Well fellow racers here are the race dates for the 2009 / 2010 Winter series !!!

All races will be at Freddies Hobbies on Saturdays with racing starting at 5:00
There is one race at the new Gate track Nov 7th which is located in Brunswick Oh That race is also a 5:00 start time.

Oct 10,24 Nov 7th is at the new Gate and will be on a large oval Nov 21 back to Freddies Dec 5,19 Jan 2010 2,16,30 Feb 13,27 Mar 13 last points race Mar 20 3rd annual Fig 8 roadoval race and awards.

The summer series as great and I hope the winter is even better :thumbsup:

Here are the racing rules

Stock class>> 1/18th BRP cars only SC18 / SC18 V2, SC18V2M 4 cell 2/3 A cells. We will be running stock car or truck bodies this season on the ovals. The rear must not be cut higher that the lower portion of rear bumper, NO holes or vents allowed in rear. Rear spoiler may be added max 1 1/4 " tall from rear trunk deck. COT stocker can run only COT wing that comes with body. Ball bearings in fronts only, BRP wheels only. Motors will be the Associated #21210 super 370. There will be a max pinion size of 10 tooth and a min spur size of 52 tooth in this class (only BRP gears allowed) Max rear tire diameter 1.400" We will also enforce a $15.00 claiming rule for this class on motors. After a run anyone in the stock class may claim a motor from the stock class(first come first served must go thru Bud) after paying $15.00 to the racer that is running the motor. It will be pulled at that time and given to the person claiming it. If someone shows up with a 16D powered 6 cell car they can run it in stock. As We have seen the 370 10/52 4 cell is faster than the 16D I don’t want to turn away anyone that has not run for some time.
Super stock> This class for the indoor season will be running COT bodies at all races oval cot wing only rear enclosed like in stock.. 4 Cell 2/3 A cells with ONLY the Associated #21210 super 370 motor allowed. This motor has a flat on the shaft so We will be able to tell!! Motor claim will be $15.00. Same rules as stock except for the body and gearing will be Max pinion 10 tooth Min spur 48 tooth Max rear tire diameter 1.400"
Brushless> 4200 castle motor only, gearing is Max pinion 14 Min spur 49 scalpel gears OK. Only speed controllers Tekin Mini Rage and castle creations (NO 1/12th speed controllers allowed)Body will be COT same a super stock class as far as wing and rear cut out.
Max rear tire diameter 1.400 "

All rules are same as We have been using with the addition of Super stock with a gearing of max pinion 10 and Min spur 48.

Brushless will allow the Chinese 4200 motor Micro found which testing this summer showed it is the same speed as the castle and will be around $20.00 instead of $60.00 which the castle now is :freak:

is there a link to that motor also to bad my mini tazer esc isnt legal and is the brushless class 4cell?

Yes all BRP racing is 4 cell. I don't have the link .

Micro >>> can You post it?

Does anyone need Niftec tire tractiion or motor drops? I will make a run before the next race. If you see a need let me know.

Does anyone need Niftec tire tractiion or motor drops? I will make a run before the next race. If you see a need let me know.

Don,
I could use a couple of bottles of tire compound!!!:thumbsup:
Thanks,
Brett

Don,
I could use a couple of bottles of tire compound!!!:thumbsup:
Thanks,
Brett


What are You going to use it on ?????

Just kidding 8>)

What are You going to use it on ?????

Just kidding 8>)

Winter's coming. It helps me get up the mountain to the ski resort!!!:p:thumbsup: We should be there next week as long as Logan doesn't have a baseball game!!!:thumbsup:

Don I could use a bottle of tire sauce and motor drops, Thank you!!

I will be makeing the trip to race with you guys one of these weekends. ;-)

I will be posting Pics of BRP cars racing HPI cars at Richmond International Raceway during the weekend of the Rock & Roll 400 races!!!

Sean

I will be makeing the trip to race with you guys one of these weekends. ;-)

I will be posting Pics of BRP cars racing HPI cars at Richmond International Raceway during the weekend of the Rock & Roll 400 races!!!

Sean

That will be fun to see :)

Winter's coming. It helps me get up the mountain to the ski resort!!!:p:thumbsup: We should be there next week as long as Logan doesn't have a baseball game!!!:thumbsup:

Hope so His Championship trophy is waiting.

Yes all BRP racing is 4 cell. I don't have the link .

Micro >>> can You post it?

It would be best to order from Bud directly as you will need a BRP motor plat to install this new brushless motor.. Bud should have them soon....:thumbsup:

It would be best to order from Bud directly as you will need a BRP motor plat to install this new brushless motor.. Bud should have them soon....:thumbsup:

I will :confused::drunk::p

YES - you will have some very soon....

Hi, I'm working on a SC18V2M with a custom chassis. Does BRP have the Chinese 4200 KV brushless $20 motor? I have modified the right side motor plate to take a 180 motor. Also what is "normal" ride highth? Don

I run My ride height about 3/16". That chassis looks pretty much like what We have now!!!

