View Full Version : 2009-10 Mt. Pleasant Carpet Oval!!


Pages : 1 2 3 4 5 6 7 [8] 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

WIGMAN
11-17-2009, 02:56 PM
hey Keith hook me up with a truck and I will win it in your honor, I will be down with casey at some point Saturday morning.
Joel
Six days away from the next race. Who will win the truck race this week? Will Duke show up? What about that guy that had so many wins and now? What was his name? Will any of those from the west side have the courage to show?

harmocy
11-17-2009, 03:58 PM
hey Keith hook me up with a truck and I will win it in your honor, I will be down with casey at some point Saturday morning.
Joel

Hey Joel did you guys get a truck half put together that maybe I could run if I go along??? I will drive my van the rest of the way from Gaylord if you uys want me too!!! I am sure that Casey is reading this as well so he can answer too!!!
:thumbsup:

toytech
11-17-2009, 09:22 PM
Where's Al? I haven't seen him on here in quite awhile!

likin his wounds also:(

Racknor
11-18-2009, 05:11 AM
hey Keith hook me up with a truck and I will win it in your honor, I will be down with casey at some point Saturday morning.
Joel

If you are coming with Casey will you be here for the mains?

WIGMAN
11-18-2009, 06:58 AM
Yeah, we should be there between 9 and 9:30.
Thats a good one Keith.

OvalTrucker
11-18-2009, 08:13 AM
9 or 9:30!!? That would mean Casey's already got his stuff packed up and he's in the car right now! :)

Racknor
11-18-2009, 09:33 AM
There is no way he can pack that much stuff already!

Scott the ride height box is ready. It even has a test block hooked to it so when Deano says it is .0000021 to high we can prove it to him.

toytech
11-18-2009, 11:43 AM
There is no way he can pack that much stuff already!

Scott the ride height box is ready. It even has a test block hooked to it so when Deano says it is .0000021 to high we can prove it to him.

did Deano make the block? if not he can still protest it!!:tongue:

jrsheets
11-18-2009, 02:18 PM
So what motors are we strapping in for the weekend?

10.5?

7.5?

3.5?

You know, we could just make it a MOD class... run what ya brung and hope you brung enough! ;)

Promatchracer
11-18-2009, 02:48 PM
Hey Joel did you guys get a truck half put together that maybe I could run if I go along??? I will drive my van the rest of the way from Gaylord if you uys want me too!!! I am sure that Casey is reading this as well so he can answer too!!!
:thumbsup:
I have 3 fully running trucks and a the 4th just needs the receiver
So LMK if you want to head out with us
I also have the transponders If you need them before Sat LMK and I will ship them down to you

harmocy
11-18-2009, 03:37 PM
I have 3 fully running trucks and a the 4th just needs the receiver
So LMK if you want to head out with us
I also have the transponders If you need them before Sat LMK and I will ship them down to you

I will not need them before Saturday but there is a good chance that I would go with you guys on Saturday I could help you out with your stuff as well
Give me a call when you get some time!!!

Promatchracer
11-18-2009, 05:11 PM
Hey folks right now it looks like there is 4 of us coming down from the northern contention
Team KC Hobbies will be in effect

Hey Zippy we are still on

I need a Mini servo is someone has one to sell LMK what you got I need it for the McPappy I have
Thanks and see you guys about 9 am

Racknor
11-19-2009, 05:54 AM
It sounds to me the world is getting more trucks and not enough drivers. I wonder if we could get some of those small guys to stand on the stage and look like they are driving so a few of us outcast drivers could stand behind the pop machine and drive one of these trucks?

Racknor
11-19-2009, 05:57 AM
Duke it sounds like you are going to miss the biggest race of the year. 8 heats of trucks! But I guess that kind of pressure some cannot take. To ALLLLLLL the big guys that are showing up this Saturday good luck!

OvalTrucker
11-19-2009, 08:15 AM
Well, it's raining here in MP. That's bad. A rain day during the week may turn Saturday into a work day instead of a race day for me. I'm beginning to wonder if I'll ever get to go racing again!

