I am looking to find a price for a Lightning Brake Arm and Pad. I am not sure if these are sold separately or together; however I know the pads are sold as replacements.

Any help is appreciated.

Thanks,
Joe

JB
:thumbsup:

Joe, You have PM.

Right back at 'cha, Jeff.

JB

PM sent.

PM sent to you, Jeff.

JB

Right back at 'cha, Jeff.

JB

I have what i made for Larry Cross.Not sure if they are the same.If they did not change them it should be close. I will go Jeff's site to see if there is a pic there. No hope there no pics.I will take pic of mine.If you can use it i will send you one.It seems like no one has parts on websites anymore. Thats strange.

ED

First Quarter Racing
members.tripod.com/first25q/index.html

That basically the same thing Ed.

I have what i made for Larry Cross.Not sure if they are the same.If they did not change them it should be close. I will go Jeff's site to see if there is a pic there. No hope there no pics.I will take pic of mine.If you can use it i will send you one.It seems like no one has parts on websites anymore. Thats strange.

ED

First Quarter Racing
members.tripod.com/first25q/index.html

Does it use a shoulder bolt or a bushing on which to pivot?

Looks very nice; like Jeff said, very similar to the Lightning.

If you would like to send one, I would gladly accept one. :)

Joe

Does it use a shoulder bolt or a bushing on which to pivot?

Looks very nice; like Jeff said, very similar to the Lightning.

If you would like to send one, I would gladly accept one. :)

Joe


Joe i use a brass bushing.This way the brass and aluminum cannot gall up or bind.The bushing is about .015 thousants longer than the width of the arm.This way the when you tighten the bolt.The head of the bolt bottoms out againist the bushing. I will look to see if i have any bushings made.

Jeff a few years back the arm OAL was shorter.When i started making parts for Larry.He wanted the arm longer.The lenght is 3.940.Let me know what you have.

ED

Joe i use a brass bushing.This way the brass and aluminum cannot gall up or bind.The bushing is about .015 thousants longer than the width of the arm.This way the when you tighten the bolt.The head of the bolt bottoms out againist the bushing. I will look to see if i have any bushings made.

Jeff a few years back the arm OAL was shorter.When i started making parts for Larry.He wanted the arm longer.The lenght is 3.940.Let me know what you have.

ED

Ed and Jeff-

I would be curious about OAL as well. I received an arm from Butch Smith at our local track, but the OAL is very short (I'll have to measure it and get back to you). A longer arm would be better for my needs.

JB
:thumbsup:

Ed and Jeff-

I would be curious about OAL as well. I received an arm from Butch Smith at our local track, but the OAL is very short (I'll have to measure it and get back to you). A longer arm would be better for my needs.

JB
:thumbsup:

OK Joe let me know

ED:cool:

The new arms are 4.125 long.

The new arms are 4.125 long.

Jeff-

I sent an email to your address: jeff [at] jandmraceway.com

Thanks,
Joe

The new arms are 4.125 long.


Jeff tell me you did not use your tape measure:wave:

ED

email sent. Thanks Joe.:thumbsup:Jeff-

I sent an email to your address: jeff [at] jandmraceway.com

Thanks,
Joe

The new arms are 4.125 long.
Jeff post a pic or e-mail it to me.Just curious to see where they added the .200 to the OAL.

ED

Ed-

Sent an email with more questions about your brake arm and bushing.

Thanks,
Joe

Ed-

Sent an email with more questions about your brake arm and bushing.

Thanks,
Joe

Joe you should have an e-mail and a print for the bushing.Any Questions let me know.

ED

Back at 'cha, Ed.

Joe

Joe: You have PM.