XXX-Steve
03-19-2009, 03:14 PM
I'm selling a complete Duratrax Vendetta ST package with lots of spares and batteries. I'll try my best to list everything, but I have a lot and I might miss out on something. I'll probably come across a few more things while getting this altogether. I'll be sure to edit this thread when I find extras.
Why am I selling this? The mini circuit here is dead. I bought this when I was getting into RC again and didn't really know what I was going to do with it. I've only ran it on a couple of 1/10 scale tracks. I was hoping there would eventually be a mini class around here, but that hasn't happened. I've invested over a grand into this thing. Every part I bought was new. I don't want to break this up and would like to get rid of everything all at once. I will be listing everything as it is right now. This was recently setup to run indoor road course, but could obviously be converted back to off-road with everything that is included.
Duratrax Vendetta ST
(All upgrades listed are NOT on the stock version)
Assembled chassis
Foam tires
Duratrax aluminum heat sink (blue)
Graphite servo hold-down
Graphite battery hold-down
Graphite front brace
Aluminum bellcrank posts (blue)
Aluminum front hinge pin brace (blue)
Aluminum wheel hexes (blue)
Aluminum shocks (4)
Aluminum bushings (silver)
Aluminum upper arms (blue)
Duratrax swaybar kit
Duratrax rear turnbuckle rods
Duratrax STEEL CVDs (4)
Duratrax ball diff in front and rear
Electronics
Castle Creations Mamba 25 ESC
Futaba - R152JE radio system with extra servo
Duratrax AM Radio with servo
Duratrax stock receiver with ESC7500 Micro ESC (brake and reverse)
Venom LiPo balancer/charger (2 or 3 cell)
Motors
Duratrax VR3 380 motor (never ran)
GP Ammo 3900 brushless motor
Batteries
Duratrax 650 MAH NiMH pack
Duratrax 1200 MAH NiMH pack (w/Deans)
Venom 2 cell/20c 1800 MAH LiPo (w/Deans)
Venom 3 cell/20c 800 MAH LiPo (w/Deans)
Flightpower EvoLITE 2 cell/20c 1600 MAH LiPo (w/Deans) had an issue with this ballooning last time I ran it. Have not tried to charge it since. Not sure if it works or not, but it's back to regular size now.
Extra parts and accessories
Duratrax D-bar tires (hardly ran - have graphite pattern wheels)
Duratrax stock knobs (never ran)
6 Duratrax street treads with neon green wheels
Paragon Traction Action compound (almost full)
ST body (black with various graphics)
ST body (white with various graphics)
Neon green wing
Graphite driveshaft
Aluminum driveshaft
Aluminum front shock tower
Aluminum rear shock tower
Stock shocks and a few extras
Soft, medium, and hard springs
Lots of spacers
Two complete stock diff assemblies
Extra nuts, bolts, and small replacement parts
All kinds of stock plastic parts (some broken and fixable, some not)
Duratrax 1/18 mini truck hauler
New in package parts
(unopened)
Duratrax 6X10 bearing set
Duratrax upper front arms (2)
Duratrax front suspension arms (2)
Duratrax spur gear 45t
Duratrax shock o-ring Mini-Quake
Duratrax front hinge support
Duratrax pivot ball stud (6)
Duratrax adjustable caster clips (6)
Duratrax 2.6x6 screws
Duratrax hinge pin ball rear
Duratrax suspension arm mount upper front
Duratrax Vendetta ST chassis
I'm going to start out asking for $350.00 plus shipping. I realize that the mini stuff has dwindled in popularity and would prefer to sell this someone who is really into that class. I think they would understand better what they're getting and how much time and money I put into this. I don't think the casual RC basher would be willing to spend this much. However, I am interested in hearing offers and possible trade options.
I will be attaching a few pictures taken in the past of this truck (sorry about the quality - and the graphite pattern wing is not included since I snapped it the last time I raced). Later on, I will post a picture of everything together. Thanks for looking!
Why am I selling this? The mini circuit here is dead. I bought this when I was getting into RC again and didn't really know what I was going to do with it. I've only ran it on a couple of 1/10 scale tracks. I was hoping there would eventually be a mini class around here, but that hasn't happened. I've invested over a grand into this thing. Every part I bought was new. I don't want to break this up and would like to get rid of everything all at once. I will be listing everything as it is right now. This was recently setup to run indoor road course, but could obviously be converted back to off-road with everything that is included.
Duratrax Vendetta ST
(All upgrades listed are NOT on the stock version)
Assembled chassis
Foam tires
Duratrax aluminum heat sink (blue)
Graphite servo hold-down
Graphite battery hold-down
Graphite front brace
Aluminum bellcrank posts (blue)
Aluminum front hinge pin brace (blue)
Aluminum wheel hexes (blue)
Aluminum shocks (4)
Aluminum bushings (silver)
Aluminum upper arms (blue)
Duratrax swaybar kit
Duratrax rear turnbuckle rods
Duratrax STEEL CVDs (4)
Duratrax ball diff in front and rear
Electronics
Castle Creations Mamba 25 ESC
Futaba - R152JE radio system with extra servo
Duratrax AM Radio with servo
Duratrax stock receiver with ESC7500 Micro ESC (brake and reverse)
Venom LiPo balancer/charger (2 or 3 cell)
Motors
Duratrax VR3 380 motor (never ran)
GP Ammo 3900 brushless motor
Batteries
Duratrax 650 MAH NiMH pack
Duratrax 1200 MAH NiMH pack (w/Deans)
Venom 2 cell/20c 1800 MAH LiPo (w/Deans)
Venom 3 cell/20c 800 MAH LiPo (w/Deans)
Flightpower EvoLITE 2 cell/20c 1600 MAH LiPo (w/Deans) had an issue with this ballooning last time I ran it. Have not tried to charge it since. Not sure if it works or not, but it's back to regular size now.
Extra parts and accessories
Duratrax D-bar tires (hardly ran - have graphite pattern wheels)
Duratrax stock knobs (never ran)
6 Duratrax street treads with neon green wheels
Paragon Traction Action compound (almost full)
ST body (black with various graphics)
ST body (white with various graphics)
Neon green wing
Graphite driveshaft
Aluminum driveshaft
Aluminum front shock tower
Aluminum rear shock tower
Stock shocks and a few extras
Soft, medium, and hard springs
Lots of spacers
Two complete stock diff assemblies
Extra nuts, bolts, and small replacement parts
All kinds of stock plastic parts (some broken and fixable, some not)
Duratrax 1/18 mini truck hauler
New in package parts
(unopened)
Duratrax 6X10 bearing set
Duratrax upper front arms (2)
Duratrax front suspension arms (2)
Duratrax spur gear 45t
Duratrax shock o-ring Mini-Quake
Duratrax front hinge support
Duratrax pivot ball stud (6)
Duratrax adjustable caster clips (6)
Duratrax 2.6x6 screws
Duratrax hinge pin ball rear
Duratrax suspension arm mount upper front
Duratrax Vendetta ST chassis
I'm going to start out asking for $350.00 plus shipping. I realize that the mini stuff has dwindled in popularity and would prefer to sell this someone who is really into that class. I think they would understand better what they're getting and how much time and money I put into this. I don't think the casual RC basher would be willing to spend this much. However, I am interested in hearing offers and possible trade options.
I will be attaching a few pictures taken in the past of this truck (sorry about the quality - and the graphite pattern wing is not included since I snapped it the last time I raced). Later on, I will post a picture of everything together. Thanks for looking!