I bought a used charger has the lipo upgrade down to it
I have a problem with it that it is not charging packs you hook it up and go throught the steps but it doesn't show any amps being put in it
Shows the time but no mil and no amps going into pack
Shows what the pack has for volts too
LMK if you folks can help

anybody help ?????

KC

Take a pic of the screen and I'll have my kid look at what it says.

We use 3 of those chargers, and I know once I had something set wrong and it wouldn't charge - and he found and fixed it.

will try tomorrow
It shows the volts in the pack and the time that it is charging but doesn't have any mah going into it and doesn't show

this is what it looks
chg 0.0A 000:00(time)
7.70v 0000mah

KC - if possible, get me your settings too

(Battery Type = LIPO)
mAh = 3200 (or what ever)
Amp Charge Rate setting.

....I forgot to ask - WHICH "Orion" Charger is this (I just assumed it is the Advantage Carbon Edition)

you can cal me at teh shop I don't have long distance on the phone and I don't have your # here yet
906 643 9372
(Battery Type = LIPO) YES
mAh = 3200 (or what ever) 5000
Amp Charge Rate setting. 6 amp
and it is the advantage

I had this happen with my Orion a couple years ago. Emailed customer support and they asked me to try a few things, in the end they said to ship it in to them. A NIP one was back in my hands a couple weeks later and has never had a problem again.

Short answer - its hooped - send it in to get looked after.