The HD Assassin TC Conversion Kit* is a conversion kit for the Corally Assassin Touring Car (http://www.corallyusa.com/2005/ASSASSIN.htm). The Assassin has the option to run direct drive which is perfect for Oval Racing.

This is what you get with the kit:

1x chassis plate
1x nerf wing
1x tray bracket
1x 6-cell battery tray
1x bumper
2x rear arm brackets

HD Assassin TC Conversion Kit* $150.00 plus shipping.

Oval specific Front/Rear shock towers, top decks, and a rear graphite body mount will soon follow after the Birds.

Barry is also working on becoming a distributor for Corally (pretty much a done deal). This means we can get anything Corally related like an actual complete HD Assassin TC Oval kit, replacement and option parts, etc.

Hyperdrive Racing Website (http://www.hyperdriveracing.com/)
MSA Website (http://www.msaracing.com/)
c/o Barry Hill
3711 Moons Bend Rd.
Chapel Hill, TN 37034
Phone: (931) 364-7673
Fax: (931) 364-4636

Superior Hobbies Website (http://www.superiorhobbies.com/)
Team Corally Website (http://www.corally.com/)
c/o Micheal Bruce
1436 State Road 436 Suite 1040
Casselberry, FL 32707
PHONE: 407-834-9299

HD Assassin Version 1 (V1)
http://img242.imageshack.us/img242/690/corallyoval002lx5.jpg
http://img242.imageshack.us/img242/862/corallyoval004ws7.jpg
http://img242.imageshack.us/img242/2130/corallyoval003ul7.jpg
http://img134.imageshack.us/img134/6335/corallyoval005ut3.jpg


*Assassin rolling chassis, Purple/stainless screws, Radio Gear, motor, battery, top deck fan, tires, and rear body mount not included. Optional graphite LTO conversion only.

PRS will also be offering a spur gear and diff plate/timing pulley for the HD Assassin. These will allow us to use the RDX lightweight diff in the rear. The spur gear will be a 64 pitch 120 tooth so we can invert the rear bearing accentrics, lowering the diff for added rear grip. As soon as these are available I'll let ya'll know.

Stock front diff 1.1 oz.
Stock rear diff 1.4 oz.
RDX diff (front) .5 oz.
RDX diff (rear) .7 oz.

PRS Website (http://www.prsrc.com/)
c/o Tony Moffre
111 Algana Ct.
St. Peters, MO 63376
704-754-6609 cell

HD Assassin Version 1 (V1)
http://img251.imageshack.us/img251/8160/corallyoval0153hs.jpg
http://img148.imageshack.us/img148/7383/corallyoval0134wz.jpg
http://img251.imageshack.us/img251/8637/corallyoval0126un.jpg

Here are a few pics of the prototype towers for the HD Assassin. The production towers should be available very soon.

Here are a few features of the new towers:

Front upper shock mounts are lowered 1/4"
Rear upper shock mounts are lowered almost 1/2"
Added shock mounting positions front and rear
Added camber holes for aggressive RF or RR camber gain
3mm thick for added strength

During testing these towers have performed awesome. With the added camber holes we can fine tune camber gain on the RF for that aggressive entry feel. These towers combined with the RDX PHI suspension arms really give us more tuning options for shock mounting, camber gain, and roll center adjustments.

The chassis pic also shows the direct steering option that will be offered as well. This will remove the steering rack assembly and save a ton of weight and it gives the HD Assassin the pan car steering feel.

These are pics of the new car I'm building for the Touring Oval Class at the 2008 Snowbirds.

HD Assassin Version 2 (V2)
http://img206.imageshack.us/img206/2689/corallyoval026qm9.jpg
http://img266.imageshack.us/img266/4936/corallyoval027vv5.jpg

http://img147.imageshack.us/img147/9738/corallyoval029nk4.jpg

Here are pics of my new splash-o-paint from my boy Jody Miller!

Killer Koncepts Official Website (http://www.killerkoncepts.org/)
killerkoncepts1@aol.com

Thanks dude, the body rocks!

http://img90.imageshack.us/img90/6852/ortsidexi7.jpg
http://img145.imageshack.us/img145/9555/ortgrillta4.jpg
http://img145.imageshack.us/img145/8790/orttopqw7.jpg

sooooo damn nice! i just made a mess in my pants ooking at that thang!


tony what would it do on dirt?

sooooo damn nice! i just made a mess in my pants ooking at that thang!


tony what would it do on dirt?

Thinking about the CW Race in a few weeks, as the track is only an hour from me. With the geardown, direct drive, and 2wd option, makes me wonder...............

2wd Stock EDM Tranny
2wd Stock EDM Direct Drive
4wd Late Model (if offered)

Here is a link to the set-up sheet I made last year for the HD Assassin. I'll try and get it updated for the new camber holes, shock mounting holes, and PHI arm holes.

HD Assassin Set Up Sheet (http://img222.imageshack.us/img222/5013/hdassassinblanksheetovahb3.jpg)

No need to wonder--all sold out!!!!!!

No need to wonder--all sold out!!!!!!

Bummer............

