ammdrew
02-22-2009, 09:56 AM
Yes Back By popular demand the 3rd annual MMR Electric Challenge.
http://molzermoweryracing.com/images/racedates/mmrchallenge08.jpg
http://molzermoweryracing.com/images/racedates/mmrchallenge08entry.jpg
Here is some of the info from previouse challanges:
http://www.rctech.net/forum/minnesota-north-south-dakota-racing/207208-mmr-08-electric-challenge-april-19th-20th.html
http://www.rctech.net/forum/minnesota-north-south-dakota-racing/151899-mmr-07-electric-challenge-2.html
MMR VintageTrans-Am Spec Rules and Specifications
Body Specifications:
Body provided deck lid spoilers allowed (not wings). No additional skirts or raised/extended wings or air control surfaces allowed. Body must be trimmed
at body trim lines. Full rear bumper required.
Tire & Wheel Specifications:
HPI tire part #4793 front and #4797 rear, stock tire inserts provided with tire and any HPI Vintage wheels designed to fit.
26mm width fronts and 31mm width rear tires. 8-spoke Vintage wheels from #3805 through #3814, 5-spoke Vintage wheels from #3815 through #3822 and Vintage stock car
wheels from #3854 through #3860 are all legal wheels.
Tires must have visable tread.
Chassis Specification:
Four Wheel Drive touring car chassis only. Tires must fit within the body.
Motor Specifications:
Option 1: 27-turn ROAR stock motor: ROAR motor rules apply for 27 turn.
Option 2: 17.5 brushless motor: ROAR Motor Rules for 17.5
FDR Limit:
27t brushed/4-cell: 5.2 FDR
17.5 brushless/4-cell: 3.5 FDR
Battery Specifications:
4-cell NiCd or NiMh batteries
1-cell LiPo hard cased
Ride Height Specification:
Minimum ride height is 5mm.
Weight Specification:
Minimum 1450g Nimmh
Minimum 1350g Lipo
Race Specification:
5 minute Qualifiers Heats are run “heads up” with horn starts. Shuffling of start order for each round with slowest qualifier first and fastest qualifier last
9 Minute Mains: Starting grind should have cars aligned at angles along a side wall of the track.
Body List:
HPI part numbers:
17510 - 1970 Plymouth AAR 'Cuda
17519 - 1966 Ford Mustang GT
17508 - 1965 Ford Shelby GT-350
7494 - 1968 Chevrolet Camaro
Parma part numbers:
10143 - 1969 Z28 Camaro
10141 - 1970 Boss Mustang
10113 - 1970 'Cuda
Pegasus Hobbies part numbers:
PGH4001 - 1970 Camaro SS
PGH4002 - 1970 'Cuda
PGH4003 - 1970 Mustang
This will be a great introduction to the New Warehouse and Race Track.
Entry List (http://www.jlapracemanager.com/PC/Molzer/04_26_2009_Heats%20Listing.HTM)
http://molzermoweryracing.com/images/racedates/mmrchallenge08.jpg
http://molzermoweryracing.com/images/racedates/mmrchallenge08entry.jpg
Here is some of the info from previouse challanges:
http://www.rctech.net/forum/minnesota-north-south-dakota-racing/207208-mmr-08-electric-challenge-april-19th-20th.html
http://www.rctech.net/forum/minnesota-north-south-dakota-racing/151899-mmr-07-electric-challenge-2.html
MMR VintageTrans-Am Spec Rules and Specifications
Body Specifications:
Body provided deck lid spoilers allowed (not wings). No additional skirts or raised/extended wings or air control surfaces allowed. Body must be trimmed
at body trim lines. Full rear bumper required.
Tire & Wheel Specifications:
HPI tire part #4793 front and #4797 rear, stock tire inserts provided with tire and any HPI Vintage wheels designed to fit.
26mm width fronts and 31mm width rear tires. 8-spoke Vintage wheels from #3805 through #3814, 5-spoke Vintage wheels from #3815 through #3822 and Vintage stock car
wheels from #3854 through #3860 are all legal wheels.
Tires must have visable tread.
Chassis Specification:
Four Wheel Drive touring car chassis only. Tires must fit within the body.
Motor Specifications:
Option 1: 27-turn ROAR stock motor: ROAR motor rules apply for 27 turn.
Option 2: 17.5 brushless motor: ROAR Motor Rules for 17.5
FDR Limit:
27t brushed/4-cell: 5.2 FDR
17.5 brushless/4-cell: 3.5 FDR
Battery Specifications:
4-cell NiCd or NiMh batteries
1-cell LiPo hard cased
Ride Height Specification:
Minimum ride height is 5mm.
Weight Specification:
Minimum 1450g Nimmh
Minimum 1350g Lipo
Race Specification:
5 minute Qualifiers Heats are run “heads up” with horn starts. Shuffling of start order for each round with slowest qualifier first and fastest qualifier last
9 Minute Mains: Starting grind should have cars aligned at angles along a side wall of the track.
Body List:
HPI part numbers:
17510 - 1970 Plymouth AAR 'Cuda
17519 - 1966 Ford Mustang GT
17508 - 1965 Ford Shelby GT-350
7494 - 1968 Chevrolet Camaro
Parma part numbers:
10143 - 1969 Z28 Camaro
10141 - 1970 Boss Mustang
10113 - 1970 'Cuda
Pegasus Hobbies part numbers:
PGH4001 - 1970 Camaro SS
PGH4002 - 1970 'Cuda
PGH4003 - 1970 Mustang
This will be a great introduction to the New Warehouse and Race Track.
Entry List (http://www.jlapracemanager.com/PC/Molzer/04_26_2009_Heats%20Listing.HTM)