The start of our new thread and another awesome season.

This year will be better than the last which was awesome if I may say so my self!

Duke.

Proscale R/C Raceplex
4405 E. Sternberg Rd
Fruitport, MI 49415

email...proscalerc@hotmail.com
cell...231-750-1181

:thumbsup:yeeee haa Nitro oval. :thumbsup:

:woohoo: NITRO AND ELECTRIC OVAL :woohoo: maybe i can talk the wife into putin up some good pics of the track

:thumbsup:yeeee haa Nitro oval. :thumbsup:


Scott,
I need to get you in to ALL the classes we have out here for the oval.
It won't cost to much!:thumbsup:

Duke

Scott,
I need to get you in to ALL the classes we have out here for the oval.
It won't cost to much!:thumbsup:

Duke

Ha I'd love to but you would have to get that wheelchair spot done and probably need you to steer for me. The good news is she'll leave me with one eye to walk out the door with. :thumbsup: :wave:

Ha I'd love to but you would have to get that wheelchair spot done and probably need you to steer for me. The good news is she'll leave me with one eye to walk out the door with. :thumbsup: :wave:

if your lucky that is

right to all of that!!!

Does anyone know how to pull the rules from the old thread and put it on the 2009 thread, page 96 and 108!?!??

Duke

OK,
Rules, rules, rules! Here we go.

13.5 Late Model stock class.....

1. OEM 4wd cars . OEM parts only ,no after market parts allowed except turnbuckles and ball cups. Battery slide tray allowed if offered or is and option by the OEM. (Approved cars and parts example would be, RTR, Team, Factory Team kind of items)

2. Sedan tires only. 30mm max width. Foam or rubber tires only. No pin tires. No cut tires.

3. McAllister bodies only. All bodies must be painted to resemble real race cars with at least one number located on the side dam and right side of body, 2" tall min height on body and 3" min for side dam. (for scoring purposes)

4. Side dam to be clear plastic (not painted) 5.5" X 16" overall height and length, and will be measured overall. Side dam not to extend past the rear of the body more than 1", and not to extend forward of the front axle center line. Rear spoiler max length 2". Side Dam to be mounted directly to the body.

5. Any 13.5 brushless sensored or unsensored 540 size motor only.



10.5 Late Model class....

1. Same as last year. Cut tires and all!



Open Late Model class....

1. 1/10 scale 4wd based cars only. Any and all mods welcomed, the more the merrier.

2. Cut tires allowed. No pin tires.

3. No motor limit.

Nitro Late Model rules found on page 96.

Sincerely yours,
Duke Breadshaw.
"your humble host"

Nitro Late Model rules and classes......


Late Model Novice....

This will be a run what you brung class. (that will keep the cost down for the newbees.
This class is set up for the fellas that have never run an R/C car or are having a hard time learning to drive on the oval.


Late Model Stock class....

1. 4wd cars. Only OEM parts allowed. No after mkt, no custom made or one off type parts/chassis.
example: If you are running a NTC3, you can ONLY use.....
RTR, Team or Factory Team parts.

2. Sedan tires, 30mm max width, no cut tires, rubber and foam only no pin tires.

3. Mcallister Late Model bodies only, painted to represent real race cars. At least one number on the right side of the body 2" min height and one on the side dam 3" min height. (for scoring purposes)

4. Side dam / Side Fence. 5.5" x 16" max.
5.5" height measured over all from bottom edge to the top edge (vertical measurement). Side dam can not go any farther forward than the center of the front axle and no farther than 1.5" past the rear of the body. Clear plastic side dams only. Side Dam must be mounted directly to the body.

5. Spoiler height/length 2" max. Measured from the top of the rear deck.

6. Any motor and pipe combo. Stinger out side the body allowed.
Single speed cars only. Cars with 2 speeds must be locked out.


Late Model Open class ....

1. 1/10 scale 4wd cars. The more mods the merrier.

2. Run what you brung type class. No pin tires.


Electric Late Model rules found on page 108.

Thanks,
Duke Bradshaw
Proscale R/C Raceplex
231-750-1181 cell

There you go Duke!:thumbsup:

There you go Duke!:thumbsup:


Your a gentleman and a scholar!!!!:thumbsup:

Thank you,
Duke.

gotta go go go go turn left....:woohoo: hold on!!!!

anyone remember wat tires we ran on the 13.5 trucks last year

Ok if anybody is still thinking of a wheel chair spot, I came across a big rack they are throwing away. It's about 6 feet wide, 15 ft long and maybe 2 feet deep. It's a big rectangle thing they used to hang from the ceiling to hold lights and other things. It's made from 1 1/2 or 2" alum square tube. It has cross beams every 2 ft or so. If you cut it in half you could use one end for the platform and maybe split the top and bottom of the other half and maybe make a ramp, not sure. I might be able to get 2 of them, but I need to know soon, like there tossing them tomarrow or thursday soon. I forget who wanted to build one, but if this sounds like something that would work let me know. I was trying to figure out where it could go unless the timing booth is moved.
scott

