The wife got me this kit the other day at Hi-Blob lo-Blob
With a coupon or a sale this little kit is only about 7 bucks.
http://img.photobucket.com/albums/v351/stev123/DSCF1166.jpg
I built this when I was a kid, and slapped the two motor wired remote control from another tank into this one.

I've always loved the way this tank looks. I'm gonna do a weekend build, so I cut some sheet plastic to cover the bottom of the sponsons:
http://img.photobucket.com/albums/v351/stev123/DSCF1165.jpg
Slapped some tamiya O.D. on and filled in the open driver's vision blocks with some thick white glue:
http://img.photobucket.com/albums/v351/stev123/DSCF1164.jpg
This is a nice little kit. I covered the motorization holes with some sheet plastic. (Nothing fancy, nobody has any business picking up one of my models to look underneath anyway...lol)

The kit really isnt bad and not the dog it is made out to be. There should be some detail on the vertical sides of the tool lockers... you can make that with stretched sprue or Evergreen... The kit box art is good to work from.

One thing to do that makes a world of difference... buy the cheap AFV Club workable track links. The links are molded in steel plastic with seperate black plastic track pads. They are super simple to paint and snap together... they look wayyyyyy better than the worthless Tamiya ones. AFV also sells a wheel set, although the Tamiya ones are ok (the rubber hubs are annoying). If you have a better .50 cal machine gun, replace that too... otherwise the kit is really not so bad considering its nearly 40 years old now.

Pretty Good Kit! http://i235.photobucket.com/albums/ee54/philo426/2007_0830Spock0316.jpg

In Real life this was a good tank and Fast...I had the oportunity to drive one many many years ago at Ft.Knox.Nice acceleration

Too bad it was one of those between the Wars designs. Too late for combat in Korea and was out of US service by Vietnam. It did see some combat with the ARVN and in the Lebanese Civil Wars

I'm not gonna spend any dough on this one. I am going to spruce up the sides as Dave suggested. (my sprue stretching mojo is strong this morning...) Nice tank Philo!

I'm going to play around with the .50 cal a little bit..(try to drill out some details...etc.)
I just want a fun fast build,the fit is very good! I only used a trace of putty on the turret and the main gun barrel. And this kit has solid(non-vinyl) road wheel hubs, I think you were thinking about either the M-60 or the Leapord A-1 tank. I built both, and one or both of those has the vinyl wheel hubs...

Cool maybe they changed it? I was looking at my old issue and the wheel hubs (Part M11) are in OD vinyl and press on to the ends of the axles so the wheels turn (its motorized).

The kit wheels are not too bad... they are good to replace the horrid flat button wheels in the AFV Club M18 Hellcat tank destroyer (which oddly used the same wheel as the M41?!?)

Tamiya's Bulldog is a fun old kit. Most of the fixes it needs you can do yourself with sprue, a drill, some scrap plastic, etc.

I would spring for the tracks... they only run about $15. They have link or belt tracks. Both are vastly better than the crappy Tamiya ones which are totally smooth on the inside

http://www.missionmodels.com/files/t_17632.jpg

http://www.hobbycentre.com.au/AFV3552.jpg

AFV also sells a gluable vinyl mantlet with cover, tie down straps etc. Way cool and much better than Tamiya's notion of making the cover using a cellophane bag.

I did the cellophane thing when I was a kid, I don't remember much about hating the look or not. I was having too much fun running it around the house. I loved those two motor wired remote tanks! I had to write MRC after I broke all the suspension arms off my M-60 A-1...they sent me a new lower hull...I think they liked the fact that I drove my tank to death.
I'm unable to spend a dime on this little tank, But wait 'til you see the paint job on the tracks...

I used to love those old Tamiya kits - They were fun, and the fit was usually close to perfect. I look forward to seeing it done :cool:

btw, nice build, philo!

The seams are pretty easy to finesse away.
http://img.photobucket.com/albums/v351/stev123/DSCF1168.jpg
The vinly track don't look too bad with a little love.
http://img.photobucket.com/albums/v351/stev123/DSCF1172-1.jpg
http://img.photobucket.com/albums/v351/stev123/DSCF1173.jpg

Thats looking good. The old Tamiya kits still build up so easly they make good weekend projects. I find Tamiya's TS Series JGSDF Olive Drab spray paint to be a great match for the US Post War, darker OD shade.

The kit track outer face isnt bad... its the inside thats poor.

