HappyGene
11-08-2008, 07:43 AM
Hi Guys,
Let's do email for all this. I'll be selling a lot the next few months. Thanks.
Here's an unopened, nearly immaculate, Volvo 850 TA02-FF with the TCS sticky.
For new collectors, this means that this car is:
- still in the shrink wrap;
- in this case, has a 3/4 inch tear in the box from being pushed against a child's car seat;
- of a yesteryear chassis type;
- front wheel drive;
- is moderately collectible, not extremely so;
- eligible for Tamiya events (if you want to break the shrink!)
The tear is not deep, but I have taken $25 off because of it.
For drivers:
- most drive and chassis parts are still available;
- most parts interchange with many other TA02/03 models;
- many hopups are still available with some shopping around;
- for long term wear resistance I recommend adding the motor heatsink, full bearings, front universals or cvd's and front bearing hub pivots. Assemble by only snugging the screws with teeny dabs of blue loctite.
This was kept in clean dry storage and does not have any odor or mold.
I want $160 USD for it via PayPal or USPS money order and shipping to where-ever in the world. For the 48 continuous states, that's about $13-20 shipping depending on method. It will come in an additional shipping box of some sort and surrounded by pith & peanuts.
It's easier for me using email, but I will always check the forum, as well.
** Also, how do I actually have the pics show up instead of attachment links? I looked through the TOS and didn't find that option and it didn't show up when adding the pics.
Thanks,
:) Gene
Let's do email for all this. I'll be selling a lot the next few months. Thanks.
Here's an unopened, nearly immaculate, Volvo 850 TA02-FF with the TCS sticky.
For new collectors, this means that this car is:
- still in the shrink wrap;
- in this case, has a 3/4 inch tear in the box from being pushed against a child's car seat;
- of a yesteryear chassis type;
- front wheel drive;
- is moderately collectible, not extremely so;
- eligible for Tamiya events (if you want to break the shrink!)
The tear is not deep, but I have taken $25 off because of it.
For drivers:
- most drive and chassis parts are still available;
- most parts interchange with many other TA02/03 models;
- many hopups are still available with some shopping around;
- for long term wear resistance I recommend adding the motor heatsink, full bearings, front universals or cvd's and front bearing hub pivots. Assemble by only snugging the screws with teeny dabs of blue loctite.
This was kept in clean dry storage and does not have any odor or mold.
I want $160 USD for it via PayPal or USPS money order and shipping to where-ever in the world. For the 48 continuous states, that's about $13-20 shipping depending on method. It will come in an additional shipping box of some sort and surrounded by pith & peanuts.
It's easier for me using email, but I will always check the forum, as well.
** Also, how do I actually have the pics show up instead of attachment links? I looked through the TOS and didn't find that option and it didn't show up when adding the pics.
Thanks,
:) Gene