waynesr
04-17-2008, 04:00 PM
Includes
Servo-Airtronics 94357
Receiver-Novak Xxtra 75 Band
ESC-Keyence Zero Extreme 2002 (instructions included)
Motor-"BMI" Monster Base
Body is a Protoform Mazda (1-crack)
Niftech-Titanium drive shafts with "flat" pins. Aluminum outdrives front and rear
Aluminum CVD's and "Flat" Dogbone Pins, Aluminum drive shaft supports
Older purple dot tires all around
New In Package
Associated Factory Team TC3 Full Carbon Set(Chassis and all)
Associated TC4 4 Deg. Caster Blocks
Trinity .070 Yellow Congo Springs
Trinity .065 Purple Congo Springs
Losi Thrust Bearing Set
Associated VCS Rebuild Kit For Macro Shocks
BRP Hinge Pin Set
IRS Composite CVD Bones With Pin Cushions
Associated 4-40x11/32 Button Hesd Screws With Shoulders
Associated Steering Rack Set
Associated Transmission Shim Kit
Associated Front/Rear Arm Mounts Kit STD.
MIP Shiny CVD Bones
BRP Front And Rear Anti Roll Bars
Niftech Hard Coated Aluminum Outdrives
Niftech Micro Finish Notched Diff Rings
Associated Nylon Shock Rod End With Steel Pivot Ball
Associated Optional Front And Rear Arm Mounts
Associated 2 Deg. Front Block Carriers
Associated 4 Deg. Front Block Carriers
Associated Rear Shock Tower
Associated 3mm Button Head Motor Screws Uses 2mm or 5/64 Wrench
Niftech Micro Fine Adjustable Inner Diff Assembly With Locking Set Screw Feature And Hardened Sleeve Nut.
MIP Shiny CVD Bones
Associated Factory Team Rear A-Arms
Associated NTC3 Front/Rear Tranny Case
IRS Aluminum Serve/Transponder Mount
Associated Input Shaft Hardware Set
Associated Long And Short Outdrives
Associated Steering Servo Mount Set
Losi 3/32 Carbide Balls
RPM Extended Blue Front Bumper
Associated Steering Rack Set
Associated Steering Rack Hardware
Associated 4 DEG. Front Caster Blocks
Associated Factory Team Front A-Arms
Associated TC4 6 DEG. Caster Blocks
Associated Front Shock Tower
Associated Body Post
Associated Body Post
Niftech Complete CV Assembly. (Aluminum)
Used
Steering Rack
Associated Spring Kit
Optional Hing Pin Holders
Spur Gear
Associated 6 DEG Caster Blocks
Optional Top Plate
Losi XXXS Red Front Bumper
Associated One Way Diff
These are the Parma's 28mm tires
1pr.-Magenta Cut to 2.25 (run before)
2pr.-Cyan cut to 2.21 (never ran)
1pr-Double Blue (never run)
2pr-Indigo cut to 2.25 (never ran)
1pr-Plaid cut to 2.21 (glued and ran)
2pr-Purple cut to 2.21 (glued and ran)
1pr-Purple cut to 2.21 (never ran)
4pr-Cyan cut to 2.225 (run before)
2pr-Double Blue cut to 2.21(spoke rim) (older and been run)
Also A Huge Bag Of Used Spare Parts
Asking $300.00 Shipped SOLD!!!!!!!
Servo-Airtronics 94357
Receiver-Novak Xxtra 75 Band
ESC-Keyence Zero Extreme 2002 (instructions included)
Motor-"BMI" Monster Base
Body is a Protoform Mazda (1-crack)
Niftech-Titanium drive shafts with "flat" pins. Aluminum outdrives front and rear
Aluminum CVD's and "Flat" Dogbone Pins, Aluminum drive shaft supports
Older purple dot tires all around
New In Package
Associated Factory Team TC3 Full Carbon Set(Chassis and all)
Associated TC4 4 Deg. Caster Blocks
Trinity .070 Yellow Congo Springs
Trinity .065 Purple Congo Springs
Losi Thrust Bearing Set
Associated VCS Rebuild Kit For Macro Shocks
BRP Hinge Pin Set
IRS Composite CVD Bones With Pin Cushions
Associated 4-40x11/32 Button Hesd Screws With Shoulders
Associated Steering Rack Set
Associated Transmission Shim Kit
Associated Front/Rear Arm Mounts Kit STD.
MIP Shiny CVD Bones
BRP Front And Rear Anti Roll Bars
Niftech Hard Coated Aluminum Outdrives
Niftech Micro Finish Notched Diff Rings
Associated Nylon Shock Rod End With Steel Pivot Ball
Associated Optional Front And Rear Arm Mounts
Associated 2 Deg. Front Block Carriers
Associated 4 Deg. Front Block Carriers
Associated Rear Shock Tower
Associated 3mm Button Head Motor Screws Uses 2mm or 5/64 Wrench
Niftech Micro Fine Adjustable Inner Diff Assembly With Locking Set Screw Feature And Hardened Sleeve Nut.
MIP Shiny CVD Bones
Associated Factory Team Rear A-Arms
Associated NTC3 Front/Rear Tranny Case
IRS Aluminum Serve/Transponder Mount
Associated Input Shaft Hardware Set
Associated Long And Short Outdrives
Associated Steering Servo Mount Set
Losi 3/32 Carbide Balls
RPM Extended Blue Front Bumper
Associated Steering Rack Set
Associated Steering Rack Hardware
Associated 4 DEG. Front Caster Blocks
Associated Factory Team Front A-Arms
Associated TC4 6 DEG. Caster Blocks
Associated Front Shock Tower
Associated Body Post
Associated Body Post
Niftech Complete CV Assembly. (Aluminum)
Used
Steering Rack
Associated Spring Kit
Optional Hing Pin Holders
Spur Gear
Associated 6 DEG Caster Blocks
Optional Top Plate
Losi XXXS Red Front Bumper
Associated One Way Diff
These are the Parma's 28mm tires
1pr.-Magenta Cut to 2.25 (run before)
2pr.-Cyan cut to 2.21 (never ran)
1pr-Double Blue (never run)
2pr-Indigo cut to 2.25 (never ran)
1pr-Plaid cut to 2.21 (glued and ran)
2pr-Purple cut to 2.21 (glued and ran)
1pr-Purple cut to 2.21 (never ran)
4pr-Cyan cut to 2.225 (run before)
2pr-Double Blue cut to 2.21(spoke rim) (older and been run)
Also A Huge Bag Of Used Spare Parts
Asking $300.00 Shipped SOLD!!!!!!!