May 16th 1/10, ¼ Scale Open Practice
23rd 1/10 Stimulus Race
( No Entry Fee)
June 6th 1/10 Scale Race
13th ¼ Scale
27th 1/10 Scale Race
July 11th 1/4 Scale
18th 1/10 Scale
24-25th Oval Cup Warm up Race
August 15th ¼ Scale
19-23rd 1st Annual Oval Cup Championship
September 12th ¼ Scale
26th 1/10 scale
October (weather Permitting) 30-31st Hallowen Booger Bash
1/10 scale and ¼ scale.
Closing out the Season.
Best Wicked Body and Costume Wins 200.00
This Closes out our 2009 Outdoor Concrete Oval Season, We are currently working on a deal for an old Skating Rink for Carpet indoor season 2009-2010. We will keep you posted. But it will be a large Flat Track oval and on road racing.


www.two2cool.com

Info Call 814-445-4085
or email Sbrown@two2cool.com

Man you guys have no idea what you are missing the 1/10 scale guys are saying this is smoother then carpet.

Due to lack of interest we have dropped the 1/4 pounders from the schedule.

[edited] Improper language

Shawn,
We are going to Freddies the last weekend of the month and will try to come by and make a lap and try it out. email me you # and I will call you for more info. Thanks

Never mind on the # I just seen it. Thanks

Jeff, Your welcome to stop by. Everyone is Welcomed. I just thought it is ashame that someting like this would go to waste for you guys. the 1/10 scale guys can get by without even changing some of their carpet set up. no bumps no cracks no nothing just basically smooth as glass.

Guys,
we have edited our post; I just received a complaint about using the "F Word" in my post without their permission. It has been edited and we apologize if this has caused anyone harm.

Whats the problem? We all need to work together to make the sport grow. One track will not grow the sport. It will take all of us working together to keep it going. We need new places to race in new areas that helps a lot with new guys getting in and getting people to see the cars that havn't seen them before.

I will remove their name from our link page since I didn't get permission to put it there.:rolleyes:Guys,
we have edited our post; I just received a complaint about using the "F Word" in my post without their permission. It has been edited and we apologize if this has caused anyone harm.

I guess I don't get on here enough because I don't understand. Tim, what link did you drop and why???

The link to another track. Apparently one needs permission from the owner to post their name here on Hobbytalk...I guess...I'm lost here too? I didn't ask for permission to link it from our track link page so I removed it.:thumbsup:
I guess I don't get on here enough because I don't understand. Tim, what link did you drop and why???

I'm with you....:thumbsup:Whats the problem? We all need to work together to make the sport grow. One track will not grow the sport. It will take all of us working together to keep it going. We need new places to race in new areas that helps a lot with new guys getting in and getting people to see the cars that havn't seen them before.

It was not hank From HT. Hank is Great! I change it to a " _ Word" and the forum alarms went off.

I refered to another track, Shop, Race and because I stated the fact i was hoping to run a series with this " Trademarked Shop,Track and Events and try to build up more 1/4 tracks in the Ohio-PA area. But I received the following:


"my name"


"You know I do not know who you are but before you use my name again I sugest you call me "


So thier was no bad language used, but when it was edited it just set the alarms off. But I will be sure not to use that "trademarked" name to talk about the Shop, Events, Or the Track that is named after the "trademark".

Oh' I-C. I saw where your post had been edited by Hank so I thought he removed their name?

But you still aren't supposed to mention the track's name in any posts without permission...right?It was not hank From HT. Hank is Great! I change it to a " _ Word" and the forum alarms went off.

I refered to another track, Shop, Race and because I stated the fact i was hoping to run a series with this " Trademarked Shop,Track and Events and try to build up more 1/4 tracks in the Ohio-PA area. But I received the following:


"my name"


"You know I do not know who you are but before you use my name again I sugest you call me "


So thier was no bad language used, but when it was edited it just set the alarms off. But I will be sure not to use that "trademarked" name to talk about the Shop, Events, Or the Track that is named after the "trademark".

i am not supposed to use the name without premission that is correct.

Well, I still don't get it. If the "bad" word was used with the "trademarked" name I might just be a little upset too. I like to think that I am pretty perceptive but maybe I'm not. I don't know of a track owner, including clubs, that isn't all about promoting 1/4 scale racing. Could it be just a misunderstanding or a lack of communication? Jeff still has the right answer.

Well dude, I'll go back and edit all my posts so that it doesn't leave a dark cloud on your thread over such a petty issue.

