cress29
09-29-2008, 10:26 PM
SOLD!!!!!I have a 12V DC Team Integy Indi 16x908 Climate Control Battery Charger. It is LIKE NEW and has been used very little. It comes in the original box with instructions. new it was $225 from horizon hobbies. any question please ask. below I have included some tech information on it . Thanks
FEATURES: Charges 1-4 cell Lithium Polymer and Lithium Ion and 1-10 cell all
types NiCd and NiMH batteries with 50-10,000mAh capacity
0.1A - 8.0A charge rate
Discharges from 0.1A - 20.0A with adjustable discharge cutoff
CC-CV charging (constant current-constant voltage) for LiPo batteries
2, 3 or 4 step charging
Standard linear charge, reflex and impulse charge setup also
available
Temperature probe monitors battery temperature
Break in motors at up to 10A average and 30A peak current
ON/OFF TRICKLE with adjustable TRICKLE charge current
Triple decimal digit voltage display, two decimal digit current
display
Ten user profile memory slots
Customized names and setups
Large Indigo Blue LCD graphics display
Four wire alligator clip charge leads
SPECS: Dimensions: 8x7x2" (203x178x51mm)
Input Voltage: 11.5-14.5V DC
Charge Current: NiCd/NiMH 0.1-8.0A 0.1A/step
Discharge Current: NiCd/NiMH 0.1-20.0A 0.1A/step
Discharge Cutoff Voltage: NiCd/NiMH 0.1-1.1V 0.1V step
Li Ion/LiPo 2.53-5V 0.1V step
Battery Cell: NiCd/NiMH 1-10 cell 1mV/cell step
Sound: Magnetic buzzer ON/OFF, 0.3 Min, 5 melodies
Control Panel: Membrane switch
Cycling: 1-10 times
Output Type: Wire cable
Charge Modes: NiCd/NiMH
Cooling System: 40x40mm DC fan x 3
Charge (10 memory slots)
Smart TRICKLE: NiCd/NiMH ON/OFF 0-500mA 50mA step or auto (5% of
charge current)
Discharge: Cycle (DD, D>C) NiCd/NiMH only
Motor Break-In Setting Voltage: 1.0-8.0V 0.1V/step
Run Time: 0-24 hours 1s/step
Motor Run Max-Peak-Current 30A
Motor Run Max-Avg-Current 10A
FEATURES: Charges 1-4 cell Lithium Polymer and Lithium Ion and 1-10 cell all
types NiCd and NiMH batteries with 50-10,000mAh capacity
0.1A - 8.0A charge rate
Discharges from 0.1A - 20.0A with adjustable discharge cutoff
CC-CV charging (constant current-constant voltage) for LiPo batteries
2, 3 or 4 step charging
Standard linear charge, reflex and impulse charge setup also
available
Temperature probe monitors battery temperature
Break in motors at up to 10A average and 30A peak current
ON/OFF TRICKLE with adjustable TRICKLE charge current
Triple decimal digit voltage display, two decimal digit current
display
Ten user profile memory slots
Customized names and setups
Large Indigo Blue LCD graphics display
Four wire alligator clip charge leads
SPECS: Dimensions: 8x7x2" (203x178x51mm)
Input Voltage: 11.5-14.5V DC
Charge Current: NiCd/NiMH 0.1-8.0A 0.1A/step
Discharge Current: NiCd/NiMH 0.1-20.0A 0.1A/step
Discharge Cutoff Voltage: NiCd/NiMH 0.1-1.1V 0.1V step
Li Ion/LiPo 2.53-5V 0.1V step
Battery Cell: NiCd/NiMH 1-10 cell 1mV/cell step
Sound: Magnetic buzzer ON/OFF, 0.3 Min, 5 melodies
Control Panel: Membrane switch
Cycling: 1-10 times
Output Type: Wire cable
Charge Modes: NiCd/NiMH
Cooling System: 40x40mm DC fan x 3
Charge (10 memory slots)
Smart TRICKLE: NiCd/NiMH ON/OFF 0-500mA 50mA step or auto (5% of
charge current)
Discharge: Cycle (DD, D>C) NiCd/NiMH only
Motor Break-In Setting Voltage: 1.0-8.0V 0.1V/step
Run Time: 0-24 hours 1s/step
Motor Run Max-Peak-Current 30A
Motor Run Max-Avg-Current 10A