Cnc Machined Billet 6061 T6 Aluminum Toe Alignment Tool Fits Most Dirt ,carpet Or Road 1/8 Or 3/16 Axles.

This Tool Allows You To Adjust Front Toe , Very Useful On Carpet, Dirt Ovals ,and On Road Rc Cars With 1/8 Or 3/16 Axles. Just Line Up Left Block With 12" Long Slide. You Can Then Check The Right Block To See If Your Car Is Toed In Or Out, And Adjust From There. I Have Made These Toe Plates For A Few Years And Everyone Who Has Bought One Has Been Happy With Them.
I Have Recently Started My Own Machining Shop With A Parner And I Am Now Able To Make These And Several Other Custom Parts On A Regular Basis.

$30 EACH FREE SHIPPING WE HAVE 15 IN STOCK
We except paypal

Any Questions, Feel Free To Ask

Thanks, Dave











Car Is Not Included

I have an older set of these, it gets your alignment set correctly in seconds..
A must have tool for your car.

Chuck

PM Sent

Everybody that has purchased one has liked them alot.
Thanks, Dave

Just a reminder You need to be a Hobby talk supporter to resale items you make
You can look it up here http://www.hobbytalk.com/bbs1/faq.php?faq=supporter#faq_supporterwhat

How well does it work if you are running an offset front end?

I would say that there would be no problem with a offset front end.
if you are talking about 1/32 or a 1/16 or something. Still I don't think that there would be anything that would bind up if it was offset even more.
thanks, Dave

I have 2 toe plates left, then it will be probably 1 or 2 weeks before I can schedule machine time to make some more.
I would like to thank everyone who has bought one and who has shown interest in them.
Thanks again, Dave

I have 1 toe alignment tool in stock.
I have material to make more and will start on them at the end of the week.
Thanks, Dave

These are very useful tools. I bought one, and it is precise and well done. I've used it on a RC10L4O and an RC10T4 with excellent results!

Thanks Crusty,
I am happy that you like it, that is what I like to hear.
Dave

I finally got around to setting my car up for racing this weekend, McPappy Dart for Oval, and got to use the new tool for the first time. Having owned the original version of this that was available many years ago, I always felt it was a useful, visual tool, however, to compare that tool to "this" tool is like comparing a tape measure to a micrometer! This tool give you an immediate, and obvious picture of what you have to do to get the toe you want. The Blocks are the same thickness as the Channel, so that when you get to "0" toe, the Block is square with the outside of the Channel. For accurate front-end set-up I now wouldn't be without this tool, and my KSG Camber tools. Great product!!!!!!

Thanks Napolean
I am happy that you like it. I try hard to make a good quality tool.
Dave

I'm sending another PayPal to purchase one for a friend of mine, who was very impressed with the tool. Please check the instruction section of the PP for info on shipping it. Thanks Jim

I'm sending another PayPal to purchase one for a friend of mine, who was very impressed with the tool. Please check the instruction section of the PP for info on shipping it. Thanks Jim

Dave your alinement tool is awesome I sent you pm.

Thanks RPM.

Dave, That Tool Is Fantastic ==napoleon Sent You A Order For Me ==please Send It Asap ==2nd Day I Will Pay Diff. ===dom

Thanks guys, we strive to make a good quality product that is useful to alot of people.
Dave

Really simple and effective looking design. An idea popped into my head looking at this. Would it be possible to incorporate some type of camber adjustment measurement?

With respect to the camber adjustment, when I tried out this tool at Maximus a few weeks ago, I used my Team Integy camber gauge and it fits in the "slot" of the channel easily. This gives a very accurate measurement of the camber. The RPM branded camber gauge is too wide to fit into the channel.

Later,
Greg

I would like to make one, I think that it would go well with the toe tool.
Thanks for the ideas, Dave

We Now Have 25 More Toe Alignment Tools In Stock As Of 5-6-09[

Dave you should have a email....thanks

Thanks RCTVLIVE
I received email and we are excited about the opportunity.
I will send a email to you.
Thanks, Dave

Thanks RCTVLIVE
I received email and we are excited about the opportunity.
I will send a email to you.
Thanks, Dave

I received my alignment tool and tire extentions for the calibers -top notch!
This is a MUST HAVE TOOL for racing!:thumbsup:

Thanks RPM
I am happy that you like it.
Dave

pm answered
Thanks, Dave

Thanks bullet,
The Toe Plate will ship out today.
Dave

It has been a busy week, we bought a CNC lathe, so we can start making turned parts. I would like to make wheel spacers for the dirt cars and maybe body posts for the pan cars.
Toe Alignment Tools are in stock.
Any ideas would be welcome.
Thanks, Dave

Thanks jferland4,
The toe plate will ship today.
Let me know how you like it.
Dave

Hello Dave, great looking product i would like one.
will pay with paypal.

Thanks Bond Bond, PM sent.
Dave

Payment sent last night.
Thanks Dave,
Brian

I shipped the toe tool out today.
Thanks, Dave

dave were is your caliper extensions?
Tom

I still have them available, I will try to get a thread up to the top again.
Do you have any info on the axle gage. I think it would be a good product.
Dave
I am thinking of having the toe tool anodized, we have some parts coming up that need to be black, so I might send a couple toe tools up with it to be anodized black.

dave you have a pm

bump for a great product and person

Thanks Tommy,
I have toe plates in stock ready for shipping and hope to have other products soon.
Dave

I am shipping a couple toe plates out to be anodized black.
I am going see how it would look. I would also like to machine some lines on the slide 1/32 apart to be able to get a easier measurement. It will take a couple weeks , so I will keep you updated.
Thanks, Dave

winter is getting closer get these while you can.

Thanks tats,
We have toe tools in stock.
Black anodized toe alignment tools are back from anodizers and will be machining lines on them in the next week when I can get them in the mill.
I will add some pics soon.
Dave

Dave hello, will i be able to get mine updated anodized Black and marks put on????
Best tool in the pits.
Brian Bond From the Stryker Nation.

I would like to get one finished and check it out to make it is right and I will put pics on here.
We are trying to have someway to uprade to the black anodized part from someone who has a toe tool already. The only problem is that the anodizers have a minimum charge on parts. It would cost too much to get one tool anodized. I would have to ship around 10 at a time or put some tools in with another group of machined parts that get anodized black. Right now that happens about once a month.
If I can ship in a group it will work out to around $10.00 per tool shipped
It could take a couple of weeks for the process though.

I will keep you updated.


Thanks Dave

I am very interested in purchasing one of your tools. Just wandering if you were considering maybe doing some in blue if that were the case I would really be interested.
If not please let me know when the black ones are ready and I will take one.

Thanks Paul

Thanks Paul,
Black will be the only other option right now.
I will post some pics on here when the black toe tools are ready and will let you know.

Thanks again, Dave

Got the front end tool today I allso had the first version of the tool a while back this one works nicer for sure thanks for the fast shipping and great tool.

Jake:thumbsup:

Thanks Jake.

D&T, how do I order one of your toe tools? Can you post or PM me the info?

--Cory

Thanks Corey,
PM sent.

D & T I'm interested in one of your pieces, could you tell me how I can get one. you can pm me. Jason