View Full Version : John Deere SX 75 engine question ,,, PLEASE HELP


jeff927
06-26-2008, 08:48 PM
Hi , I have a 1988 John deere SX75 w/ a Kawasaki 9 hp engine , it ran fine then it quit getting spark , it has fuel and great compression , but it would start and run a while and quit and not have any spark !!
I replaced the sparp plug , same symptoms , I replaced the coil , same stuff !! The only othe part I can see in the system s a little box called an igniter (that is totally buried , but the mower is in good shape)
What I am wonderinbg is if any one else has had no spark issues with the 9 hp Kaw?? Any sugestions , The igniter costs 63$ , but I see nothing else in the ignition system !! NOTE ,, I did isolate the ignition system on the engine and it acted just the same it would sometimes start and run a couple of minutes and die !!
Thank you in advance for any help on this subject !!
Jeff :confused:

phillipmc
06-26-2008, 10:31 PM
Most likely its the ignitor you are talking about failing when it gets hot. Only thing you can do is replace it.

30yearTech
06-26-2008, 11:06 PM
The igniter costs 63$ , but I see nothing else in the ignition system !! NOTE ,, I did isolate the ignition system on the engine and it acted just the same it would sometimes start and run a couple of minutes and die !!
Thank you in advance for any help on this subject !!
Jeff :confused:

You can use an after market ignition conversion kit to replace the "igniter" they run around $20.00.

http://www.jackssmallengines.com/searchdb_more_info.cfm?part_num=440465&format=site_search