Wheres your new fan guards Spike?

You would know I gave you 2. :) I post pics up of those later.

I dont remember that? You holding out on me? LOL

The Tekin system has been in development for quite a while. We have been working closely with them providing data from our races with all the other systems we have been using as we develop the class.
They have worked hard and done a TON of race condition testing with several vehicles to work out all the bugs.
The Tekin system will definitely be worth the wait. They have taken into consideration all our concerns and comments in their development.
I am looking forward to getting my systems from them soon.

Thanks!

Ok Here are the pics with the fan guards:

http://i210.photobucket.com/albums/bb170/spikeitaudi/09%20Kyosho%20SP2%20WC777/IMG_3140.jpg

http://i210.photobucket.com/albums/bb170/spikeitaudi/09%20Kyosho%20SP2%20WC777/IMG_3139.jpg

And the Final completed body:

http://i210.photobucket.com/albums/bb170/spikeitaudi/09%20Kyosho%20SP2%20WC777/IMG_3138.jpg

Well Doug finally got it all done, here are some pics of the finished project. Do you have a suggestion for starting point for gearing for where I run. I ended up with 2 SMC6028 to start with. Stormer had them for $85. I got a notification last night the Zippy 5000 packs are in stock at Hobby City too.

Looks good, I would try a 18 first and go from there.
Check your motor temps.

Clean looking conversion mberie. Nice job.

I just discovered the pinion gear that came with my Losi conversion kit is marked 15 but is actually a 14 tooth. I wanted to drop 1 tooth and when I didn't have to reset the mesh I counted the Losi pinion and discovered this. Interesting

Here is a new one to add to the list,
http://www.modelrectifier.com/search/product-view.asp?ID=10155
It even comes with ROAR approved batteries!

$599 RTR batteries Incuuded

I'm going to start ordering the parts for converting my Xray B8-TQ here's what's on my list:
Battery tray (http://www.impaktrc.com/product_info.php?cPath=238&products_id=2544)
Battery straps (http://www.impaktrc.com/product_info.php?cPath=238&products_id=2067)
Motor Mount RC Monster (http://www.rc-monster.com/proddetail.php?prod=rcmxraymount)
Tekin RX8 2050 motor combo (http://www.amainhobbies.com/product_info.php/manufacturers_id/276/products_id/36900/n/Tekin-RX8-Redline-T8-1-8th-Scale-Buggy-Brushless-ESC-Motor-Combo-2050kV)

Any suggestions? I've read in RC-Tech that a few folks are having problems with the rotor in the Tekin motors, is that an issue?

Tweak

I'm going to start ordering the parts for converting my Xray B8-TQ here's what's on my list:
Battery tray (http://www.impaktrc.com/product_info.php?cPath=238&products_id=2544)
Battery straps (http://www.impaktrc.com/product_info.php?cPath=238&products_id=2067)
Motor Mount RC Monster (http://www.rc-monster.com/proddetail.php?prod=rcmxraymount)
Tekin RX8 2050 motor combo (http://www.amainhobbies.com/product_info.php/manufacturers_id/276/products_id/36900/n/Tekin-RX8-Redline-T8-1-8th-Scale-Buggy-Brushless-ESC-Motor-Combo-2050kV)

Any suggestions? I've read in RC-Tech that a few folks are having problems with the rotor in the Tekin motors, is that an issue?

Tweak

Some have... But Tekin is right on it making sure the problem has been corrected.

iam thinking about getting one of these things iam a nitro guy what tracks can you run these.i heard boardman runs electric and i heard that there was a track in sarver pa that will run them does anyone know

iam thinking about getting one of these things iam a nitro guy what tracks can you run these.i heard boardman runs electric and i heard that there was a track in sarver pa that will run them does anyone know

Check the track listing on this site and other sites.

Check it out. Kyosho now has an Electric 1/8th buggy complete RTR with an Orion motor and ESC!
http://www.kyoshoamerica.com/cars/index.php?part_num=30875

Looks like a Losi ESC.... I'll stick with a sensored system :)

Doesn't that appear to be underpowered?

Terribly...
BUT..Do you notice that the manufactures are pushing the lower KV rated motors in an attempt to dictate the direction of the class?
That is not why I wanted to get into this... I wanted the POWER!!!! and the durability of the vehicles.

Was reading where lower kv with a 5S produces more power, cooler motors, and longer run time. Not sure if it's true, but I'd like to see what kind of run time I would get with a 1500

Most tracks are adapting ROAR rules which is 4s max.

most every one is considering 5s as the future of 1/8 electric........it is one of the only ways you can easily compete in the extended mains.......only time will tell.........my e-mbx5t runs 25 min on two 3300 5s packs with a mamba 2200 system.....

Most tracks are adapting ROAR rules which is 4s max.
The 4S rule is just as stupid as the 8 pound weight limit that they came up with.

Fortunately, ROAR eventually realized the 8 pound weight limit was stupid.

Unfortunately, ROAR hasn't realized the 4S voltage limit is stupid.

This class is really in just the infant stages. I am sure for the next couple of years we will see constant changes and refinements of the class structure and guidlines and rules.
Dan

Check Out Big Dirt On Hobby Talk, For A Race Track For 1/8 And 1/5 Scale Race Tracks. 750 Foot And A 500 Foot For Elctrics.
Warren, Ohio. Looking For 1/5 And 1/8 Racers. This Track Is Fast.
I Just Got A Assc. Red Bull Truck .28 Pro Motor Awsome. Would Like To Get A Bunch Of Racers With These Trucks. Nitro Easy Start.

