ok i have a 2wd truck/buggy that is form duratraxis. i know that dont help much but i dont have my stuff right next to me. im new but and i know im going to spend a lot of time fixing it b/c im will be running a 5.5T-6000kv burshless motor with a eZrun 60A SL ESC, with a 4600 7.2v battery any suggestions on on gears i wont more acc then top end. right not i have a 17t pinon gear and a stock spur gear out of a rtr package.

o does any one know of any tracks close to Charleston,sc the ones that i new are shut down now

Go down on the pinion gear a tooth or two. You'd be surprised at the difference a tooth or two can make? Becareful going to one extreme or the other in one shot. You can over or under gear and start having thermalling issues with your ESC. It can over heat and shut down for its own safety.

Try a 15t pinion gear and if it thermals or the esc/motor are getting too hot to touch after about 5 minutes of running put a larger spur gear on it assuming you probably have an 84t spur right now switch it out for an 87t. This should at least be a gooding starting place for you.