does anyone know of a zero degree rear hub carrier that will fit a b4

http://www.stormerhobbies.com/cgi-bin/searchpn.pl?dterm=hub+carriers&dterm3=&pn=&mterm=Racer%27s+Edge&oterm=&uterm=&sthumb=on&smode=0

Get them quick, they have already stopped making the ones for the T-4

http://www.stormerhobbies.com/cgi-bin/searchpn.pl?dterm=hub+carriers&dterm3=&pn=&mterm=Racer%27s+Edge&oterm=&uterm=&sthumb=on&smode=0

Get them quick, they have already stopped making the ones for the T-4

As has been discussed on Dirtoval.com, these don't change the amount of rear toe on a b4/t4 - the stock carriers are zero degree. The toe is in the hinge pin mounts.

The way to change the toe on the rear of the B4/T4 with the racers edge hubs is to use the 1.5 degree hubs on the opposite side so the right hub on the left the left on the right and finding a set of racers edge 1.5 rear hubs 'In Stock' somewhere is highly unlikely.

In short don't buy the 0 degree hubs thinking you'll take the toe in out of the rear. That's not the way they work.

I know you can find them on ebay easily (0, .5, 1.0, 1.5....) Yeah, when they say zero, they mean zero change from stock. When they say 1 degree, that means if you put the left one on the left side, and the right on the right, it ADDS 1 DEGREE on each side. Flip them left to right, and it takes away 1 degree. :thumbsup:

Thanks for setting me straight.:thumbsup:
Sorry I gave out wrong information. :rolleyes: