The 2009 Keystone Diecast CARnival event car will be a 2007 Shelby GT from Greenlight! The run quantity will be limited to 150. The cars will be available at the even and if any are available after the show we will offer them up to the rest of the diecast community.

The art has been done for this car and will soon be going to the printer for it's custom tampo work and then we will package them in their custom heat sealed CARnival packaging.

Below is a a glimpse of the final artwork and car mockup. Hope you enjoy!

http://i19.photobucket.com/albums/b175/centershock/CARnivalTeaser.jpg

http://i19.photobucket.com/albums/b175/centershock/2007ShelbyGTimpo.jpg

The car will actually be black with the silver art. Here is a photo from GLCollector that shows the actual car that we are starting with...

http://www.glcollector.com/2008/bjr4009.jpg

Oh, and one last thing! For those that have never seen a custom tampo printed onto a diecast car you may have a chance to see it up close and personal at this years CARnival!

The vendor that we chose to do our cars this year is located nearby (NJ) and said that they will most likely come to the show with a show specific model to print on site as a demonstration.

I am not sure if they will be selling those demo cars or handing them out at the show. I hope to clarify that close to event time. :thumbsup:

That is SWEET :thumbsup:

Definately have to try and get a hold of one!

Man I wish I could go. Had fun last year and this year looks to be better.

(stupid lay off from my job):cry:

I have to have one!

Lookin' SWEET!:thumbsup:

I have to have one!


Only one Pierre?:rolleyes:

Major Confusion :confused:

A Greenlight casting from a JLCollector photo ???

Major Confusion :confused:

A Greenlight casting from a JLCollector photo ???

Oops. My bad. I am so used to giving props to JLCollector. The same guy runs the site called GLCollector. That is where I pulled the pic from.

www.GLcollector.com

Hey Nick, care to elaborate on quantities or "special" cars? I remember last year there were a few event cars in "different" colors. I recall one event car last year was black(majority was yellow), will one car ths year be "green"?;)

Oops. My bad. I am so used to giving props to JLCollector. The same guy runs the site called GLCollector. That is where I pulled the pic from.

www.GLcollector.com

I figured that - Wyatt does such a great job with both sites:thumbsup:

Hey Nick, care to elaborate on quantities or "special" cars? I remember last year there were a few event cars in "different" colors. I recall one event car last year was black(majority was yellow), will one car ths year be "green"?;)


So far all we have on hand is the black ones. If I were to come up with some other versions of the car I am sure I could get them made as we did with the JL's last year.

Great looking choice Nick!!!

The 2009 Keystone Diecast CARnival event car will be a 2007 Shelby GT from Greenlight! The run quantity will be limited to 150. The cars will be available at the even and if any are available after the show we will offer them up to the rest of the diecast community.

The art has been done for this car and will soon be going to the printer for it's custom tampo work and then we will package them in their custom heat sealed CARnival packaging.

Below is a a glimpse of the final artwork and car mockup. Hope you enjoy!

http://i19.photobucket.com/albums/b175/centershock/CARnivalTeaser.jpg

http://i19.photobucket.com/albums/b175/centershock/2007ShelbyGTimpo.jpg

The car will actually be black with the silver art. Here is a photo from GLCollector that shows the actual car that we are starting with...

http://www.glcollector.com/2008/bjr4009.jpg

Oh, and one last thing! For those that have never seen a custom tampo printed onto a diecast car you may have a chance to see it up close and personal at this years CARnival!

The vendor that we chose to do our cars this year is located nearby (NJ) and said that they will most likely come to the show with a show specific model to print on site as a demonstration.

I am not sure if they will be selling those demo cars or handing them out at the show. I hope to clarify that close to event time. :thumbsup:

That's a cool idea!:thumbsup:

That looks good,Nick. Thanks for sharing.

can i get some info for this event as i live in western PA and would like to atten, just not sure where and when this is happenig, any help would be greatly appreciated

can i get some info for this event as i live in western PA and would like to atten, just not sure where and when this is happenig, any help would be greatly appreciated

Look here! http://www.hobbytalk.com/bbs1/showthread.php?t=234341
If you have any questions, you can PM me

GREAT looking car Nick!:thumbsup:

I think Swifty is in heaven with the choice.:woohoo:

is this about 3 or 4 hours from Pittsburgh?

is this about 3 or 4 hours from Pittsburgh?

I live in the Pittsburgh area (about 3 miles from the Allegheny County Airport), and it took me a little over 4 hours to drive to Denver, PA last year. I drove the speed limit though.

Where do you live Tuch?

Thats going to be a good car for the guys that collect the S197 mustangs!

Stutz i live in the eastern suburbs of Pittsburgh near Monroeville

Stutz i live in the eastern suburbs of Pittsburgh near Monroeville


Tuch, you are very fortunate that the PA Turnpike entrance is in Monroeville. Denver, PA is a straight shot from Monroeville, PA.

Try to attend the Carnival.:wave:

just put in for time off work, taking thurs,fri,and mon off! Gonna need recovery time! Man, I am READY, c'mon April!

I got the e-mail on Friday saying the cars were done printing! They should be in hand by Tuesday! Can't wait to see the final product!

Here is the finished product (less the packaging that is almost complete.

http://i19.photobucket.com/albums/b175/centershock/CARnivalStang09.jpg

http://i19.photobucket.com/albums/b175/centershock/09StangCloseup.jpg

Nick, that's a sweeeeet car!