What are you guys using for an "On/Off" switch on your radio boxes?

JB
:thumbsup:

micro toggle from radio shack and there small project boxes work great for electronics

I use a small two pole switch from Radio Shack.

Mine's a Mini slide just like Futaba's switch harness. 12VDC@10 amps.

I personally use a switch from Futaba also, the one with the charging lead with it,then I boot the switch with a rubber boot from the offroad cars.
I use the radio box from a Kyosho 777sp2. Smaller and weather tight. Receiver and Lipo battery w/regulator fits real good.

This is what I was thinking of using:

http://www.radioshack.com/product/index.jsp?productId=2062524

JB
:thumbsup:

I personally use a switch from Futaba also, the one with the charging lead with it,then I boot the switch with a rubber boot from the offroad cars.
I use the radio box from a Kyosho 777sp2. Smaller and weather tight. Receiver and Lipo battery w/regulator fits real good.

LOL my super sceret receiver box is a Wall Mart travel soap keeper.
.50 cents @ Walley World.

I use heavy duty DPDT LED switch. And makes it easy for anyone to see it to shut it off or turn on.

Also, Bob Knox sells a nice one ready to mount / clamp on and go.

http://www.maxxprod.com/mpi/mpi-4_files/5170_t.jpg

This is what I use. I like the built in battery monitor. They are a bit pricy at $25.

http://www.maxxprod.com/mpi/mpi-4_files/5170_t.jpg

This is what I use. I like the built in battery monitor. They are a bit pricy at $25.
Me too Tanner, i use those on all of my cars!!

http://www.maxxprod.com/mpi/mpi-4_files/5170_t.jpg

This is what I use. I like the built in battery monitor. They are a bit pricy at $25.

Who makes these?

Me too Tanner, i use those on all of my cars!!



ME 3!

I put a deans plug (female) in line on the negative wire of the reciever pak.Then I the took the male end of the deans plug and soldered a 3 inch wire from the negative to the positive. then just wire tie it where you want, then plug and play.

http://www.maxxprod.com/mpi/mpi-4_files/5170_t.jpg

This is what I use. I like the built in battery monitor. They are a bit pricy at $25.

I would like to know Who makes these and where can I buy one?

Chuck #3

I would like to know Who makes these and where can I buy one?

Chuck #3

can't tell you , its a speed secret.

I would like to know Who makes these and where can I buy one?

Chuck #3

It looks like MPI is stamped on them . Freddie might be able to check them out .

Aerotech in N. Canton has them. That's where I got mine.
Yes, they are MPI.

Doorman:cool:

Sorry guys they are MPI, got them at my local hobby store for myself and the guys here...very reliable, a bit pricey but worth it to me!!! the guys here said it made thier cars two tenths quicker..LOL

Sorry guys they are MPI, got them at my local hobby store for myself and the guys here...very reliable, a bit pricey but worth it to me!!! the guys here said it made thier cars two tenths quicker..LOL

Only 2 tenths, they look much faster than that from the pictures!!!...
I would have guessed maybe close to a lap!!!...:wave::wave::wave:

DD

Only 2 tenths, they look much faster than that from the pictures!!!...
I would have guessed maybe close to a lap!!!...:wave::wave::wave:

DD
your right Dave but only against Willy and his yellow dress!!

If that's all yall can get out of that switch your about to go laps down

If that's all yall can get out of that switch your about to go laps down
not to you and thats a proven fact by the dress you wear....ROTFLMAO

Don't get it twisted it was your dress and I hope to see how well I know it will fit you at the next ncs

Hey Will,
Mikey needs to swap the thing he races without fenders for a good sportsman car and come swap paint.