Ok if anybody is still thinking of a wheel chair spot, I came across a big rack they are throwing away. It's about 6 feet wide, 15 ft long and maybe 2 feet deep. It's a big rectangle thing they used to hang from the ceiling to hold lights and other things. It's made from 1 1/2 or 2" alum square tube. It has cross beams every 2 ft or so. If you cut it in half you could use one end for the platform and maybe split the top and bottom of the other half and maybe make a ramp, not sure. I might be able to get 2 of them, but I need to know soon, like there tossing them tomarrow or thursday soon. I forget who wanted to build one, but if this sounds like something that would work let me know. I was trying to figure out where it could go unless the timing booth is moved.
scott

Yes, yes.
If you can get it we should be able to do something with it!

Duke

I can get one for sure, will try for the 2nd one also. see ya

you watch.. you will get guys racing from the wheel chair driver stand.. not like its a bad thing.. i might try it

you watch.. you will get guys racing from the wheel chair driver stand.. not like its a bad thing.. i might try it

Not sure if you qualify Rob!:wave:

Duke

dang! i thought i could run with the short stand, just i ran with the short bus.... JK LOL

if you show up in a wheel chair your good

its not worth the trouble I like the big stand I can see the track just fine

OK got them both, I'm going to try dropping off with the car trailer thursday or Sat morning if it's not raining. If we don't use them I have to bring them to Black River for credit. see ya.

thursday is suppose to be ok until late when it suppose to rain into friday afternoon, saturday is suppose to be mostly sunny all day..maybe get some work done sat..... hopefully

what day is the first race and are we starting earlier this year than last year cant wait to throw it sideways and go fast :woohoo::woohoo::woohoo::wave:

supposed to be sat the 18th is the first race

I'm heading up to drop off the racks. Duke I'm stopping by. = )

scott you coming out sat??

I was out there yesterday and today. he he.

you lucky boy you!!!! getting to leave when ya want too..

3 kids and 5 dogs (watching 2 of our day care's puppy's that need a good beating) who wants to go home.

right.. the oval is lookin awsome right now also.. looks like dukes been doin some work on her

I think your right, smooth as glass.

well of course im right....

2 more weeks! can't wait to let this mod latemodel breathe

hey Duke did u get enough "stimulus" money rom Obama to put a roof over the track so we can run in the rain? lookin forward to the opener on the 18th

randy ran his mini slider on the track today, the oval is in really good shape to play on, hopefully the weather man is lying about the snow (the idiots) i wanna play sooner than later

i heard a rumor that we were gonna try to start earlier than we did last year ass in earlier in the day is that true:wave:

its up to duke but i would like to get out of there a little earlier and offroad is normally done by 4 anyway, the way the offroad is going it wont be done at all so we can race when ever we want on the oval.... cant get the track dry enough to do anythng with it, very fustrating!!! maybe we can get started about 5:30 6 and maybe push the races through a little faster with less time inbetween races.. no waiting of people, that sort of thing

whit out off road racing can we run more practice on the oval on the 18 I plan on coming up if the weather is good

im hoping that the weather isnt so bad sunday night andd monday, dont look like its going to be to bad tuesday and partly sunny the rest of the week, hoping its will not hurt the offroad to bad i wanna get it done before the 18th so we have a full day of racing

for the offroad is there a two wheel drive truck or buggy class i have a associated t3 thought abought maybe runnin would have lipo and brushless

sure.. we would love to have more electric show up to race.. we want to see more come out to play like slashes, t4, t3, losis, buggies and trucks, 4wd's, thats why we are rebuilding the track to accomidate the smaller scale cars without destroying them. the track last year was rough on the electric, most came off broken and always marshalled... the track is going to be an easier and more open for every type of class

are you still hoping to havw the off road ready for the 18

we would like to.. it depends on if we can get the track built this week through the weekend.. Randy, Duke, Scott lets get to work, hopefully the weather holds out and stays nice and sunny

I have a stump grinding job tues, water tests for the health dept wednesday, meeting with Duke Thursday should be good Fri and Sat. I'll make it to work at Trendway somewhere in there. If it's nice and we can work on the track I'll take Friday off, need use of the loader though to move timming box.

we are thinking of moving the "big wooden box" towards the oval more so we can put in the wheel chair ramp and DS on that end...

Duke,
Whats a good time for me to come and get a couple of bodies a side dams?

Duke,
Whats a good time for me to come and get a couple of bodies a side dams?

What time do you get out of work?
Later in the evening works the best for me.

Duke

almost time to get those gas trucks ready!

almost time to get those gas trucks ready!

thats the only thing that is ready here, I need to get moving.