I have only run 21.5 lipo a few times and love it. I am using a 4 cell GTB and never had any problems. Now, when I start running 1c with 13.5 with the same speedo, what will I need to ensure I will have no problems with glitching. As in a receiver pack or do I need a voltage booster? Please dont be afraid to be specific such as manufacture and actual part #'s. I would like to be ready to race the first time out without the trial and error period of buying the wrong stuff or things I dont need.Thanks in advance.

I have been running mine with an LRP Sphere and a TQ booster with no problems so far. Last night we ran he same combo with a losi 2 cell, 190mah micro pack and had no problems either. The big thing either way is to make sure you don't turn on your speedo. Once that is on, you will run into low voltage cutoff protections built into the speedo, and that will shut you down due to the already low voltage of the 1c pack.

I'm running a tekin pro and a muchmore rx. pack with great results. our local track rules state you have to mount any soft cell rx. pack in the center of the car to try and protect it from being damaged so some people have decided to give the t.q. boost a try as well. so far both are working great.

from all my tests, a 4 min. run only draws 20 mah from the pack so recharging the pack in between rounds is a piece of cake.

good luck !!

Hmmm sounds easier than I thought...thanks guys