Are Rotors Interchangeable Lrp Rotor Novak Can Or Vise-versa ?
If So Any Performance Difference?
Inductance Readings Would They Be Different From Roar Readings?
Any Comments About 13mm Tuner Rotors?


Comments

Thanks

Are Rotors Interchangeable Lrp Rotor Novak Can Or Vise-versa ?
If So Any Performance Difference?
Inductance Readings Would They Be Different From Roar Readings?
Any Comments About 13mm Tuner Rotors?


Comments

Thanks

FROM WHAT I FOUND OUT TODAY, A NOVAK ROTOR LOOKS LIKE IT WILL FIT IN AN LRP CAN. DIDN'T TRY IT, BUT IT LOOKS THAT WAY. YOU WOULD NEED TO USE THE REAR BEARING FROM THE NOVAK BUT THE FRONT BEARINGS ARE THE SAME INNER DIAMETER. A LRP ROTOR WILL NOT FIT INTO A NOVAK CAN WITHOUT SOME MAJOR MACHINE WORK BEING PERFORMED. AND IN MY OPINION ISN'T WORTH FOOLING WITH.

THE ROTORS THEMSELVES ARE DIFFERENT. LRP'S ROTOR STACK IS SHORTER, SO IN A NOVAK WOULD PROBABLY HAVE MORE RPM'S. THE NOVAK ROTOR WOULD MOST LIKELY HAVE MORE TORQUE OFF THE CORNERS IN AN LRP MOTOR BECAUSE OF THE LONGER STACK.

GEARING ON THE LRP IS MORE CRUCIAL. GOT TO FIND THAT PERFECT GEAR BECAUSE IT' NOT VERY FORGIVING. ALTHOUGH I THINK ONCE THAT GEAR IS FOUND IT WILL PERFORM VERY WELL. AND IT HAS ADJUSTABLE TIMING BUT AFTER TURNING IT ALL THE WAY UP IT WAS GETTING PRETTY WARM ON ME SO I SET IT BACK TO FACTORY SETTINGS.

NO NUMBERS TO REPORT YET BECAUSE THIS WAS POINTS WEEKEND AT THE LOCAL TRACK AND THERE WERE TONS OF PEOPLE PRACTICING.

OH YEAH, AS FAR AS OTHER MOTORS READING DIFFERENT AND YOUR LOCAL TRACK HAVING TROUBLE TECHING THEM ALL WITH ONE NUMBER, THE LRP I HAVE TECH'S IN AT 148. MY NOVAK TECH'S AT 152. SO THERE ISN'T ENOUGHT THERE TO EVEN ARGUE OVER.

ROTORS WERE TESTED ON BOTH AS WELL. BOTH HAD STRENGTHS OF 1300 BOTH POSITIVE AND NEGATIVE.

MORE TOMORROW !!

MARCEL