Yes 0700 car. :thumbsup: Running mod 4 cell also

Mike

Did you get all your green parts yet :lol: or are you still wating

Mark

so what would changes to the car would u try if its turning in great, free in the middle then pushes just a little coming off. its perfect everywhere else just tight coming off the corner.

Donnie

I know I am no expert on this thread, but why don't you try and work around with the sideshocks. I had problems with that comming off and I was just adjusting the shocks until the car clicked. Just a thought.

Mikey V, going to Marshalls Saturday???

If I switch from the graphite t-plate to the metal Hyperdrive t-plate, should I change the spring too? Both are medium.

Markey 86 no i haven't ordered any yet.

Donnie_99 try harder rear tires or just rr.

volcomxcore yes i will be at marshalls. if i don't drive off theroad getting there leaving at 5:00 am side shocks do work buy will change turn in.

MK Race med is realative. three t-plates hard med soft not meaning you can compare fiberglas graphite or spring steel med to med. the spring steel normally needs a heavier weight oild to keep the same effect as the fiberglass plate and graphite one. so if you running 40 wt with fiberglass run 45 or 50 wt with spring steel.

Thanks.

Thanks.

is the hyperdrive steel t-plate stiff,med it didnt say on the pack

Ok guys, here is some news for all fo you 0700 racers. We have started shipping the new Team Edition Red Kit and have even more news, we have worked out a deal with CRC to put their clicker shocks in the team kits.

If you have not seen these shocks they are modeled after the HPI shock with a 4 stage Clicker piston. They are a great edition to the kit.

We are working on the website again, FINALLY. LOL!!!!

We will have pics of the new 1/12 oval kit and the one piece 0700 chassis ( SSE PRO 2).

The SSE PRO 2 is a 0700 with 6 cell battery tray all in one piece. All
you need is the chassis and a .995 standoff to convert to this chassis.

OH YES, there will be pics of the team edition red kit.

Thanks for all of your support and good luck racing.

Barry Hill
Hyperdrive Racing

Ok guys, here is some news for all fo you 0700 racers. We have started shipping the new Team Edition Red Kit and have even more news, we have worked out a deal with CRC to put their clicker shocks in the team kits.

If you have not seen these shocks they are modeled after the HPI shock with a 4 stage Clicker piston. They are a great edition to the kit.

We are working on the website again, FINALLY. LOL!!!!

We will have pics of the new 1/12 oval kit and the one piece 0700 chassis ( SSE PRO 2).

The SSE PRO 2 is a 0700 with 6 cell battery tray all in one piece. All
you need is the chassis and a .995 standoff to convert to this chassis.

OH YES, there will be pics of the team edition red kit.

Thanks for all of your support and good luck racing.

Barry Hill
Hyperdrive Racing

good job Barry i love my car so far. heading to daytona to race this weekend .

Donnie

I need help selecting a new servo for 0700. Any recommendations? Is digital better or worse? What are the advantages of coreless vs. 3 pole? Micro to save weight or standard? What about speed? Plenty of racers are willing to suggest what they have, or like, but it would be nice to hear something a little less biased. Maybe someone can explain how to choose a good servo and why. I race on a flat carpet track primarily 4 cell stock. :confused:
Sorry if this is the wrong thread but it seemed like a good place to start.

1loosenut, I would not recommend anything but a digital servo. There is an amazing difference, the digital will center the same everytime. The only other thing I look at is torque, anything over 60 oz. @ 4.8 volts. I use a Futaba S9550 for my 1/10 cars. and JR DS3421 for 1/12 cars. The JR is a mini servo, both are digital.

Hi Danny sorry we missed your race, one of these times we will make it! How does the speed compare on the Futaba to the 9603 I think we have?

Mike, the 9550 has a speed of .14, the 9602? is .11, not really a significant difference. But the torque is almost twice as much on the 9550 and the digital factor.

Great Job Barry the CRC clicker shock is the best ... It also accepts Associated style pistons .you just need to shim them properly to work It also can use HPI pistons .If anyone need help with these units let me know I have been useing these for 1 year already....SRM

pic of the sse2 chassis!

pic of the sse2 chassis!

Looks to be real close to a 0500 chassis.

pepe, you are right it is like the 0500 in that it is based on the 6 cell 0700 but all one piece.


barry

Barry can you off-set this car for concrete etc. Also YGM.
Jason H. :wave:

Jason, yes you can offset the car.
Give me a call in the morning, I need to talk to you.

thanks
barry

Just have to say that Joe and Barry did a great job on the 0700 red team edition that would look amazing on the sse pro 2 chassie thats what im running for next season..

Barry can you tell me if the red hubs are available for running the car offset?

Hyperdrive Man, you can get the SSE PRO 2 team edition.


Mike M, Yes we do have the red offset hubs.

thanks
barry

barry when will oyu be geting the green stuff in. how is your own anodizing comming out, have you had a chance to do any more with the unit you bought. i was really looking for black parts and screws. how about it. the mv ride. what did you think of the mini 700 changes.

barry when will oyu be geting the green stuff in. how is your own anodizing comming out, have you had a chance to do any more with the unit you bought. i was really looking for black parts and screws. how about it. the mv ride. what did you think of the mini 700 changes.


