No need to tape batteries in, ever again! New battery tray for the KSG Gen 2 has clamping system to secure your li-po batteries. Also has a larger patch for brushless speed control. If you really love that tape thing, you can use tape and place your batteries toward the inboard or outboard direction to suit your needs.

Now taking orders, $35.00 each (batteries not included) plus shipping. BigBoyToysRandy@yahoo.com

Sweet looking tray!

Now that’s just what is needed with the KSG 6 cell tray the speedo hangs off to much
Bring me one to the track on Friday night

I may even be willing to move my ESC to the LH side with one of these...

if/when I get a JOB - I know what I'm going to be getting...LOL

Will these fit the Gen 1? If not, will you either be making one that will or know what has to be done to make it fit? Thanks

Will these fit the Gen 1? If not, will you either be making one that will or know what has to be done to make it fit? Thanks
It should by the looks of it, if not nothing a dremel tool and a drill and drill bit's won't take care of :thumbsup:

I would also like to know if it will fit a gen 1. It's a great looking part hope it can at least be converted to gen 1.

BigBoy makes some nice stuff! :thumbsup:

$35?? This sounds a little more reasonable?? Still have to drill, etc.

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LX2778&P=SM

...the battery cups work too, but some people like things just a little cleaner and nicer looking. The carbon fiber trays from Randy are as sweet as everything he makes.

The Gen1 tray is a lot wider than the Gen2. This tray won't work. Randy @ Big Boys Toys would have to make one specifically for the Gen1.

His email is at the top. Wouldn't hurt to ask!

$35?? This sounds a little more reasonable?? Still have to drill, etc.

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LX2778&P=SM

Only problem with this is you would have no batt adjustment if needed.

anyone emailed Randy?

...didn't email him, but he was at my race today...running on the "Encino Velodrome"...

"I'll be working on one for the Gen 1 this week. -Randy"

Good news, guys!

a123 batteries do not explode or burn. these are the batteris that should be run. that way the guy that does not know whats up can not burn the track down.

li-po man

Any word on the Gen I try yet?

Randy said the drawing was coming along and he hoped to have them very soon. Will get an update from him this weekend.

Here is the thread about the Gen 2 Tray.

Hey Randy been busy this week, but I got my batt tray and top plate last Sat. Man that tray is the trick! Thanks for making such a great product. The Orion 3200 fits like a glove.

max-amps has plastic covers for li-pos now. alot better battery. the wires are soldered on! will not come out like orion battery plug in wires. wait till you have one come out during a race. better tape them in. nice bats but the plug in wires suck.

No need to tape batteries in, ever again! New battery tray for the KSG Gen 2 has clamping system to secure your li-po batteries. Also has a larger patch for brushless speed control. If you really love that tape thing, you can use tape and place your batteries toward the inboard or outboard direction to suit your needs.

Now taking orders, $35.00 each (batteries not included) plus shipping. BigBoyToysRandy@yahoo.com

YOU HAVE A EMAIL

I wanted to push this up my my non thread finding buddy there you go Ryan

Jake

$35?? This sounds a little more reasonable?? Still have to drill, etc.

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LX2778&P=SM

YOU GET WHAT YOU PAY FOR!

Randy is a great guy and his work is just what you expect!

RACE READY

YOU GET WHAT YOU PAY FOR!

Randy is a great guy and his work is just what you expect!

RACE READY

And...No holes to drill!!! Got 2 and love'em! :thumbsup:

Anyone have Randys number or address I did have it but I misplaced it.I"m ordering one of the lipo trays sounds really nice.

Steve

bigboytoysrandy@yahoo.com

or go to www.strykerracing.net