Hi guys

I was wondering how to remove the dub from the rear window of our cars without scratching the window? Would like feed back on this.

Thank you

"T"

I took a Q-tip dipped in some orange cleaner and wiped a couple times. Then another q-tip with some iso alcohol to clean it off. This was for a 1/64 scale. If it's bigger, you could use a cotton ball or paper towel.

Easy-Off Oven cleaner in the BLUE can works great. I would recommend taking the car apart first (if possible) and then soaking the glass in a plastic bag for a couple of hours. Then simply wash it with a sponge and all of the tampos should come off.

And for the third option, high quality Q tip (cheap ones do not have enough cotten on them and tend to scratch with the stick) and Goo Be Gone. Takes a little time, but works like a champ and no need to dis-assymble (sp?) with this metheod.

I use this photo everytime for this example, but after I have converted this 1:24 pro stock into my own creation, I needed to add my name to the door glass. So out came the Goo-B- Gone and presto chango, room for my own name!

Good luck, they all three will work well.

Ward

http://i7.photobucket.com/albums/y255/WilsonRacePhotos/DSCN3590.jpg

THANK YALL so much! I will try alll of these.