TJet Factory List - 139 To Go!!! [Archive]

partspig

05-02-2009, 09:05 PM

This is Revision "N"

We have 90 Shareholders. We are 115 shares short of the goal of 1000 shares!

Here is the updated list as of 9PM, May 2nd, 2009

From April 30th on the HOWL List---

Chassifilanthropists,

The new chassis from the tjet factory will be:

1) Made in America
2) Made to the closest original tjet blueprint tolerances possible
3) Made of the original material where possible
4) Made with solid rivet chassis
5) A clone of the original 1963 chassis
6) Complete armature consistency to the current RACING community standards
7) Magnets blueprinted to the armatures with consistency (standard strength and maximum strength will be offered)
8) Complete interchangeability with an original tjet chassis
9) Consistent care and attention to the quality of the drive train components
10) Available in kit form or assembled
11) Available separate components
12) High end Hop Up components later on
13) produced with acceptance from a sampling of the racing community at the "pre-production" level.
14) Not produced if the above objectives can not be met.

I hear you...

CEOBOB

The TJET FACTORY....................

We've had a lot of fun and stirred up tons of interest with the recent thread on both the Howl list and Hobbytalk. I want to take the TJET FACTORY idea to the next phase................... IT IS STILL HYPOTHETICAL and market research is ongoing. My Recording Secretary, Dennis, will carry on the Shares list with the following changes....... You can increase your share amount or decrease your share amount or keep it the same but you MUST let the secretary know your intentions for PHASE II. The purpose for this method is to better keep track of you all should this actually become a reality. Hey, you never know................

Here are some important facts and objectives I would like to state and accomplish in this phase of the operation.

1) The Tjet Factory will be a partnership. I have brought onboard my longtime friend and expert manufacturing specialist, Dan Esposito. Together Mr Esposito and I will see this venture thru PHASE II. I will be CEO and CFO and Mr. Esposito will be our COO. With our extensive knowledge of manufacturing via CAD design, development, injection molding, and Mechanical and Processs Engineering, Mr. Esposito and I feel we have the capabilities to see this project thru to production.

2) Our objective is to plan, design, develop, test, and manufacture the entire Thunderjet solid rivit 1963 rolling chassis in the UNITED STATES OF AMERICA.

3) The chassis will be designed and assembled to the original tolerances and dimensions as drawn on Aurora's blueprints. Yes, I have or can obtain that vital information.

4) Parts, armature, magnets, etc may be offered later for seperate sale but the initial plan is a rolling functional chassis.

5) The initial investment of $50,000.00 for startup costs to get to production is still the goal. Your ROI (return on investment) is still finished product at cost to the extent of your investment. IE, you invest $500.00 and the chassis cost $5.00 to manufacture. You get 100 chassis for free.

To this end I want to start the Shares List for Phase II.

Bob Beers 100 shares
Dan Esposito 100 shares

Remember, you can increase your share amount or decrease your share amount or keep it the same but you MUST let the secretary know your intentions for PHASE II. Let's see where PHASE II takes us people, and thank you for all your support to this point.

CEOBOB

From the desk of the recording secretary.......

I have put all of this information into an Excel spreadsheet. This enables the count of shares to be added by a much smarter and infallible means than me. It also enables me to alphabetize all of the names entered at the click of a mouse. So if your name "disappears" from the bottom of the list, please look for it in it's appropriate alphabetical spot on the rest of the list, it will still be there. If it is not, let me know and I will fix it. This list will also enable CEO BOB and me in our efforts to find you, if we ever get to the magic number of "1000" shares, as the database will have your email address in it also. With just a click of the mouse we will be able to email the whole "T-Jet Factory Employee List". Also, I will be posting this list, minus emails, to this list and any others that are participating, once or twice per day! That will occur about 12PM & 6PM. For those of you that are reading this for the first time and are wondering what the heck is going on, I have uploaded a file to the HOWL list's home page. It is listed under "FILES" and is called The BJET Info! There should be a link here in this email somewhere that will take you to the home page.

If you want to be added to the list please email me directly, or post via the HOWL list. So I do not miss your post, please put the following in the subject line; Tjet Chassis Factory - Employee Owned - Updated List! We would also like to have your email address, so that we can contact you later if necessary, and the list/board which you frequent. We will not publish your email address to the list when we post the totals. Thanks much!

