Just bought my first tweak board from lefthander, and looking for some help / tips on setting up this board. Whats the best way of setting this up to get consistent readings? Thanks Dominic
http://i37.photobucket.com/albums/e91/dom3669/SCBD4SCA.jpg

It must be level or you won't get repeatable results. Another thing that you will always want to make sure is that your suspension doesn't have any binding in it. King pins need to move free and the tplate must be free too. Make sure you set the car on the scale and gently push down on the front near the servo and the rear above the center shock were it meets the top plate. This allows the suspension to settle in and give you accurate results.

What Ken said.

I have the same scales and they work great!:thumbsup:

Another thing to consider is labeling each scale LF,RF,LR,RR.
Also, making sure the vehicles wheels are centered on each scale.

And that the scale's are in the same position every time you setup the board. Mark the board with a sharpie to make sure they are positioned correctly.

Thanks every one for the help.