View Full Version : 1/10 GTP Bodies


t4mania
04-13-2008, 06:06 AM
Anybody still making GTP bodies for 1/10 scale. Used to race them on road and loved them.

squeeker138
04-14-2008, 07:08 PM
http://www.mcallisterracing.com/racing/page4.html

swtour
04-14-2008, 08:05 PM
I think ALL of Gary's bodies are 200mm or 190mm. The Old GTP's were the 235 mm's.

I believe Parma still makes a 1/10th WIDE (235mm) Open cockpit (TOJ Style) in .040 thickness for the on-road NITRO 1/10th cars. It would probably be a good fit on electric too.

IndyRC_Racer
04-15-2008, 11:44 AM
If you look you can still occasionally find unpainted Protoform 1/10 (wide) pan cars bodies out there. Here is a link on Stormer Hobbies that might help you (http://www.stormerhobbies.com/cgi-bin/searchpn.pl?dterm=gtp&dterm3=&pn=&mterm=&oterm=&uterm=&sthumb=on&smode=0). It appears that Mcallister may have some bodies that would fit a wide pan car on this page (http://www.mcallisterracing.com/racing/page10.html)

swtour
04-15-2008, 12:00 PM
Good call INDY - I forgot about these

http://www.mcallisterracing.com/racing/img114.gif from McAllister.

I use to run the Toyota YEARS ago.

t4mania
04-15-2008, 07:05 PM
Thanks for the research guys. Didn't know Mcallister did GTP bodies besides the Sebring. I'll be sure to check stormer too. Thanks again!

BullFrog
04-16-2008, 08:34 AM
I have some old but new never painted Bolink Nissan GTP-Toj even a Porsche 962- and a red but not mounted Ferrari GT all wide.
Bill

squeeker138
06-03-2008, 05:08 PM
I saw this and thought that I'd post it so that you could see it too. https://www.ssl-stormerhobbies.com/cgi-bin/seekpart.pl?src=cs&pn=PTI920001