Whoa, whoa. Hold on Mike, Black is my color :lol:

Eric Dimmick
Darkside Motorsports

Hyperdrive Man, you can get the SSE PRO 2 team edition.


Mike M, Yes we do have the red offset hubs.

thanks
barry

Where can I get one? OUT!

try msa or rc4less both places should have them. if you can't find them there call hyperdrive and they will point you in hte right direction.

Does anyone have pictures of the new chassis. I would love to see it.

Never mind, I found it posted earlier in this thread :o

anyone have pics of the 0700 with all the red stuff?
haven't seen one yet...

I've got a red one and I think it's the "bomb"! Added a small order from fastener express to finish it off. Look cool! :thumbsup:

Sorry no pics though...... :(

Hey Mark...bring your digital this weekend and shoot a pic of my ride to post.

Mike V, Our anodize tanks should be here Friday or Monday. We will have red, green, and black to begin with.

I cut one of the new 1\12 oval and it looked great, but sent it to R\C CAR Magazine, along with Team 0700 and Team SSE PRO 2 for an oval article in the July issue. I have the 1\12 and sse pro2 but no box cover or instructions, it is tax time and do not have time this week to work on them.

The website will probably be down soon to move it to a new host, we it is changed it will be completely updated with all new cars and pics of all after market parts.

barry

Quote:
--------------------------------------------------------------------------------
Originally Posted by MIKE VALENTINE
barry when will oyu be geting the green stuff in. how is your own anodizing comming out, have you had a chance to do any more with the unit you bought. i was really looking for black parts and screws. how about it. the mv ride. what did you think of the mini 700 changes.
--------------------------------------------------------------------------------

Whoa, whoa. Hold on Mike, Black is my color

Eric Dimmick
Darkside Motorsports
---------------------------------------------------------

Wait a minute Eric .... We've been doing the Maverick Team stuff black for the last year and a half! Get in line!
Jake

well I bought a 0700 2 months ago and now the team one comes out. Killed me. I was just getting ready to send all my aluminum off and get it anodized red.Of course that is my fav color. So now I guess I am gonna sell mine and buy another. can't wait for a pic. bloody hyperdrive....lol

k7king, wait about a month and we can do all your stuff red. I don't know what we will charge or for how many pieces but stay tuned and I will keep you posted.

thanks
barry

cool....thanks.....thats the only thing that could make this thing faster. Making something red is like chroming it......makes it alot faster......

I've got a small beef to post here regarding the info about the 0700 from the "team" drivers.

A while back I asked the question here about a report I had heard that HD was coming out with a thicker chassis plate for the 0700.

Well, one of the "team" drivers posted here "oh no.. that's not going to happen".

Well, to my amazement, last week Jamie Tennies showed up at Trackside with a new thicker chassis plate for the 0700.

What's the straight story on this ????????


Thx

My 0700 is RED too....... From all the blood from last week! :p

:lol: Well rinse it off and we'll go at it again this Saturday! :thumbsup:

Teamgoodwrench, We changed the layup of the graphite and that made it stronger. the thickness of the chassis is .098 but you have to figure the tolerance which is Plus or minus 7% of the thickness.

hope this helps

barry

Hey barry when will that sse pro kit in red be avalible? Does the team eddition car come with the brass pivot balls front and rear?

Hyperdrive Man the red kits are available now. as for the pivot balls i don't know if barry is putting in th brass ones or the aluminum anodized, teflon ones.

Alright thanks for the info mike :thumbsup:

hyperdrive man, the red kits are available now. I am putting the teflon coated aluminum pivot balls front end and t-plate. I have not received the CRC "clicker" shocks yet, they were back ordered and should ship to me Friday or Monday. I also do not have a box cover or manual for the ssepro2 or the new 1\12 oval. When I get the cars back I sent to R\C Car Magazine I am going to end them to the new web master so he can take the pics for the web.

hope this answers everything.

thanks
barry

Hey can one of the hd team drivers let me know what the clicker shocks are desinged for and what the advantage of having them are
thanks...

New CRC "Clicker" shocks. These new externally adjustable shocks feature a 4-position click adjustment to vary the damping from soft to firm. Just a quick turn of the shock bottom and the damping changes in 4 gradual steps. Gone are the days of changing shock oil every run. Clicker's feature hard-coated threaded adjustable shock bodies for precision spring adjustments.

Basically its like changing the piston in a shock! I suggest you start in one of the middle positions. The position that will give you maxium adjustment toward the best amount of dampening for your track!!!!! The piston is one of the least used tuning item oval racers change. This shock will make it a very easy option to get the car faster!

Sorry to say that we strayed, but have come home again to Hyper Drive. Finished a 700 Team Kit on Wed. and first run of the night set a new track record with it! This is by far the best car on the market right now! Keep up the great work Barry.

When running the clicker shock you need to use a lighter oil like around 25-35wt.Ihave been running these shocks all season and love them.

Mike M that car was as close to perfect as I've ever seen. How many tenths of a second you figure that red anodizing is worth? L.O.L.Can't wait to see what you pull out of your hat next.

Barry,

I ordered a 700 team car from RC4 Less, talked to Bruce on thurs.He said you would direct ship to me on fri. Just wondering if you we're able to. Would like to get it ready for the nats at trackside.

Thanks, Curt Hartman