PDA

View Full Version : 26hp briggs Ign. gap?

wiretwister
05-14-2009, 12:49 PM
What is the proper gap between ign. coil and flywheel mag. 26hp briggs 44p777-0111 THANKS!
scrench
05-14-2009, 08:41 PM
business card
phillipmc
05-15-2009, 02:35 AM
as scrench said a buisness card works great.

Adjust the coil all the way out to biggest gap and snug it down then turn flywheel so the magnent is directly under the coil and put the busisness card between them losen the coil and let the magnet pull it to the flywheel tighten down and gently spin the flywheel pull the buisness card with it to remove it.
30yearTech
05-15-2009, 06:08 PM
as scrench said a buisness card works great.

Adjust the coil all the way out to biggest gap and snug it down then turn flywheel so the magnent is directly under the coil and put the busisness card between them losen the coil and let the magnet pull it to the flywheel tighten down and gently spin the flywheel pull the buisness card with it to remove it.

That will work, and that's how I do it as well. If you want the recommended gap, you can find it here (http://www4.briggsandstratton.com/miscpdfs/RNT/Engine%20Specifications%20Chart_ms3992.pdf) with your model number