Any special way to break in a brushless motor. My brushed motors I used to break in at 3 volts for 30 seconds and repeated 3 times as per Trinity. Hate to go out and run it all out and burn it.

theres nothing to break in. put it in and tear it up.

Break-in process for a brushless motor:
1 - Put it in the car/truck
2 - Connect wires
3 - Install pinion gear and set mesh
4 - Run it on the track for 3-5 years
5 - Repeat step 4

:jest:

Break-in process for a brushless motor:
1 - Put it in the car/truck
2 - Connect wires
3 - Install pinion gear and set mesh
4 - Run it on the track for 3-5 years
5 - Repeat step 4

:jest:
LOL Nice....:woohoo:

Thanks guys I get the picture.

Put in car or truck set gear mesh grip it and rip it

Break-in process for a brushless motor:
1 - Put it in the car/truck
2 - Connect wires
3 - Install pinion gear and set mesh
4 - Run it on the track for 3-5 years
5 - Repeat step 4

:jest:

You forgot the most important step.....
6-HAVE FUN!!

you forgot a really important part dont ever try to break in a bl motor if you free rev it you have a good chance of hurting the motor