Hi Bud, the only thing I did different was the front end. I used As. servo saver mounting bolts for kingpins and just put "ears" on the chassis instead of a separate mounting plate. Don

DLS II - what servo are you using?

It's a Hitec HS-81MG. Here's a couple more pics. Don

The winter schedule has been added to the Micro_Racer web page.
http://sites.google.com/site/microracerbrpclub/Home

Enjoy!

Brushless 4200 motors are in and they are PRETTY !!! I will have them at the next race. I think they will be $25.00 since I have to make the spacer plate and get special screws. Only have 5 so get them fast :) there are 2 blue and 3 red cans.

hey bud any pics of them purty motors

One BLUE brushless BRP Motor :thumbsup:

Bud looks like 13 races, how many throw outs?

whats a good brand battery for 4cell

I use Team Scream cells
http://teamscreamracing.com/catagory.php?type=micro_cells

Bud looks like 13 races, how many throw outs?


K-5 >>it is 12 races and 4 throw outs :thumbsup:

Gate race is non points correct?

gate race is for points. The roadoval fig 8 is not points :)

So who is going to run brushless this winter series?

I know we have a few guys that have um...
OrangeRacer?
Slow and Fast Don?
Geoff?

I will be with My pretty new motor :thumbsup:

Don't forget the rebirth of super stock with 10/48 gearing I know there was talk for at least 5 racers. Some going up from stock and some from brushless.

Well the summer series is done and it was great !!

Now it's time for the winter series and it is only 2 weeks away :thumbsup:

Looks like ther will be a good chance there are enought to run the Super stock class I know Don S wants to do it :)

I'll run brushless again

I'll go super stock. 10/48 right?

Racers that are going to move to Super stock only difference from stock is 48 tooth spur instead of 52 That should make the cars just about the same speed as Brushless.

Don S
Ghoulardi
K-5 caper
Dave Morrow but may not be at all races before the champs at least
Who else ????
Need at least 5 regs to make it fun :)

Racers that are going to move to Super stock only difference from stock is 48 tooth spur instead of 52 That should make the cars just about the same speed as Brushless.

Don S
Ghoulardi
K-5 caper
Who else ????
Need at least 5 regs to make it fun :)

Dave Morrow, but I don't know how many races he will make.

Bud a package for YOU is going out today :)

Ok !!!!

I'll be there to run superstock on the 10th But getting the other eye done on the 29th so that one's iffy.

Question is, will there be enough for a super stock class?

Looks like 4 right now.

I'll be there to run superstock on the 10th But getting the other eye done on the 29th so that one's iffy.

Ross.......good luck with your surgery on the other eye. I'm sure you will be quite pleased with the results as I was this past June. :thumbsup:

Dave B.

I want to make sure I am clear on how the Bump-up will work. For this indoor series (now with 3 classes), I don't think we will have more than 10-11 racers in one class. What would be the cut-off (or number or racers) needed to have a B main? Does it make sense to have the top 7 locked in the A main and the other 2-4 people race in the B for the last spot in the A? OR should all 10 race in the A?

I want to make sure I am clear on how the Bump-up will work. For this indoor series (now with 3 classes), I don't think we will have more than 10-11 racers in one class. What would be the cut-off (or number or racers) needed to have a B main? Does it make sense to have the top 7 locked in the A main and the other 2-4 people race in the B for the last spot in the A? OR should all 10 race in the A?

We will do it like in the pasted based on # of entries. We forgot the bump up at the last points race :freak: Should only have to worry about stock since other classes will not be bigger that 8 I don't think

Mains will be 8 racers. If there are 9 We will probably run all together.

We need more new racers or old one that have everything to come back out and play. I know We have 3 new with 2 other new maybe coming.

I think the way we have been working it was, more then 10 there is a B main....top 7 locked into the A and the rest battle for the 8th spot.....10 or less....all in the A main.

As long as we have a consistent rule, it's all good. So 10 racers seems to be the sweet spot...

I hate to sound pushy, but when are the final series points going to be posted?

google is having some issues so below are the points

Stock
1 Dave Morrow 478
2 Dan Korff 478
3 Ross Jaenke 463
4 BRP Rental Truck 461
5 Bob Sauer 450
6 Don Deutsch 426
7 Ryan Sauer 423
8 Jeremy Elwood 406
9 Brankica 406
10 Mark Heitger 365
11 George 313
12 Brett Watson 272
13 Tony 235
14 Wayne Gerber 190
15 Mike Long 187
16 Rick Dyke 163
17 Bud Bartos 99
18 Tim Waaso 89
19 Rich Mickle 86
20 Dennis Miller 75
21 Dave Lazor 23

Ross.......good luck with your surgery on the other eye. I'm sure you will be quite pleased with the results as I was this past June. :thumbsup:

Dave B.
Thanks Dave. 1st one is doing well so I suspect the second one will too. Probably gonna have to pop the lens out of the 1st one so I can see. :freak: