Anyone have an setup sheets yet?

Might want to try this:
http://www.hobbytalk.com/bbs1/showthread.php?t=207514

thanks

is the car available yet?

Anyone have an setup sheets yet?

Set up sheets are near completion. They are going to be basic assembly set ups as far as setb up tips go Steve and myself have been testing and tunning with the car and seem to have a pretty good idea what works. if i can help in anyway let me know. Matt

Set up sheets are near completion. They are going to be basic assembly set ups as far as setb up tips go Steve and myself have been testing and tunning with the car and seem to have a pretty good idea what works. if i can help in anyway let me know. Matt

After Frank not being truthful about sending me setup sheets that he promised to send months ago, I sold the car.

As forever buy another CRC product again, it will never happen. I don't like being lied too.

CRC never give me the customer support. CRC is Crap in my book

If anyone that wants the full story, PM me and I will be then willing to prove it.

Rick,

You were never lied too. You asked for an instruction manual. The car you had was a pre-production version that was pre-built here at the factory by experience RC racers. Being pre-assembled, there was no instruction manual included in the kit. I explained this in one of our phone calls.

I said we would get you one as soon as we had one to send. The manual is not complete as of yet. Carbon fiber shortages and the popularity of our Gen-X 10 has tied us up and prevented us from wrapping up the Battle Axe project. Part of the project is the printed manual which has not been completed yet.

In the meantime, we e-mailed some photos of the car being assembled, to demonstrate the assembly. We also e-mailed you some state of the art video instructions that you said looked great but you "wanted a paper manual to have at the track". We discussed this on the phone on more than one occassion.

In any case, I am sorry to hear that you are not satisfied. We did try to get you what you needed. I apologize that we fell short of your expectations. However, you were not lied to nor were we untruthful. CRC sells hundreds of cars and lucky for us, you are the exception rather than the rule. I wish you good racing in the future.


After Frank not being truthful about sending me setup sheets that he promised to send months ago, I sold the car.

As forever buy another CRC product again, it will never happen. I don't like being lied too.

CRC never give me the customer support. CRC is Crap in my book

If anyone that wants the full story, PM me and I will be then willing to prove it.

Rick,

You were never lied too. You asked for an instruction manual. The car you had was a pre-production version that was pre-built here at the factory by experience RC racers. Being pre-assembled, there was no instruction manual included in the kit. I explained this in one of our phone calls.

I said we would get you one as soon as we had one to send. The manual is not complete as of yet. Carbon fiber shortages and the popularity of our Gen-X 10 has tied us up and prevented us from wrapping up the Battle Axe project. Part of the project is the printed manual which has not been completed yet.

In the meantime, we e-mailed some photos of the car being assembled, to demonstrate the assembly. We also e-mailed you some state of the art video instructions that you said looked great but you "wanted a paper manual to have at the track". We discussed this on the phone on more than one occassion.

In any case, I am sorry to hear that you are not satisfied. We did try to get you what you needed. I apologize that we fell short of your expectations. However, you were not lied to nor were we untruthful. CRC sells hundreds of cars and lucky for us, you are the exception rather than the rule. I wish you good racing in the future.


How about the driver sheets that you were getting me from your drivers? Never sent them.

How about the bottom plate that you said was shipped and wasn't. A week later was told that you were manufacturing it and would be sent on Tuesday and took to the following Monday to arrive from Upstate NY to Long Island.

Want me to keep going???????? I still have all the emails.

Since you moved on to a new manufacturer there's no reason to keep going on and on about it.

Change of subject...Frank, what date will the New Year's Dash be this year?

CRC did the same thing when the RAZORII came out. I got my kit with no instructions a little while later they sent some instructions to me. they said that what they were going to do. I was lucky enough to get the pre released RazorII kit. they dont lie!!!!!!!!!

jason. i believe its the week before the billy leader race at walts.

u commin down anytime soon for a test and tune session?

Does CRC have a normal race night?

they currently do not have a oval race night but they do have onroad every thursday and a alternating saturday night/sunday show. check the website for up an to date schedule.

Change of subject...Frank, what date will the New Year's Dash be this year?

Thanks for the nice words guys.

The 13th Annual..... (wow 13 years.... damn) CRC Raceway New Year Dash will be held Saturday, December 27 2008. Look for more info on the site soon.

There are some new hotels around for those staying overnight. Certainly been great racing over the years and the past entry and champion list is a who's-who of oval racing.

Looking forward to see all the gang again for this years event.

Thanks,
Frank -

CRC Raceway and Hobby and Team CRC
www.crcraceway.com (http://www.crcraceway.com) www.teamcrc.com (http://www.teamcrc.com)

Any days the track will be available for oval practice? If you've seen me drive you'd know why. Like to get some time in before the Dash

Any days the track will be available for oval practice? If you've seen me drive you'd know why. Like to get some time in before the Dash

didnt u know that practice is overated and a pro like yourself shouldnt need any. just put the car on the track and go. :thumbsup:

LOL... Ahhh but a pro "hack" like me needs all the track time I can get. You must have me mistaken for someone with talent :thumbsup:

LOL... Ahhh but a pro "hack" like me needs all the track time I can get. You must have me mistaken for someone with talent :thumbsup:


gee, i thought u said u had it? boy i musta been wrong:rolleyes:

racin tomorrow?

Yep, I'll be there

When's the new shocks comming?

those should be available shortly.

Fireball, you should be asking Mr. Pemberton for something else and let me know how it works on that car.

Walter

[ QUOTE=lidebt2;2561020]After Frank not being truthful about sending me setup sheets that he promised to send months ago, I sold the car.

As forever buy another CRC product again, it will never happen. I don't like being lied too.

CRC never give me the customer support. CRC is Crap in my book

If anyone that wants the full story, PM me and I will be then willing to prove it.[/QUOTE]

someone is alittle hasty...if a set up sheet it why you feel you need to crap on CRC i would have to Question your abilltiy to set up any rc car. we currently have quit a few racers running the car and none of us have a set up sheet or for that fact need one being that not one of us are running the same setup. in the perfect world we would by a car that out of the box is a track record holder. every car you buy and every set up you read about changes once you turn your transmitter on. may i suggest going to radio shack and try one of there ready to run rc toys.:wave:

my crc car dont suck and i am "very happy" with it.:)

may i suggest going to radio shack and try one of there ready to run rc toys.:wave:

No, I'll leave that to you to buy your cars there.

Bye

Hey the CRC guys might not be perfect but none of us are. I also didnt get a manual because of preproduction but I know 2+2=4
My wife bought me the battle axe in june for my bday (june 14th) and when she found out that it would not be here until the 21st. She contacted them and instead of telling her she had to wait. They sent it to me and I recieved it by the 7th of june before they sent out the rest. I no longer have the car because I Needed the money and it was a little advanced for someone like me but boy do i wish i still had it now with what I now know. In the future I would buy from again just because they treated my wife who knows nothing about rc with alot of respect. As a recently disable vet I appreciate companys like CRC because i didnt have them when i was overseas for years. Big thanks to CRC hope to run you cars again soon

hi i got a crc battle axe and i love it just need to find more speed and bet other cars out there .just need some set up sheets to help me.mybe get some better tire on the car to and motor

I am sure that if the racers requested a warm up race Frank would make it happen. with the quick click track it can be changed in minutes. as for Mr. Slander, let it go as it was posted you moved on and should be over the crap. I have been with Frank for many years. and he has done nothing but great things for me. If it wern't for Frank and some good friends I would not be racing. so thank you Frank and the staff at CRC for your support and help that you always have given me in the past and and hope we can move forword. :thumbsup:

my crc car dont suck and i am "very happy" with it.:)

no woodsy its not the car...........ya freakin ding dong!!!!! its you Mr. no practice....

hi i got a crc battle axe and i love it just need to find more speed and bet other cars out there .just need some set up sheets to help me.mybe get some better tire on the car to and motor

if i can help you in anyway with my set up findings. call CRC and ask Brian for my phone number. tell him your looking for Matt.

no woodsy its not the car...........ya freakin ding dong!!!!! its you Mr. no practice....

:wave:didnt u know that practice is over rated?

On the center shock are most of the drivers using touring car springs or something else??

Wait, No practice and he still nails 73 laps? WTF


Ok, thats it... no practice, unload and let er eat....


I think Woodsy is on to something here...

Wait, No practice and he still nails 73 laps? WTF


Ok, thats it... no practice, unload and let er eat....


I think Woodsy is on to something here...

:thumbsup: yep

Naaa, can't be you, car just has to be that good.... :thumbsup:

On the center shock are most of the drivers using touring car springs or something else??


i/m using what came with my car. its either a 30 or 35lb spring.

Naaa, can't be you, car just has to be that good.... :thumbsup:

i would disagree with u at first but i think its the other way around now.

car origially bad driver good and now car good driver out to lunch.

speaking of lunch whats for lunch?

speaking of lunch whats for lunch?



Either Jamie or Lyssa, I haven't decided yet ;)

Either Jamie or Lyssa, I haven't decided yet ;)

nice:thumbsup:

On the center shock are most of the drivers using touring car springs or something else??

right now i am using associated short springs. with a preload spring on the shaft inside. again a short 40 associated spring. stops me from being ridged.

Wow.... You don't like to be ridged? that explains alot lol

Wow.... You don't like to be ridged? that explains alot lol


OH BOY:rolleyes:

Wow.... You don't like to be ridged? that explains alot lol

guess i like that full motion feeling...:woohoo:

:freak:

guess i like that full motion feeling...:woohoo:

So many places I could take that but I'll let others imagination go with that one... :p

Anytime72 I used to run those things you sell but not anymore. If I had a car that had one of those tings I would run your product. Best out there.

Butters As for center spring I run a windtunnel v hive 15lb spring with a HPI shock. Seems to work fairly well.

Anybody try 5 or 10 degree castor blocks on the front.
Thanks,
Fireball

Woodsy, Levy, Roberts and yes - Pemberpile...sharpen your axes boys, it's time to cut carpet!!

Come on over for some fun on the 15th, I think we'll have a pretty good show for our neck of the woods.

http://www.teammaximus.com/Register.php:thumbsup: