How do you make a homemade discharger. What is the trick to a home made discharger using light bulbs tryed it but dident do it right. If someone has a example or picture on how it is made it would really help.

Thanks taylor

what didnt you do right ?? you just need 10 bulbs in a row. and a wire on the pos. side and a wire on the neg. side.

Two brass rods. Solder the bottom of the bulbs (two lead colored contacts, center of the black area) to one rod. Then solder the other brass rod to the brass case about 1/4 inch below the glass. Add wires and aligator clips.

Im sure you can find a guide somewhere but it is pretty simple you just run a wire on both sides of the bulbs and then put 2 more wires for your plugs and then your done =).