Well after an exciting 08 Windtunnel is working on a bunch of new products as you about imagine. I would like to thank eveyone for an outstanding 2008. Spring sales were better than ever in "08" with "09" looking even better.
In addition to adding the aluminum caster blocks for the WT Strut front end a number of new products are in the works as well as upgrading some of the current items.
Customers, hobby shops you make this happen & I would personally like to thank all of you for your support in "08" & into 2009. Keep an eye here for new product announcements because they will be coming quickly. Good luck to all the racers in 09

Rob @ Windtunnel Racing Products:woohoo:

I have had some questions in regard to the Babies and Big Baby springs in how they compare to the associated. They are in fact the same thing. Windtunnel has every spring for every need for 1/10th and 1/12th scale cars, front or rear. Another area where the Pro CS springs have been beyond popular is in the dirt cars. I ton of racers that do dirt racing have been ordering the Pro CS because they have been getting beat by them. Every spring for every need and then some. Dont forget. Windtunnel does OEM, dealers and distributors. This is another area where Windtunnel have become very popular. Keep Windtunnel in mind when you need to improve your cars performance. We also do drag tires as well for those of you doing drag cars


Rob @ Windtunnel

Thanks Rob :thumbsup:

As of today after doing ending year stuff a bunch of items have been moved to the used/close out section for a great price. Get them now while they last

Rob @ Windtunnel Racing Products

Closeout items have begun to move quickly this weekend. Get some great bargins while they last:dude:

The following Windtunnel Oval Racing Bodies are re-approved for ROAR racing thru 2009 and into 2010:

Oval Stock Car 1/10th:

WT2210 "HDX"
WT2212 "HSI"
WT2241 "HST"
WT2235 "MDD"
WT2222 "HDM"
WT2214 "HDD"
WT2242 "MDM"
WT2249 "XHS"

Oval Stock Car 1/12th:

WT2211 "HDXjr"
WT2038 "MDM12"

Oval Racing Trucks:

WT2259 "CST" Super Truck
WT2272 "FST" Super Truck

Special Thanks to Dawn Sanchez and the rest of the ROAR Racing Crew for their timely and professional service.

Rob

Farming, RC racing, RC sales, RC product development and DJing too??????????

LOL!!!!!!!!

It has been a long day and it is far from over:(. We just keep chugging along:wave:. The new year has been good so far:thumbsup:. I might see some sleep by morning somtime:freak:
Rob

Better pictures of the Windtunnel 1/10th and 1/12th scale Late Model Oval bodies have been updated and can be seen on our web site now. More detailing of the painted Lexan shells will come later.

http://www.windtunnelracingproducts.com/index.php?cPath=42_27_31

Picture of our new stick on Spring Chart coming soon. Purchase any Windtunnel Spring set and recieve the chart FREE:thumbsup: Chart has colors, rates and overal looks great for quick look to see what you have. Picture will be up here yet this evening as well as the website

Rob

Now in addition to the chart available online we are now offering the brand new printed, stick on Spring Chart. Get one FREE with any spring set purchase. Stick it to your tool box or where you need it. Chart has colors as well as rates of all springs produced by Windtunnel.

Hey Rob hows it gone? been a long time since we chatted. I had so much gone on I had to get out of racing for now but someday hope to be back in it. Good luck in 09 and go team windtunnel. Later Kevin

Good to hear from you Kevin. Hopefully we will see you back on the track soon.:wave:


Ordering. Dealers we are working day and night to get the site going for you to order off of. At this time we would appreciate it very much if you could order offline even though you will not see the discounts. They are done but we are doing some final work to make sure everything is working properly. Your always welcome to fax your order as well to 712-428-4679


Rob @ Windtunnel Racing Products

Windtunnel Tire Customers


Get your orders in now. As always with the Snowbirds and other big races coming up we really need you to place your orders asap. I dont want to see anyone come up short. The BEST available, the ONLY company that sells singles. Get them now or wish you had:)

Rob @ Windtunnel Racing Products

BSR glue on foam bumper is now listed in the MISC. section of our website. Link is below


http://www.windtunnelracingproducts.com/index.php?cPath=40_103_141

Rob @ Windtunnel

Rob,
My order arrived yesterday. From Sloan to Atlantic Canada in five business days through USPS is amazing! Thanks for the great service & I'll be getting in touch to order those spec tires with my next order. Also, do you have many ORT bodies in stock? Our new truck class is taking off really well & I need more. Again thanks to you & Lisa.

Andrew Phillips

Anytime. We do our best to keep things moving and delivered on time

NOW in stock!!!!!!!! The new LRP SPX Stock Spec speed control is now in stock, on the website & moving fast!!!!!! Get them now:woohoo:

Well guys, you wiped me out of the SPX speed controls. More are being ordered or have already been on order. These are a Hot, Hot item right now. If you wish to reserve some let us know asap. Small non refundable desposite and you will be saved one in the order that you make your deposit.:wave:

SPX speed controls have been added to the website. If you want to prepay you can sure order them at anytime. This will make sure that you are first in line. They will be shipped in the order that they are reserved


Thanks everyone

Rob @ Windtunnel

Hey guys, do you carry the round carbide cutters for the MaxMod truers?

Thanks, Mike.

We build and carry carbide cutter for all current machine. Ill check as soon as I get a chance to see if the maxmods are still in stock. Check the website though and as soon as I get a chance, Ill look as well and make sure they are in stock

Rob @ Windtunnel

We just checked and there is one left in stock Mike. Im double checking to make sure it is listed on the site right now. If not it will be in a short time

Rob @ Windtunnel

Hey Bill thanks for all the stickers got them today. I'll put them on and post some pics.

