Count me and Tim in for NP. Maybe Chris and somebody tell Marlin to get his ready too!

I'm in.

Marlin reads the forum...he'll know.

Will not make this race.Gotta work before I can play.See yall April 12.Have fun and be safe! Jim D.

do to chassis will not make it

Hoping to get some practice laps on the truck this weekend. The Spring championship race is coming up. Both Truck & Sportsman classes will be racing!

Sounds like you could use some PRO-tection!!!:wave:do to chassis will not make it

i should be there as well to make some laps on the new car, Jerry Evans told me he would be there as well...

AB

I will be there. Hopefully Tim will bring my car?

Marlin

hey tim(or anyone), in response to the debate over what paint works on the lexan bodies......


I have always used pactra on lexan bodies. This paint flexes enough to allow it to stay on the bodies. I read that some say you can use a laquer based paint from walmart(not enamel based) and that it works the same. So being that they come in larger cans can someone say for sure if this will work?

AB

Marlin, I know Tim has your new brakes installed, but not having your radio I doubt they are adjusted.

I have adjusted mine to two different styles of engine, not a big-time consuming deal to do.

Well I did end up using Pactra. Waiting on the numbers and a Big O Pro1 sticker for the hood! Numbers will be ready tomorrow. :wave:hey tim(or anyone), in response to the debate over what paint works on the lexan bodies......


I have always used pactra on lexan bodies. This paint flexes enough to allow it to stay on the bodies. I read that some say you can use a laquer based paint from walmart(not enamel based) and that it works the same. So being that they come in larger cans can someone say for sure if this will work?

AB

I should be able to make it saturday. The damage to my racecar was much more extensive than I thought after a big crash in the sportsman B-main @ Easley. However, my WCM chassis is still straight as an arrow after being almost knocked over the fence!!!

It's amazing how big of a hit these cars can take sometimes. Then again, somtimes a small bump can take you out of competition!!!

whish mine had been a small bump 4 feet in the air probly about 30mph for 15 feet upside down the cage slammed the top of pit road wall like the old wrestling back breaker move because thats exactly what it done

hey tim(or anyone), in response to the debate over what paint works on the lexan bodies......


I have always used pactra on lexan bodies. This paint flexes enough to allow it to stay on the bodies. I read that some say you can use a laquer based paint from walmart(not enamel based) and that it works the same. So being that they come in larger cans can someone say for sure if this will work?

AB

The key to laquer is not to apply it to thick or wet as it does etch itself into the lexan. To heavy a coat will make the lexan brittle. If you look at the label, Pactra is Laquer based paint.

Thanks guys.....

anyone have a 15th gear for sale?

I'll check to see what I have but if you go by Motion Industries you can pick one up there... about $6.00. They have belts also.Thanks guys.....

anyone have a 15th gear for sale?

You guys better watchout for this cat!:thumbsup: Good Luck Alan.Thanks guys.....

anyone have a 15th gear for sale?

Ahh he's old news for us. We'll have him covered...if not Will can bump him on the run...LOLYou guys better watchout for this cat!:thumbsup: Good Luck Alan.

Alan done a great job at Easley:thumbsup:. He finished thrid with only the left rear wheel pulling. The set screw came loose about forty laps to go. Needless to say he will need a new Left rear tire. LOL
Ahh he's old news for us. We'll have him covered...if not Will can bump him on the run...LOL

Yeah I think everybody wround here knows Alan.

really? lol....

I thought I was gone long enough to be forgotten:) It's been about 5 years I think now.....

Scott, did I see you @ a offroad race at a track called the snakepit?

Nope, I think the only time we have been at the same track is over at MadMax, you were tuning a 1/8th buggy for some guy over there. I just have heard your name around and seen you on the OCM stuff.

I tried the off-road stuff again( I got my first taste of R/C with a Kyosho Ultima, man am I OLD ) for a couple of months and just cannot get the hang of getting any of my wheels off the track. I have spent too much time keeping them all on the ground that flying a car is just un-natural.

Nope, I think the only time we have been at the same track is over at MadMax, you were tuning a 1/8th buggy for some guy over there. I just have heard your name around and seen you on the OCM stuff.

I tried the off-road stuff again( I got my first taste of R/C with a Kyosho Ultima, man am I OLD ) for a couple of months and just cannot get the hang of getting any of my wheels off the track. I have spent too much time keeping them all on the ground that flying a car is just un-natural.

Yep...I was looking for some jumps but none in easley:)

count me and ronnie in fof #97 #20 alabama gang

I' ve tried everything but a screaming fit to get out of work sat.The boss aint buying it.
You guy's be safe and have a great day! Jim D.

looks like "THE SHOW" wont be there but will be in a few yall injoy those easy wins till then LOL

will, call me back this evening;)

slider you got pm

looks like "THE SHOW" wont be there but will be in a few yall injoy those easy wins till then LOL

Come on down Will, you can be the race director for the day:thumbsup:

Yep,

We'll let him setup and call the races!!!

Willyplankerheader. Can git-ur-Dun.

cant belive yall think i dont have a car to run i might show up and race cant never tell i am full of surpises i have been working on one all day

Working on one all day? What a beer we know better than that maybe a case:wave:

Joey

We know you are full of something, but suprises is not what we are thinking of. ;)

Lol!!!!!!!!!!!!!

Pics from the day

http://www.flickr.com/photos/harp4002/sets/72157604214067178/show/