It's a really fun build. I used modelmaster leather (it's my favorite rust color)
and some black for the pads, and then a silver paint pen for the rub marks. The upper and lower hulls fit so well that I only needed a little white glue to fix the front and rear seams.
I half thought about painting her Panzer grey and doing Robert Shaw's "Tiger"

I'm really having fun building this little tank! Dave, I can see your point about the AFV club stuff, this little devil deserves some add-ons.
The fine detail on this kit is a hoot.
http://img.photobucket.com/albums/v351/stev123/DSCF1182.jpg
http://img.photobucket.com/albums/v351/stev123/DSCF1183.jpg
I'm sitting at the coffee table, watching Jessica Alba scuba diving, working on my tank, the laundry is in the dryer, and I made a huge batch of Chille Rellenos last night.
Yup, I'm in the zone...lol

Knock Knock...Who's there? Ma! ma who? Ma Deuce!
http://img.photobucket.com/albums/v351/stev123/DSCF1184.jpg
http://img.photobucket.com/albums/v351/stev123/DSCF1185.jpg
I should have taken a before pic. Some small drills,micro files..and look!
I also found my old Tamiya Modern US accessory set..really nice jerry cans and stencils for the ammo boxes....yup I'm having fun.

I'm getting carried away...I drilled out the headlights:
http://img.photobucket.com/albums/v351/stev123/2009_09220031.jpg
Thinned the exhaust pipes..the plastic tore a little giving it even more or a corroded look:
http://img.photobucket.com/albums/v351/stev123/2009_09220038.jpg
The pic above is funny, here I am spending ten minutes thinning the exhaust, and I miss the glaring mold seam on the main gun lock..(I fixed it)
Some fuel stains:
http://img.photobucket.com/albums/v351/stev123/2009_09220041.jpg
Here is a shot of the sides where I added stretched sprue..not my best work...
http://img.photobucket.com/albums/v351/stev123/2009_09220032.jpg

I must be driving you guys nuts..

A micro drill and too much time on my hands.
http://img.photobucket.com/albums/v351/stev123/2009_09220053.jpg
Putting on the initial weathering, a little coat of dust.
http://img.photobucket.com/albums/v351/stev123/2009_09220054.jpg
Can you tell I went to the Verlinden School of weathering?...lol
http://img.photobucket.com/albums/v351/stev123/2009_09220055.jpg

Lookin Great!

The Verlinden School of Weathering: that's another school I flunked!

I just could never achive his effects; but his work is amazing and is probably the most distictive and recognisable style of finish anywhere in the world.

The Verlinden School of Weathering: that's another school I flunked!

I just could never achive his effects; but his work is amazing and is probably the most distictive and recognisable style of finish anywhere in the world.

Thats a good thing to fail! There are much better and more realistic methods to use than the "drybrush it with white" method...

Pioneer at the time but kicked to the curb by newer, better modellers and techniques (like Mig).

Thanks guys!
I stil like looking at his work,even after all this time.
I over did the black panel emphasis, so I tried to lessen it with some flat grey spray paint(I misted it on as lightly as I could)..a hair over done..but it's easy to darken it a little.
I need to add the tools and paint the commander..I can't wait to see how the binoculars look when painted..I'm trying to decide how to color the lenses: dark blue or red?

I'm messing with the accesories now,I thinned the headlight guards..the one on the right is ready for paint.
http://img.photobucket.com/albums/v351/stev123/2009_09230042.jpg
Here is the weathering after I darkened it up a bit.
http://img.photobucket.com/albums/v351/stev123/2009_09230043.jpg

Looking good. You might want to repaint the tail lights to more closely match the real things.

US Lights are not identical left and right... the lower "light" on both fittings is a blacked out reflector lens. The top right "light" is a blacked out brake light. The top left light is the one that would look more red. But the upper left light does not have a silver reflector inside, just a clear red lens.

Modern museum restorations usually put two matching lights on both sides.

Thanks Dave! I never knew that I thought they were like backup lights or the notek light to keep sleepy drivers from running into the back of a vehicle...

Mutter, mutter...all that work,..mutter..tough graders...bet he was an english teacher,...mutter...lol!

nice job!

Thanks! Another project unfinished, I need to wrap the 'lil Seaview so I can get back to this kit...

I also built this kit many years ago but I can't remember if it had the vinyl wheel hub. It may have had them the German Tiger I had them. Both had electric motors and two speeds they could get real fast and climb steep grades. This company made good kits their fit and detail was very good. I built several tanks from this company. Including The german Tiger, M-60A1, and A2,german jadg panther, Panther and one half-track. Tanks have always been a favorite of mine. Great photos thanks for letting us see them.