I need the email addresses for the following guy; No one at the moment!
If there are question marks following your name, that means we need to know where you "hang out".

Shares are $50 each!

T-Jet Chassis Phase II List
# NAME SHARES LIST
1 Alan Van Doren 1 HOWL
2 Bob Beers - CEO 100 HOWL
3 Bob Marketos 4 HOWL
4 Bob Mauge 6 HOWL
5 Bob Raymond 10 HOWL
6 Brad Morgan 4 HOWL
7 Brian Light 2 HT
8 Charlie Benson 20 HOWL
9 Chris DeAngelis 10 HOWL
10 Cliff Manley 2 HOWL
11 Curtis Adams 100 BAYHOGG
12 Dan Mueller 100 HOWL
13 Dan Esposito 100 ???
14 Dana Hummel 10 HOWL
15 Dave Huddle 4 HOWL
16 Dave Reese 2 HOWL
17 Dave Rock 5 HOWL
18 Dave Scott 2 HT
19 Dave Street 2 HT
20 Dave Terp 2 HOWL
21 David Martin 1 HOWL&HT
22 David Miskell 2 HT
23 David Parker 10 HOWL
24 David Wilson 2 HOWL&HT
25 Dennis Sieck 10 HOWL
26 Doug Grey 2 HOWL
27 Edward Koshefsky 1 HT
28 Eric Diemer 4 HOWL
29 Gary Boyd 5 HOWL
30 Gene Hedden 4 HOWL
31 Geoff Drake 4 HOWL
32 George Cooley 2 HOWL
33 Greg Carpenter 2 HOWL
34 Gregory Sikora 5 HOWL
35 James Jordan 4 HOWL
36 Jason Pickerell 2 HT
37 Jeff Clemence 25 HOWL
38 Jeff Solarz 5 HOWL
39 Jerry Schmoyer 10 HOWL
40 Jim "Slot Pro" Nagy 10 HOWL
41 Jim Pande 2 HT
42 Jim Smith 2 HOWL
43 Joe Defelice 2 HT
44 Joe Glynn 5 HOWL
45 Joe Kent 3 HOWL
46 Joe Murray 23 HOWL
47 Joe Saccomanno 10 HOWL
48 Joe Stupar 4 HT
49 John Adams 10 HOWL
50 John Balson 10 HOWL
51 John Forlino 5 ???
52 John Shortsleeves 5 ???
53 Ken O'Hara 2 HOWL
54 Kevin "Lucky" Drake 5 HOWL
55 Kevin Chesney 2 HOWL
56 Lance Van Doren 1 ???
57 Larry Bishov 2 VHORS
58 Lendell Peery 2 HT
59 Mark Bissell 4 HT
60 Mark Frazin 20 HOWL
61 Mark Goodwin 6 HOWL
62 Marty Bauer 5 HT
63 Marty Milligan 10 HOWL
64 Michael Eckstein 6 HOWL
65 Mike King 5 HT
66 Mike King (WA) 2 HOWL
67 Mike Vitale 4 ???
68 Nate Hopkins 10 HOWL
69 Neal Abramson 1 HOWL
70 Paul Morack 10 HOWL
71 Ray Wiley 5 HOWL
72 Rick Fair 5 HOWL
73 Rick Vanelli 2 ???
74 Rob Rose 1 HOWL
75 Roger Corrie 10 HOWL
76 Ronald Fields 3 HOWL
77 Russ Chadwell 25 HOWL
78 Russ Upton 4 HOWL
79 Ryan Peoples 4 HOWL
80 Scott Keck 2 HOWL
81 Sean Schweitzer 2 HOWL
82 Tom Baker 2 HOWL
83 Tom Balaban 6 ???
84 Tom Christiansen 2 HT
85 Tom Nylen 2 VHORS
86 Tony Southern 10 HOWL
87 Vance Kinney 10 HOWL
88 Vern Doxtator 10 ???
89 Walter Michaels 5 HT
90 Willy Babcock 1 HOWL
Total Shares - 885
Shares To Go - 115

--

Regards,

Dennis Sieck
Recording Secretary for the "CEO BOB"
partspig@mac.com