Later.

Thanks Rob, I'll keep checking the website.

Hey Bill thanks for all the stickers got them today. I'll put them on and post some pics.

Later.

Your welcome Batman. I predict that those new stickers are good for another tenth.

I won't be down racing tomorrow. We are taking Brittany back to the U of Iowa. Her Christmas break is over and it is back to the grind.

Good luck,:wave:

Thanks Bill, I ordered the tire cutter tonight.

Windtunnel "Pro" CS late model/sprint Package is now on the website and available for sale. These springs have taken the Dirt oval scene by storm. Package comes with 28 Pieces (4 springs of each rate).

Windtunnel Customers. Please update your shipping addresses or the address on the CC your using. It is a must that this be done to make sure your package arrives in time for you. It would speed things up and be greatly appreciated. The address being shipped to must be the same as the card holder as well. For your protection and ours if the codes do not match your order cannot ship. I hope everyone understands that this is for our protection and yours.:wave:

Thanks everyone

Rob @ Windtunnel

It has come to our attention that the Windtunnel 1/12th scale Firebird Dirt Oval Wedge body is a really good fit for the Losi Late Model. You may need to trim the front bumper on the Losi Chassis a little but other then that it looks like a very good fit. So, for you Losi drivers, here is a little variety for a body. Part #WT2007

http://www.windtunnelracingproducts.com/product_info.php?cPath=42_27_31&products_id=136

Foams are great TQed at the ole club race with 1.98 RR :thumbsup:

Back RF
2 white LF
white LR
2 white RR

Jake

:wave:see post above

Jake

I see you guy have 1/18th scale oval bodies. We are looking for more bodies to fit our Robitronic Scalpel. it is 4" wide and a wheelbase of 5 3/4"(150mm).
would any of your bodies fit this chassis,
thanks

I see you guy have 1/18th scale oval bodies. We are looking for more bodies to fit our Robitronic Scalpel. it is 4" wide and a wheelbase of 5 3/4"(150mm).
would any of your bodies fit this chassis,
thanks

The wheel base of all our 1/18th scale bodies is 5 3/4"

http://www.windtunnelracingproducts.com/index.php?cPath=42_27_174

We have the width at the front and rear listed for each 1/18th body. We plan on doing some updating on our website for these bodies in the near future, such as painted shells.

Hope that helps. If you have anymore questions just ask away.

thank you, this could make our car handle better.

This morning we updated all the measurements of our (6) 1/18th scale bodies. Wheel Base, Length, Width at the Front Wheels, and Width at the Rear Wheels. All measurements are in inches and mm.

http://www.windtunnelracingproducts.com/index.php?cPath=42_27_174

Also keep in mind (for you smaller scale racers) that our 1/12th scale bodies seem to be a good fit for the Losi Late Model.

Hyperdrive 3.1 solid lipo chassis is back in stock. (#HD7309) (Hot Item)

We have one Windtunnel HDXjr 1/12th scale oval body (#WT2211) left in stock at this time. We are making more now and they should be fully stocked by the middle of the week.

I did a little updating on the pictures for our 1/18th scale lexan bodies. Pictures of clear Lexan just didn't cut it, so I painted the shells for these bodies. I'll do more detailing later.

http://www.windtunnelracingproducts.com/index.php?cPath=42_27_174

Later,:wave:

Finally back in stock is the new LRP SPX speed control. Those of you who preordered or reserved them, yours will ship tomorrow.:woohoo:

Just finished looking at the racers edge car bag on your web site. Was just wondering, on the top of the case wear you would put the tools if there is a tool holder like the ones the trinity and team magic bags have, to put the allen wrenchs and so forth.
Thanks

Just finished looking at the racers edge car bag on your web site. Was just wondering, on the top of the case wear you would put the tools if there is a tool holder like the ones the trinity and team magic bags have, to put the allen wrenchs and so forth.
Thanks

The Racer's Edge bag has a large storage cavity at the top. You can partition this area yourself to make smaller storage areas. They are a nice large bag. I use one myself.

Thanks for the info.

Rob,
My order just landed. Thanks again for the great service! I'll let you know how we make out in our WindTunnel spec tired truck class tomorrow.

Thanks,
Andrew Phillips

look what i spotted on Eric Andersons new Hyperdive down at the Birds
http://rc50.com/modules.php?name=coppermine&file=displayimagepopup&pid=9821&fullsize=1

(barrel center spring)

look what i spotted on Eric Andersons new Hyperdive down at the Birds
http://rc50.com/modules.php?name=coppermine&file=displayimagepopup&pid=9821&fullsize=1

(barrel center spring)

There's more where that one came from :thumbsup:

http://www.windtunnelracingproducts.com/index.php?cPath=42_201

Fresh stock of carbide cutters are done including the all new wider version trim stick.

the barrel center spring was on a ton of cars..pete d had one on his so they all had to have one.

We knew there were a bunch of them going to the birds with the barrel springs. Awesome design and functional at the same time. Front, Center & sides are all available. A lot of time went into those little monsters

Rob

can you explain what the v-hive and barrel springs do that are diff.
Thanks Tom

The "Barrell" shaped springs are superior in every way and function compared to other springs. They work completely different from other springs. If you looking for the "EDGE" then the barrel shapes are the way to go. Front end, sides, or Center they will give you the advantage needed to go fast and win.:thumbsup:

I have listed a ton of items on the closeout pages. With the year winding down I would like to see this stuff move. Here is a chance to get one heck of a great deal on radios, chargers, brushless motors and etc.:thumbsup:
__________________
:woohoo: