I have a corally RDX and am running on a flat carpet oval.. I'm having trouble with on power push coming out of the turns. I'm running 19lb springs up front and 17lb in the rear, cyan tires up front and megenta in the rear. No roll bars. We are running stock 27t colbalt motors and Lipo batteries. Right now I'm running 52 laps and the 4cell stock pan cars are at 54 laps. I also have to let off the throttle way early to get into the corner or I'll endup way too wide. I was traction rolling at first but adjusted the springs on the shocks and got rid of that. Any help would be greatfully appreciated..

BadButch

I ran a TC3 last year and was succesful with plaids on both right side tires and purples on both left. You might be similar by putting the cyans on the right. Theory was the harder strips were on the right side keeping it from digging in and wanting to unload the left.

I have a corally RDX and am running on a flat carpet oval.. I'm having trouble with on power push coming out of the turns. I'm running 19lb springs up front and 17lb in the rear, cyan tires up front and megenta in the rear. No roll bars. We are running stock 27t colbalt motors and Lipo batteries. Right now I'm running 52 laps and the 4cell stock pan cars are at 54 laps. I also have to let off the throttle way early to get into the corner or I'll endup way too wide. I was traction rolling at first but adjusted the springs on the shocks and got rid of that. Any help would be greatfully appreciated..

BadButch

Give me a call and I'll hook ya up. Also check out these threads for info on Touring Oval:

Touring Oval Thread (http://www.hobbytalk.com/bbs1/showthread.php?t=128161)

HD Assassin Thread (http://www.hobbytalk.com/bbs1/showthread.php?t=199764)

704-754-6609
tony@precisionracingsystems.com

Get with Tony he will make a cardboard box with four wheel drive to turn right

LOL, P.S. Tony bump that up to 56 after last weekend