Well dude, I'll go back and edit all my posts so that it doesn't leave a dark cloud on your thread over such a petty issue.

no do not worry about editing. I thought it was an open forum. but i guess I am the one that was wrong.

No Brent, the trademerk name was substituted with "_"word instead of the real name due to the threat. Put "f" in the blank. Forum language filters catch these types of abbreviations as foul posts.


Well, I still don't get it. If the "bad" word was used with the "trademarked" name I might just be a little upset too. I like to think that I am pretty perceptive but maybe I'm not. I don't know of a track owner, including clubs, that isn't all about promoting 1/4 scale racing. Could it be just a misunderstanding or a lack of communication? Jeff still has the right answer.

10/4... but like you, I'll leave them out of my conversations about 1/4 scale.no do not worry about editing. I thought it was an open forum. but i guess I am the one that was wrong.

1/10 scale on the track. The smoothest TRACK ever made. This is during todays 40-50 MPH wind storm. We should be finishing with the primary construction this week. Then it is landscaping and spectator stands as well as the new Dirt oval that is being cut in now. More to come. Hopefully one day we will be able to include the 1/4 scale cars and expand the sport further east. As of know i guess it is just not wanted. Soon maybe.:thumbsup:

http://www.youtube.com/watch?v=Zd5RzgMq170

That is my pretty pink car in the video. LOL. This track is as smooth as glass. The grip is consistent from bottom to top and we had a blast running all day. Even the 40 mph winds didn't cause too much havoc for our little 1/10 cars. This track makes me want to try 1/4 scale. You guys are nuts if you don't take advantage of this track.

That is my pretty pink car in the video. LOL. This track is as smooth as glass. The grip is consistent from bottom to top and we had a blast running all day. Even the 40 mph winds didn't cause too much havoc for our little 1/10 cars. This track makes me want to try 1/4 scale. You guys are nuts if you don't take advantage of this track.

I'm sure that the quater scale cars will come. You must understand that this years schedules were set as of late last year or early this year. Many 1/4 scale racers plan where they are going each week far in advance. Give it time. As a quater scale racer I am always looking for a different track to try.:wave:

Thanks:thumbsup: Main thing was to get some 1/4 pounder expert to come out and work with us some during the construction.

I'm no expert but I will see you in a few weeks. If you can make it up for the Tri-state race at freddies we wold love to have you set in on a big quarter scale event just to see how it is ran. I will go back by and make a few laps at your place sunday.
See you soon shawn.

COOL! I will try to make it up.:thumbsup:

That is my pretty pink car in the video. LOL. This track is as smooth as glass. The grip is consistent from bottom to top and we had a blast running all day. Even the 40 mph winds didn't cause too much havoc for our little 1/10 cars. This track makes me want to try 1/4 scale. You guys are nuts if you don't take advantage of this track.

I'm just happy to see you runnnig a car again Bob.:thumbsup:

Looks like a really nice track.

I'm just happy to see you runnnig a car again Bob.:thumbsup:

Looks like a really nice track.

Thanks Sonny! :thumbsup:

Free bump :):thumbsup:

thanks

we are still looking for some 1/4 scales to come lay some laps down. Anyone game? Closed session for you if you guys can arrange it.

Wish we were closer. I would be there. Any guys that live close to the track race Quarter Scale?

doesn't look that way. I went up and watch the race last week, and would like to see some here practicing. maybe you got a freind up this way that could drop in for a few hours.

Jeff, just send me up one of those sprinters you have, LOL

postedsome 1/10 scale video up, hope to get a video of a 1/4 pounder on the track soon! Also we have the dirt oval which is 230 ish ft 25 ft wide which should be able to handle 1/4 dirt cars I think. never seen them run!:confused:

http://www.hobbytalk.com/bbs1/showthread.php?p=2899389#post2899389

Guys, I know you do not like the Concrete Oval, LOL but we are adding in the dirt oval which i think is going to to small for 1/4 scales.


205 ft inside line, 325 on the outside 25ft Wide.

use this link and scroll down to see the construction pics.

http://www.two2cool.com/category_s/146.htm

:thumbsup:I like it. Smaller track makes for so good racing. Guys, I know you do not like the Concrete Oval, LOL but we are adding in the dirt oval which i think is going to to small for 1/4 scales.


205 ft inside line, 325 on the outside 25ft Wide.

use this link and scroll down to see the construction pics.

http://www.two2cool.com/category_s/146.htm