Butters16
02-11-2009, 09:28 PM
if you want no maintence on motor and battery , go brushless and lipo, otherwise the stock motors and 3300-4600 mah batteries would work great.
|
View Full Version : E-maxx forum Butters16 02-11-2009, 09:28 PM if you want no maintence on motor and battery , go brushless and lipo, otherwise the stock motors and 3300-4600 mah batteries would work great. Airbus 02-28-2009, 01:37 PM Actually I use 2 old 3300 race packs, and a couple of stock 27T motors in mine....the Venom mods I bought were junk.....I might see if I can take the useful pieces off the Venoms, and put them on the stock cans.....arms, bearings and such.... Airbus 03-07-2009, 09:37 PM how do you guys have your motors wired?......so each gets thee full 14.4 volts, or in series so each only gets 7.2?.....Mine seem to get REALLY hot if I run them in parallel.... guver 03-08-2009, 03:28 AM Most everyone uses them in parallel. If you are using 540 sized 27 turn motors then a series is a good option. Airbus 03-08-2009, 09:34 AM Most everyone uses them in parallel. If you are using 540 sized 27 turn motors then a series is a good option. Ok....all I've done is a couple slow runs through the living room, and they seemed to get really hot.....so I'll give them a try in series and see if that's better....The 27t motors is just something to fool with till I can get some proper motors for it.... general pedestr 11-04-2009, 10:57 PM my e-maxx (gen2) http://i2.photobucket.com/albums/y42/Trx1/newmaxxbody.jpg http://i2.photobucket.com/albums/y42/Trx1/chassis.jpg http://i2.photobucket.com/albums/y42/Trx1/backofbody.jpg RPM:arms,bumpers,skids integy:bulks radio shack: batts proline: body 2pazr 11-06-2009, 01:57 AM stock emaxx in need or esc any that will work.. twin motor 2 battery.. bad6 02-01-2010, 04:28 AM I have a Novak Hv 5.5 in my e-maxx and its very fast.Novak has them for 170$ its worth the money.I also run 2 2c lipos 40c in it.Its bad to the bone. iwh1952 11-09-2010, 08:27 PM I run a novak GTB and 1 5.5 turn ballistic for racing powered by 2-5000 mah batts. My only prob. is the slipper as I've read others have. I'm in the process of trying to have a new style emax input shaft built for the older tranny. We'll see. As far as the motor plate, I just tape off the extra motor hole and run it. iwh1952 11-09-2010, 08:32 PM The older emax eats up the friction pins so I'm trying to convert to slipper shoes used on the newer emax. rcbeagle 11-09-2010, 10:55 PM I run a novak GTB and 1 5.5 turn ballistic for racing powered by 2-5000 mah batts. My only prob. is the slipper as I've read others have. I'm in the process of trying to have a new style emax input shaft built for the older tranny. We'll see. As far as the motor plate, I just tape off the extra motor hole and run it. Hey goto Gorillamaxx they have a single motor mount for $39.00 rcbeagle 11-09-2010, 10:59 PM The older emax eats up the friction pins so I'm trying to convert to slipper shoes used on the newer emax. goto Kershew Designs they have heavy duty slippers for $8.99 iwh1952 11-10-2010, 08:28 PM Apparently this thread is dead. Promatchracer 11-10-2010, 08:32 PM Wade stop over on my thread and LMK what all you might want to do We used to have our Emaxxs pretty beefed up As far as the pegs I will check with my buddy on making delrin ones Also as far as the single motor mount it isn't needed at all it is mostly for looks LMK iwh1952 11-11-2010, 06:42 PM Hey goto Gorillamaxx they have a single motor mount for $39.00 Thanks for the info rcbeagle, am in contact w/kershaw, this might work. I did't want to spend a ton of money to keep running.:thumbsup: bashslash 11-30-2010, 04:19 PM hey guys i just got my first emaxx its an older one with a 2 speed trans. This truck is alot of fun i was wondering what upgrades you guys did to yours to make them stronger and what the weak spots are that i should be watching and upgrading so far im putting the newer esc thats water proof from traxxas in it and i bolted on a set of talons let me know what you guys are doing and if you up graded something and wish you didnt. thanks vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.
|