Check Out Big Dirt On Hobby Talk, For A Race Track For 1/8 And 1/5 Scale Race Tracks. 750 Foot And A 500 Foot For Elctrics.
Warren, Ohio. Looking For 1/5 And 1/8 Racers. This Track Is Fast.
I Just Got A Assc. Red Bull Truck .28 Pro Motor Awsome. Would Like To Get A Bunch Of Racers With These Trucks. Nitro Easy Start.



I have to ask...............whats that have to do with this thread titled Electric 1/8th Scale?

every one fishes............lol

The 4S rule is just as stupid as the 8 pound weight limit that they came up with.

Fortunately, ROAR eventually realized the 8 pound weight limit was stupid.

Unfortunately, ROAR hasn't realized the 4S voltage limit is stupid.

This class is really in just the infant stages. I am sure for the next couple of years we will see constant changes and refinements of the class structure and guidlines and rules.
Dan

I couldn't agree more with these comments.:thumbsup:

I couldn't agree more with these comments.:thumbsup:
The problem is, meanwhile, everyone who gets into the class and runs under ROAR rules is buying motors and batteries based on a stupid rule.

People Have To Know About Race Tracks And Where They Are To Race On Them.
We Are The Only Track To Race 1/5 And 1/8 Scale Around That I Know Of And I Have Been Told The People Wanted It And So Did I, I Built The Track. Maybe I Will Just Send All The Hobby Stores Brochures Also.
We Run Any Kind Of Battery Any Weight Any Speed. We Run Ifmar Timed Laps. So Come Out With What Ever You Have And Race. No Classes At All. All Timed Laps With Handicaps. ((((( No Rules At ALL ))))) And This Is 1/8 Electric Info. But We Run All 1/8 And 1/5 Together.
Longview Euro Track. Big Dirt On Hobby Talk. If I Am Wrong Hank Please Contact Me.

The problem is, meanwhile, everyone who gets into the class and runs under ROAR rules is buying motors and batteries based on a stupid rule.

True.

anybody have a good setup for a losi smart diff?? i bougt just the center and after racin oneday with it my front tires are shot and i never had problems before. i dont really know much about it yet so some advice would be great thanks

anybody have a good setup for a losi smart diff?? i bougt just the center and after racin oneday with it my front tires are shot and i never had problems before. i dont really know much about it yet so some advice would be great thanks

Jared try askin here.

http://www.rctech.net/forum/nitro-off-road/273139-losi-smart-diff.html

They can help:thumbsup:

Here are some pics with my new Tekin 2050 system installed.


http://i150.photobucket.com/albums/s81/dlightcap0101/081809_18282.jpg
http://i150.photobucket.com/albums/s81/dlightcap0101/081809_18283.jpg
http://i150.photobucket.com/albums/s81/dlightcap0101/081809_18281.jpg

does anyone make a better fan for the tekin half the blades were broken off in the first heat race i used it. thanks That looks sweet!

does anyone make a better fan for the tekin half the blades were broken off in the first heat race i used it. thanks That looks sweet!

You shouldn't really need the fan on the Tekin.... I don't think mine has ever kicked on....

does anyone make a better fan for the tekin half the blades were broken off in the first heat race i used it. thanks That looks sweet!
I've run mine for an hours worth of practice time and no broken blades. One guy I practice with was down to two blades, so he replaced it with a Novak fan. We'll see if that lasts longer for him.

You shouldn't really need the fan on the Tekin.... I don't think mine has ever kicked on....

If you didn't need it, they would have left it off - parts left off never break or need service (a bit of wisdom from GM mogul Alfred P. Sloan).

After a 19 year layoff from racing I decided to get back into it. Wow, things changed! Lipo's, wow. Anyways, last week I purchased a Slash to get back into things on a budget but after practicing a few packs got the itch to go fast. Last night I broke down and bought the new Caster Fusion 748. I choose this because it comes with 2.4GHz radio, charger, ESC, and 1 pack. The charger appears to be a good charger, ESC I've read is average but will work. I got more packs so I can run 4s setup. I'm really curious if I can keep up with everybody on the track. I plan to run in Medina,OH in a few weeks if I can get setup.

Has anybody raced the 748 out of the box with 4s setup?

we will be racing them on sunday this weekend starting at 11. should be a good group

I Want To See The Track Please.

Oval Is Where I Am Going! Off Road Is Not Very Good. Most Will Bash At Home.

You shouldn't really need the fan on the Tekin.... I don't think mine has ever kicked on....

Cooler electronics last longer.... No matter how cool it runs a fan should at the very least be available.

A Tip : Trim the corners off the fan blades and they wont catch the cage when it bounces. Also use the double sticky gyro tape as it really cushions the esc and makes everything happier :)

I Want To See The Track Please.

The layout has changed, but you'll get the gist of it:

http://blog.handyracing.com/2009/07/30/midwest-offroad-racing-league-2009--stateline-race-action.aspx

never mind.

never mind.

What are you going to run on 22.2 volts?
What ever it is... hang on.......

What are you going to run on 22.2 volts?
What ever it is... hang on.......


May want the HPI Vorza Flux to hit 80MPH. LOL

Or do a back flip everytime you hit the throttle!!! LOL!!

I had an ofna chassis but I got an 8ight cheap so I decided to convert that
http://farm4.static.flickr.com/3493/3954095011_ba32e814f5.jpg

Check out the RC Product Designs EL8 conversion for the Losi 8.
www.rcproductdesigns.com

kind of a lot for a kit:confused:

kind of a lot for a kit:confused:
As is so often the case, you get what you pay for. Dan's products are excellent (speaking as an owner of such a product).