eric do you think a 6 cell tray will be available later on?

Eric Is the new car woven or layerd graphite?

Toy

The new car is woven as is everything from hyperdrive these days,I finally saw the car this past weekend and it does look awsome, yea I've got $250 put aside too.

37 Racing..The car looks NOTHING like an Assasian. And all the ideas on the car are pretty original.

There is already a 6 cell tray T-town...its actually 7 cell trays and 5 cell trays. You will understand why when you see them. The cars will be .095 woven.

eric a

awsome cann't wait

Eric,I have heard there will be a conversion kit available.Will it use anty parts from the510?Also do you think the conversion will be available the same time the kit is?

Yes HoopD1...There is a very very good chance their will be a conversion. But the only parts that you will use off the 500-510 will be the bumper and pod plates. And of course the front end, shocks and axle/hubs. Im not sure when it will be ready to ship though.

The bumper is the only interchangable graphite piece and the rear bulkheads are the only interchangable alumn pieces.

eric a

Hey Eric, will this new car be available in the 1/12th scale oval too? I sure hope so.:roll::rolleyes:

Thanks Eric,I wish all companys would offer conversions or just the graphite parts.I have way more plastic shock mounts,Ae front ends,Ae shocks,body posts,axle,hubs and stuff than I will ever need:lol:

Hyper-phobia....we are working on a 12th scale also....If someone gets a prototype done by the nats (unlikly though) then I will run it there to test it some.

eric a

I thought I was going to get one but I guess thats what happens when you get old they just put you in the back and forget about ye !!!!! SEE YA HACKSAW:devil:

Hey Saw...Barry is cutting some this week to try and get to DR's. Call him and see if he will send ya one.

eric a

I got $250 burning a hole in my hand too. EA, when are they supposed to hit DR's shelves or do you know??

the 1/12 hopefully will bw cut this week. barry is trying to get a few done to run at the nat's at dr's place. they won't have all the features of the production cars but the most important ones. we need to test some of the funny stuff. things like new pod plates and other aluminum items just take more time to design and test then the graphite parts do. you will get the general idea what i'm talking about when you see the 1/10 and 1/12 cars. i talked to barry and he is really trying tohave cars for this weekend for sale. not 100% so don't go flying off the handle if there not at the track this weekend. just ask anyone theres alot of little things that go into putting a complete kit together. mike valentine team hyperdrive r&d:lol:

btw any one with $250 in there pocket just burning a hole you can send it to me. :wave:

i DONT HAVE 250.00 BUT i DO HAVE A ROCKET IN MY POCKET,,, GIVE ME CALL YOU USED CAR SALESMAN..HEHEHEH srm:o :o :rolleyes:

steve just tried your cell no answer. i left message my work number.

Steve you call that thing a ROCKET............he he

!

And where were you after all that 10 car main stuff we only had 8 racers total in 19t so no need to worry about to many in the mains !!!! Eric was the only one fast in 19t with the new car I think he sleeps with it !!!!! HEHE SEE YA HACKSAW

It's the end of the weekend and still no PIC'S of the new car,whats the Motts on that !!!!!!!!

Spotted the new car this weekend(thanks EA), just got to say, its awesome. I'm sure pics will be available soon. It's worth the wait.

Disruptor the pics have been sent to the Hyperdrive webmaster and they shoule be up on hyperdrive's web site soon.

Glad you liked the car Drave. They will be shipping to Distributors Monday or tuesday.

eric a

Looks like it will be a few more weeks before the rest of us get to see the car then!

thanks

OK guys , the first shipment went out today. percentage drivers can place their orders now. I should be shipping the 2nd batch end of the week.


thanks
barry

For those that have been waiting (like myself) for a pic of the new car, Bruce at www.rc4less.com has the box cover pic posted on there under Hyperdrive kits.

From what I can see, its interesting but I'll have to wait till after the nats.

Is the new car woven or sheet graphite like the old HD's

the new car will only be .095 woven graphite.
http://rc4less.safeshopper.com/17/308.htm?61

Do you run the new car as it comes (box stock) or do you use the adjustable caster blocks, adjustable shock mount, and the frontend center brace?

The car looks real good in the picture - lot's of adjustability.

Tom

hey mickey
whatup man!!!!!!!
hey car looks good congrats on a STELLAR design.
i think most people will be faster with just the box hahhaha
See you soon eric

Which servo do guys recommend I'm thinking one of those Futaba wide thin ones but can't think of the #? I'm putting my parts list together for the 0700

Best servo on the market for oval is the JR7005



Manufacturer: JR

Part Number: JRPS7005

Product Name:
7005 LO-PROFILE HI-SPEED SERVO

Low-Profile (Coreless) Specifications

Torque:
62.6 oz./in.

Speed:
.19 sec/60°

Sweep:
.16 sec/60°

Weight:
1.31 oz.