In the event I can't make it Saturday, I'll need someone to bring a laptop for the scoring program. Other than my award winning drivers meetings, a laptop is the one thing lacking to keep the program on track.:)

Kevin, Did you take the scoring loop with you last month? I had Jon's spare one and now I don't. I think it may have been packed up with the rest of your scoring hardware.

I've got my fingers crossed. I really don't want to miss out on yet another race but, we all know how hard it is to give up work these days.

toytech
11-19-2009, 08:25 AM
Well, it's raining here in MP. That's bad. A rain day during the week may turn Saturday into a work day instead of a race day for me. I'm beginning to wonder if I'll ever get to go racing again!

In the event I can't make it Saturday, I'll need someone to bring a laptop for the scoring program. Other than my award winning drivers meetings, a laptop is the one thing lacking to keep the program on track.:)

Kevin, Did you take the scoring loop with you last month? I had Jon's spare one and now I don't. I think it may have been packed up with the rest of your scoring hardware.

I've got my fingers crossed. I really don't want to miss out on yet another race but, we all know how hard it is to give up work these days.


no excuses you will be there:wave:

Promatchracer
11-19-2009, 08:29 AM
I will bring my laptop and the scoring loop if I can find it
I will need you to export the drivers info and send it to me so I can put it in the laptop
That way I wont have to enter everybody manually
Call me after 4 pm at the shop 906 643 WERC (9372)

OvalTrucker
11-19-2009, 08:46 AM
I will bring my laptop and the scoring loop if I can find it
I will need you to export the drivers info and send it to me so I can put it in the laptop
That way I wont have to enter everybody manually
Call me after 4 pm at the shop 906 643 WERC (9372)

Thanks Casey but Mr. Dialed has offered up a laptop already. We are all set!

Promatchracer
11-19-2009, 09:54 AM
Scott if you can't make it can you get the trued tires there for me
Also LMK if they are blue fronts or silvers that way I can have the right ones set aside for you to replace them

Thanks

OvalTrucker
11-19-2009, 10:03 AM
Scott if you can't make it can you get the trued tires there for me
Also LMK if they are blue fronts or silvers that way I can have the right ones set aside for you to replace them

Thanks

I spoke too soon on the trued tires. I thought I had a spare full set. I don't. I must have given them to someone because they are gone from my tire box.

Sorry. I'll have my truer at the track if I'm not working.

harmocy
11-19-2009, 12:52 PM
I spoke too soon on the trued tires. I thought I had a spare full set. I don't. I must have given them to someone because they are gone from my tire box.

Sorry. I'll have my truer at the track if I'm not working.

Casey if you want I have a truer as well that I will bring just in case!!! I did Mikes and they came out sweet!!! I will have calipers and truer ready to go when you get here Saturday!!!

kevinm
11-19-2009, 12:59 PM
Scott - I've probably got the loop wire, but I think it became a 2-piece loop when we were pulling up the duct tape, so it needs to be fixed and/or replaced anyway. I've also got a laptop now, but haven't tried it with tthe AMB system yet. I'll let you know if it works. Is your printer available?

Racknor
11-19-2009, 01:50 PM
Deano can I get a copy of the setup sheet you got from Mark C?

toytech
11-19-2009, 02:06 PM
Deano can I get a copy of the setup sheet you got from Mark C?

I've got an awsome setup for ya Keith!!:tongue:

mc43
11-19-2009, 02:43 PM
racknor put your spoon away

gjdean
11-19-2009, 02:46 PM
Deano can I get a copy of the setup sheet you got from Mark C?

Ok here it is.
RIDE HEIGHT: Lay down
RAKE: Lift leg
Toe: Bend forward
KING PIN LUBE: :p:p:p:p:p:p

bustedpiecesrc
11-19-2009, 02:51 PM
you cant get much better than that.. LOL

mel
11-19-2009, 02:58 PM
Deano can I get a copy of the setup sheet you got from Mark C?


