approved parts for durability.
Mini LateModel
This class will be a spec class for 1/18th Losi LateModels.
Batteries: 1650 mah Lipo batteries or 6 cell mini batteries.
Modifications: springs, shocks, pinion & spur gear, 4200 Mamba brushless system, ball diff.
Race Directors will have ultimate authority over rules enforcement. The primary basis for any rules decision must be based on what will be best for the majority of racers. If an item is not addressed in the rules listed here then you should assume it is not legal.

Thanks, Dave.

This should help him get to the right location.

So I was wondering what class I could possibly run at Summit.

I have a Leading Edge with a 13.5 novak and only have 4 or 6 cell nickel or 2s lipo packs. I do have a 10.5 I could thorw in but not really sure where I could fit in with either motor. I also have 27turn brushed stuff I could toss in if I had to go that route. Bodywise can I run a latemodel body or does it have to be a specific type of nascar body (COT?) as I have one but not sure what one it is.

Any help would be greatly appreciated. Also what about the Slash oval? Are enough showing up and what are the rules for that class? I have an 1/8th body I could mount up and think it would be fun to run some oval with it.

Trying to find somewhere I can run and not have to shell out a bunch of bucks to get into a class.:(

Thanks,
Randy

Randy,

If you want to bring it with the 13.5, I have a single cell Lipo you can run. We run the COT body, but I'm sure Dale would let you run what you have for now. What kind of ESC are your using?

Randy,

If you want to bring it with the 13.5, I have a single cell Lipo you can run. We run the COT body, but I'm sure Dale would let you run what you have for now. What kind of ESC are your using?



Dave,

I am running one of the Novak Havoc (2s version) and have a Nascar body. I'm not sure what the difference is on the COT bodies. The one I have is pretty sleek looking and think it might be one.

I appreciate the offer on the pack use. Not sure how soon it will be when I can make it over to run but definately want to and just trying to make sure I have everything lined up beforehand.

One more thing can anyone please email me (jettvolks (at) yahoo.com) the BRL rules in something other than .doc format? I don't have microsoft word on my puter. Sorry I'm more of a surfer/poster/shopper type and don't do any real "work" on my puter. ;)

Randy