Size:
.88x1.73x.93

AABearing:
Dual

Idle:
8 ma

Motor:
Coreless

Uses:
Aileron servo for sport/competition aerobatic plan


0r
Manufacturer: JR
Availability: Jul 25 2001
Category:
Servos

Part Number: JRPSDS9411

Product Name:
DS9411 PREMIUM DIGITAL SERVO:MID
Torque..........................................82 oz/in
Speed...................................... .15sec/60°
Size...............................0.71 x 1.41x 1.03
Motor...........................................Co reless
Gears.....................................Alloy Metal
BB................................................ .....Dual
Weight........................................... 1.36oz
Deadband.................................. <.001ms

7005

Thanks Flack I'll have to check that one out, I've never ran a JR servo always Futaba.

Also added a couple of extra pictures of just the updated graphite parts. Click the link under "SPY Pictures" at www.rc4less.com

BT

The chassis looks very nice!
:thumbsup:

sorry for off topic

i wish the 7005 wasnt so expensive :(

TOME57 i usally run the stock shock mount most places, but like the aluminum one when running the short wheel base options so i can still get the receiver behind the servo. since you can run the shock mount back farther but up to still get extra force on the front end. i run standard castor block on the right front and standard or aluminum on left front track dependent. hd will have a new castor block soon, which i will run every where since it will also have the stock asc hole included. i always used the front end brace but now with the extra graphite adjustment pieces bolted to the chassis flex is reduced not needing the brace anymore.

id38 thanks

pepe i always run the 9102 futaba servo they do have a new digital replacement for it don't now part number

racinfella78 eric anderson was #1 and #3

bruce thanks for the kind words and all the help at sandhills i know it was a long time ago but never really did thank you. can't wait for snowbirds see you then.

race3737 thanks

i think the idea with the battery tray extending back by the cross brace is awsome..great idea with the tee plate spacer..car looks great..george rodriguez..p.s are both batt trays and top plates included in the kit??

Great looking car, but I`m still confused with the normal cars, looks to complicated for me. But nontheless a great looking car.

rcer6x thanks, t-plate spacer:confused: the hy0700 will come with only the 5 cell tray and standard top plate. the 7 cell tray and offset top plate are optional parts.

FASTALJR any help you need, just come on over, me or someone will help.
:lol:

http://rc4less.safeshopper.com/images/bm0o0qyt.jpg
http://rc4less.safeshopper.com/images/bm0o304a.jpg
some more pictures for those interested.:wave:
hopefully the hd site will be updated soon.:devil:

there has been a few minor changes from the pictures posted above. theres more material behind the left front, to be able to run the 9102 stly servos, when using the short wheel base. also the front end adjustment plates are thiner the ones in the pictures were .095, now .0625 to match the asc silver washers. the battery tays also have a slot in the back for tapeing the cells if you split the pack but don't move them forward. the cover shown on www.rc4less.com should read 3 bumper locations.

http://rc4less.safeshopper.com/images/bl130pi6.jpg

Car look great VALENTINO, I have my phone on today ... I meant to call you last night but I had to go to Dinner with the younger version of me... SRM:eek: :eek:

who arron:lol: ok i'll call

also to add there will be rear steer available. i see that it's not mentioned. 1/4 and 1/2 degree lower pod plates. look for other goodies soon.

there appears to be an aluminum piece with 3 holes in front of the botom plate in the pics...i am assuming it is to space the t plate from the bottom plate?...no more damn washers!!....cool..

the aluminum plate is a support, for the crossbrace. since the left standoff is moved toward the t-plate the cross brace was flexing more then i wanted. so the brace stiffens the cros brace. but hd will also be making t-plate spacers but not available yet.

rcer6x the washers under the asc t-plates are a great tuning devise. remove the middle one and the t-plate gives a softer rear suspension. the problem with full length spacers are that, and each t-plate is a different thinkness. .063, .075, and .031 for spring steel.

Mikey I`m way beyond help lol!! just ask miller, hes seen my pity of a pan car. I also have to get the bunny hope dance step patented for my 4 cell mod car. Besides if there was a driver in my car the last time I ran mod, he would of looked something like this after I was done----------->http://smilies.uniquehardware.co.uk/cwm/cwm/rcain.gif

The car looks really nice, ALOT like another Oval chassis I've been looking at though. Especially the cutouts around the "normal" speedo mounting area. :devil:

The 0700 Car isn't anything like any other car that I have seen........I have owned several.......HD 510's,HD 0500, KGB, Adrenaline's, ADX (new car).........

I am sitting here looking at my ADX and the 0700 EASE.......I can see where it could be similar to the ADX (maybe the L3O too) but it is different around the speedo area.......

Well, gotta go and start assembling the 0700.......

Got mine on Tuesday. Car is awesome, can't wait till the weekend, so I can get started building it. Rocketkiller, when are the new caster blocks you spoke of going to be available??