Host for this years US Openwheel Champs. All new facility, large pit areas, AC power inside, wide drivers stand, great atmosphere. Banked clay oval, long straights, tight corners, high bite track. What more can you ask for in a DO track? Contact, Steve Bess at (704)363-6494, or online at www.csraceway.com.
Kevin

Several coming down for the weekly race this next Sat (Nov 17th) looking for a good turnout. If your in NC or upstate SC, come see what all the fuss is about.
Kevin

New classes coming in '08. Brushless/Lipo Latemodel, and Brushless/Lipo Mod Sprintcar. Should be a blast. Stay tuned for more details, coming in the next week or so. Also, a 6 race series for all the classes, including these.
Kevin

Starting an rc club in our area. looking for the stuff to build a carpet track. Where do you buy the portable track?

Starting an rc club in our area. looking for the stuff to build a carpet track. Where do you buy the portable track?This is a Dirt Oval thread?? If you are in NC and looking for Carpet, got to the Tracks thread, and find TRD, It is carpet. In Salisbury, NC.

Looking to run the 4wd TC Latemodel class, anyone been running there with them?

If so what are the rules?

Hey Tony,
Here is the link to the rules at the C&S Web Site:
http://www.csraceway.com/csraceway/Files%20&%20Images/Rules.htm

The only updates I've been given from the C&S web page rules is the Lipo max is 5000.

The C&S Web site rules also reference the Open Wheel rules which are:

- Latemodel: Latemodel bodies may have openings for cylinder head, fuel tank access, glow plug, engine tuning, and exhaust outlets only. Maximum track width is 10". Maximum rear spoiler chord is 2"including any molded in portion. A 1/4" wicker is allowed on top of spoiler in addition to the 2". A left side dam will be allowed with the following dimensions: Max length 14", max height is 2.5" above deck plus a 1/2" bend at top. Side dam leading edge must be at least 3" behind center of front axle with wheels straight. Leading Edge must be perpendicular or angle back (can not angle forward). Also side dam must be mounted and braced securely at a 90 degree angle with at least 2 rigid braces. No flopping side dams allowed. A right side spoiler cap or side dam is allowed and can be no longer than 2" forward of spoiler base and no taller than top of spoiler. No additional wings, spoilers, wickers, flaps, vents, doohickeys etc. can be added to body other than what is specifically mentioned above. The body may not be altered in anyway from its stock configuration ie: shortened, lengthened, narrowed etc. Reasonable modification may be permitted to allow for cylinder head cooling only.

BT