What do most use for body posts? Delrin, Aluminum, Etc.

As well as i notice some use a clamp for height adjusment or body stop.where can these be purchased or are them home made. Thanks

Good question, I also would like to know.

Good question, I also would like to know.

a buddy of mine makes his own. he uses delron and cuts it down enough to fit in the end of the frame on a wcm. he buys larger material and cuts it into collars. he found a shop that sells the material. no he doesn't make them for sale.

I made mine from 3/8" aluminum rod purchased at Home Depot and filed down the end to fit the square tubing on the WCM. After inserting it, then drill and tap for bumper channel mounts. Purchased the collars from McMaster.

Pro1's I've seen use a collar to mount to the frame rails, with something welded to the collar for posts.

You can also use foam blocks on the posts for body height adjustments as well.

Post mount drawback. If you have someone come across the hood, it can catch on the body post and do some damage to your body, and their under carrage.

David

They can be bought from Bob Knox @ www.knoxmotorsports.com he is a great guy to talk to.




JAMMIN :wave:

Paul, Your truely J and M Hobbies. Give me a call.:thumbsup:What do most use for body posts? Delrin, Aluminum, Etc.

As well as i notice some use a clamp for height adjusment or body stop.where can these be purchased or are them home made. Thanks

Made mine same as David, except I had some rubber tubeing from a fountain drink machine I cut to lenght and slid over the bar for body hight.
I have enough rod to make you some up if you want.Would be my pleasure let me know.
Jim D.