Now I have seen everything. Maybe the world is ending in 2012.

boooostedz
11-19-2009, 04:01 PM
well hopefully i wil be making my first attempt at racing the truck this weekend! should definatly be interesting!

also i will be bringing some stuff to sell. l4 roller w/servo $85, irs extended pod plates $15, novak gtx $35, nip bsr front and rear pinks $20 for both pairs, nip monte carlo body $15, t3 roller with spares $75, if anyone is interested in anything let me know!

kevinm
11-19-2009, 05:02 PM
In the event I can't make it Saturday, I'll need someone to bring a laptop for the scoring program. Other than my award winning drivers meetings, a laptop is the one thing lacking to keep the program on track.:)

Kevin, Did you take the scoring loop with you last month? I had Jon's spare one and now I don't. I think it may have been packed up with the rest of your scoring hardware.
I've got lotsa loops in the box, and it looks like the software works fine on my laptop.

Promatchracer
11-19-2009, 05:16 PM
If you guys need anything to run it LMK and I can bring it down
I will also have 2 MRT transponders for sale They are brand new and are the Custom 20# ones The cost is $85 for them each firm

Later

OvalTrucker
11-19-2009, 06:16 PM
20 pounds! Holy Crap!

Roadsplat
11-19-2009, 07:42 PM
Ok here it is.
RIDE HEIGHT: Lay down
RAKE: Lift leg
Toe: Bend forward
KING PIN LUBE: :p:p:p:p:p:p

LOL:thumbsup:

millerman
11-20-2009, 12:17 PM
hi guys it bob hendry i'm looking for an LE pan car ( roller ) if anyone has one let me know thanks bob

OvalTrucker
11-20-2009, 12:26 PM
Hi Bob! Jim Hanson might be the guy to check with. He always seems to have a couple for sale at the track.

Roadsplat
11-20-2009, 01:55 PM
Scott..You gonna make it tomorrow?

OvalTrucker
11-20-2009, 01:58 PM
Too early to say for sure. I hope to know by 6pm.

kevinm
11-20-2009, 02:00 PM
Scott - Is your printer available to use? If yes, what kind is it?

OvalTrucker
11-20-2009, 02:14 PM
Kevin- Maybe(it's my wifes) and HP.

WIGMAN
11-20-2009, 02:21 PM
Well guys it is not looking good for me to be able to come down tomorrow.
The wifes dad is in the hospital and not doin too well. Breating problems, heart problems, and some of the meds they are giving him are making him halucinate. He is better today than he was yesterday. They are doing an ultra sound on his heart right now so hopefuly things will get better and I can join ya, but it isn't lookin good.

kevinm
11-20-2009, 02:28 PM
Kevin- Maybe(it's my wifes) and HP.
Model number??

OvalTrucker
11-20-2009, 02:30 PM
Deskjet 940c

Promatchracer
11-20-2009, 02:55 PM
Yea you know what I Meant 20 Number
20 pounds! Holy Crap!

RobD
11-20-2009, 06:14 PM
I will also have 2 MRT transponders for sale They are brand new and are the Custom 20# ones The cost is $85 for them each firm

Later

I have two of these in the two pancars, and they work great. A good alternative to the "brand name" transponders. If anybody wants to see one before Casey arrives for the mains, stop by my table. I'm usually somewhere between Mr. Dialed and that Racknor dude.

RayMusser
11-20-2009, 06:58 PM
breakfast tommorow?

RobD
11-20-2009, 07:10 PM
BW3 for some breakfast wings? ;)

Promatchracer
11-20-2009, 07:47 PM
Wheres that at
Also Joel is a no go But will try and make it for the 12th
Big Rob Adam from Gaylord and Myself will be there
I might make Breakfast if anybody will ever say where it is

RayMusser
11-20-2009, 09:46 PM
ponderosa 8:00????

OvalTrucker
11-20-2009, 10:27 PM
Yes Ray! Pondo at 8! See ya there!

RobD
11-21-2009, 12:40 AM
Does that mean you'll be racing with us Scott? You can't eat breakfast and skip racing.

I'm giving up for the night and will see you guys in the morning. I'm going to be busy putting the finishing touches on the cars between 9am and noon. I didn't save everything for the day before racing, but apparently saved too much.