Entries are up to 300 so we'll see.

might could see if they need to fill a class, they were going to fill certin class!!!

might could see if they need to fill a class, they were going to fill certin class!!!

Well it aint sold then is it. lol lol lol I'll check into there "Cheat'n Ole' Man"

They were going over there limit of 400 to fill classes if they needed 1 or 2 to fill!!!

I must say this is cool for TC, kudos to Tony and Barry.

-Monti-

I must say this is cool for TC, kudos to Tony and Barry.

-Monti-

Thanks for the props Monti.

Don't thank him--it his head get bigger--ha ha ha

Don't thank him--it his head get bigger--ha ha ha

Aint it past your bed time Flipper.

Tony, you need to brang that thing down here and try it on the new DO, I ran my XXXS today and boy it was a blast

Tony, you need to brang that thing down here and try it on the new DO, I ran my XXXS today and boy it was a blast

What did you run (stock, mod, 6-cell, Lipo, ETC)?
What body and tires?

13.5 Lipo, McAllister Hagerstown late model, BSR pink foams

13.5 Lipo, McAllister Hagerstown late model, BSR pink foams

3200 Carbon?
Cut/grooved single pinks?
Air Dahm on the side?
Grease on the tires?

Must spill the beans..................lol

3200 Carbon, no cuts in tires, 4x8 Dahm no tire prep

today was the first day I had it on the track and the first time I have ran any DO, got some work to do on setup

3200 Carbon, no cuts in tires, 4x8 Dahm no tire prep

Supposed to make the trip to Greeneville next week in prep for the Oval Masters. Might have to skip it and come play on some dirt!

I'll call ya later in the week.

How many late model did you have?

We havn't started racing yet, just running laps, Donnie still has some work to do, till we can race on it. Nov.15 is set for the first practice day. May start racing after that or might wait until first of year. I would say that 4WD late model will be the biggest class we have.

That car is beautiful Tony. Its too bad I have a TC3 man I'd spring for it in a minute!!

Not only is the car beautiful, but it drives awesome too! I've been doing a lot of testing along with Tony, and these chassis' have come a long way since the Snowbirds last year. I think the two biggest changes have been the short arm setup along with the new shock towers. The new camber locations on the shock towers allow the car to cut so much harder! It's amazing how much this car turns in the center! But, it also has an incredible amount of drive off of the corners!

I'd just like to say thanks to Tony for all of the help! He's done an awesome job with all of the different ideas and things to try. If you're going to run touring oval, you can't go wrong with the Hyperdrive Assassin!

Awesome car may have to try out the TC Oval thing

I have been asked the following question a few times:

Tony is that conversion for the rdx or the assassin

You can use the RDX (not RDX PHI) but you will need the following parts from the assassin:

COR79174 Rear Diff (http://www.corallyusa.com/istar.asp?a=6&id=COR79174!COR&csurl=%2Fistar%2Easp%3Fa%3D29%26) (RDX diff can be used when PRS parts are released)
COR79245 Rear Shock Tower (http://www.corallyusa.com/istar.asp?a=6&id=COR79245!COR&color=0&size=0&subsize=) (until new HD towers are released)
COR79200 Front Bulkhead (http://www.corallyusa.com/istar.asp?a=6&id=COR79200!COR&color=0&size=0&subsize=) (2x required)
COR79201 Rear Bulkhead (http://www.corallyusa.com/istar.asp?a=6&id=COR79201!COR&color=0&size=0&subsize=) (2x required)
COR79210 Motor Mount (http://www.corallyusa.com/istar.asp?a=6&id=COR79210!COR&color=0&size=0&subsize=)
COR79350 Top Deck (http://www.corallyusa.com/istar.asp?a=6&id=COR79350!COR&color=0&size=0&subsize=) (stock)
COR79352 Top Deck (http://www.corallyusa.com/istar.asp?a=6&id=COR79352!COR&color=0&size=0&subsize=) (3.2mm optional)
COR793137 Long Belt (http://www.corallyusa.com/istar.asp?a=6&id=COR79137!COR&color=0&size=0&subsize=) (direct drive)


You can use Assassin (long arm) (http://www.corallyusa.com/istar.asp?a=6&id=COR791024!COR&color=0&size=0&subsize=), RDX (short arm) (http://www.corallyusa.com/istar.asp?a=6&id=COR791074!COR&color=0&size=0&subsize=), or RDX PHI (short/front) (http://www.corallyusa.com/istar.asp?a=6&id=COR79080!COR&color=0&size=0&subsize=) RDX PHI (short/rear) (http://www.corallyusa.com/istar.asp?a=6&id=COR79090!COR&color=0&size=0&subsize=) arms. Keep in mind there are different flex ratings for each of the above. You can use soft arms outdoors (rubber tire, caps, dirt oval racing) and stiff arms on carpet (foam tire racing). Another excellent tuning option for the HD Assassin.

Corally has the following cars:

Assassin (http://www.corallyusa.com/2005/ASSASSIN.htm)
Assassin Mid Motor (http://www.corallyusa.com/2005/cars/AssassinMidMotorManual.pdf)(mid motor mount and top deck will not work)
RDX (http://www.corallyusa.com/2005/RDX.htm)(bulkheads, motor mounts, rear tower, and belts will not work)
RDX PHI (http://www.corallyusa.com/2005/PHI.htm)(bulkheads, suspension mounts, belts, shock towers, and diffs will not work)

Here is a list of the parts used for the CW rear body mount:

1004 Rear Body Mount (http://www.customworksrc.com/ProductDetail.jsp?LISTID=3150000-1098589297)
2224 Top Plate Block (http://www.customworksrc.com/ProductDetail.jsp?LISTID=3840000-1101156578)
1238 Tranny Brace (http://www.customworksrc.com/ProductDetail.jsp?LISTID=3210000-1098591112)

Until the HD Rear Body Mount Assembly is released follow the instructions below for making the rear body mount using CW hardware.

1. You take the Tranny Brace and dremel cut it in 2 pieces. Cut it down and sand the one side so it matches the other side. When finished it should look even from side to side and front to rear.

2. Assemble the body mount, tranny brace, and block.

3. Then place the assembly on the rear side of the shock tower, mark your holes and drill.

Refer to page 1 for detailed pics.

When the HD towers are released you will not need step 3.

hey! tony, what's with the rear axle hub's on your new car? is that a mod corally part?

They are from Specialized R/C but have been discontinued. It's a stock upright with the top cut-off and 2 holes drilled for a vertical ball stud.

good idea!

good idea!

You going to the Snowbirds? Or maybe the Oval Masters?

went back too take another look at the picture you posted of the rear of your new car, it was gone?

going to try, last year was at the hospital during the snowbirds. have family down there also. going too make a vacation of it!

went back too take another look at the picture you posted of the rear of your new car, it was gone?

Don't know what happened but all fixed now.

hey! your pictures back!! thanks for the help!!

Johnnyhacksaw.............YGPM

tornado you have pm!

Tony it is Dustin Malicoat, give me a call I would like to talk to ya about some of this stuff concerning the dirt oval side.

Tony, do you make any 32 pitch gears for us nitro dirt oval racers? If so I would be interested in talking with you. As of today the CW race is I think full. They posted on dirtoval.com that they were at the 60 heat limit but they are taking alternates. Come up if you can and check it out.

Tim McNutt

Hey Tim,

I'm pretty sure they only make 48 and 64 pitch. But Tony could answer for sure.

Tony it is Dustin Malicoat, give me a call I would like to talk to ya about some of this stuff concerning the dirt oval side.

317-508-5616

I'll give ya a ring later today.

Tony, do you make any 32 pitch gears for us nitro dirt oval racers? If so I would be interested in talking with you. As of today the CW race is I think full. They posted on dirtoval.com that they were at the 60 heat limit but they are taking alternates. Come up if you can and check it out.

Tim McNutt

Sorry Tim, but as Jack stated we only offer 48/64 pitch.

I did not read through the whole thread, but how much is the corrally touring car kit street price,(not the conversion) and where can they be bought.. What is the total price for the kit, and the conversion.. IE what would it cost me to get one, thanks

Hey Burbs,

You can purchase the kit from Corally. When I bought mine it was $300. I called and talked with Jeff Brown at Corally, and he hooked me up with the Master Assassin. The conversion kit can be purchased through Barry at Hyperdrive. This is what you get with the kit:

1x chassis plate
1x nerf wing
1x tray bracket
1x 6-cell battery tray
1x bumper
2x rear arm brackets

HD Assassin TC Conversion Kit* $150.00 plus shipping.

Oval specific Front/Rear shock towers, top decks, and a rear graphite body mount will soon follow after the Birds.

Barry is also working on becoming a distributor for Corally (pretty much a done deal). This means we can get anything Corally related like an actual complete HD Assassin TC Oval kit, replacement and option parts, etc.

Tony also posted this concerning the rear body mount:

Here is a list of the parts used for the CW rear body mount:

1004 Rear Body Mount
2224 Top Plate Block
1238 Tranny Brace

Until the HD Rear Body Mount Assembly is released follow the instructions below for making the rear body mount using CW hardware.

1. You take the Tranny Brace and dremel cut it in 2 pieces. Cut it down and sand the one side so it matches the other side. When finished it should look even from side to side and front to rear.

2. Assemble the body mount, tranny brace, and block.

3. Then place the assembly on the rear side of the shock tower, mark your holes and drill.

Refer to page 1 for detailed pics.

When the HD towers are released you will not need step 3.

These cars look really awesome, nice work!!

But for the simpler side of life when can I purchase what I see in the pics in one package?

These cars look really awesome, nice work!!

But for the simpler side of life when can I purchase what I see in the pics in one package?

To be 100% honests it will be some time before an HD Assassin kit is available. There are talks of machined bulkheads so you can purchase an RDX and go racing from there.

Right now your looking at about $400.00-$500.00 to get a roller. $300.00 for a new Assassin kit ($200.00 for a used car), $150.00 for the offset chassis kit, and about $40.00 for the rear body mount. This would give you the version 1 which is what TQ'd and Won the birds last year. My new car is a version 2 which includes updated arms, towers, and steering. This car has shown to be very promising during testing.

As more kit form info is available I'll post ASAP.