KSKT has its own deticated website now to buy our products. We are still involved with RKR racing, this just allows you to buy from us direct!!! Please take a look around all comments and feedback is welcomed. Most of our stuff is deticated to the SK racing class but you will find front end parts,bearings,lubes,battery strapping tape(black) springs etc that can be used in pan cars. We do plan to add things to the site in the near future so stay tuned.
Thanks to all who support us.

www.kskts.com

Ken K

Site looks good. I see you can also get the KSKT from LeftHander. Thats great! I hope to run mine in PA this weekend.

Thanks Jon, KSKT cars can be bought online or at the store which we encourage first!!! thorugh these hobbyshops,
Lefthander-rc
Turn 4 R/C speedway
Racing City Hobbies
We thank the above hobbyshops and tracks who support KSKT products and if you are a hobby shop looking to carry our kits and products email me direct
kenkerttula@yahoo.com and we will be in touch.
use coupon code 1205 to received a 10% off discount on everything until next monday 10-08-07!!

Your website looks quite nice Ken.
Rick<><

Thanks rick just want to keep it simple is all. no need to go crazy and offer the world, well atleast for now. lol

Can you help me i did a search on your site but this is all that came up ????

<LI class="message error">Sorry, we could not find any matches for MILKY WAYS. Please check your spelling or search for a different keyword.

About time,whats up kid :wave:

now thats funny, I ate them all, cant ya tell. nice win this weekend mark in your pan car, now just back it up for next weekend.

now thats funny, I ate them all, cant ya tell. nice win this weekend mark in your pan car, now just back it up for next weekend.


Depends if allevo is running :drunk: :drunk: :drunk: :woohoo:

So what Ken is saying that if you order a bunch of things from him, the milky ways will show on the invoice as "backordered"!

lol your just full of jokes this morning, but seriously I think I will watch if Mr.A shows.

So what Ken is saying that if you order a bunch of things from him, the milky ways will show on the invoice as "backordered"!
lol, no smudges will apear on the invoice, lol you dont get any you ate them all at turn 4!!

RKR and KSKT racing products will be sponsoring this weekends race at
RC SPEEDWAY in Benton Maine
RC Speedway will also start carrying the KSKT V2 chassis kits starting this weekend.
should be alot of fun!!!!

Nice website Ken. It's crazy ill..

thanks matt lol, you going to be at marshalls this weekend or you all done? hope all is good with you.

sk all the way at marshalls this weekend! cant wait. actually ken maybe Matt needs a ride for this weekend at marshalls? lol want me to share the love with this sk? :) thats ofcourse if matt is available? :)

i practiced with the car on sat with a stock motor in it. i asked ozzy for his worst stock motor to play with cause i dont have any. i used my worst pack. and i didnt change the setup much from kn when i ran it. anyways up front it was keeping up with the 13.5 pan car guys lol. ofcourse a min in it was slower but what can you expect. its gonna be wild once i have a little more time on friday to actually work on the thing! these cars rock!!!! thanks ken!

Absolutely..I have made way for this weekend just for this race. Still looking for a 13.5 pan ride though.. Joe, you and I can shred the gnar with that rent mobile.

whatever you guys want to do is fine with me, that is a deticated rent a ride as of right now, it seems as though that car is pretty good everywhere, with a little tweeking,

I wanted to officaly welcome MR ERIC DIMMICK to the KSKT team, he is a rookie when it comes to the SK class so when he makes it out to the North East WATCH OUT!!! lol no seriously big thanks to ERIC(darkside motorsports) for making the KSKT happen. Thanks for everything we all appreciate it.

YO!! nice site

Yo-Yo Homie,

Yeah, real nice site... LOL

Looks good Ken, now all we need are some pics of some Awesome KSKT cars. LOL.
LMK if I can help in anyway Dude.
Kevin

you are the offical kskt painter, lol!!!

Good Point Ken....

Green Light Graphics would make a nice catagory on your site........

Hey Kev... :wave:

Def bill, Kevin does great paint work, I am looking forward to the next project I will have him do but its a secret, lol right kevin.

matt I have a 13.5 pan car you can run, we will need to share the radio though unless you have a spektrum radio. up to you offer is on the table, o yeah its a DARKSIDE!!!!!!!!

Good Point Ken....

Green Light Graphics would make a nice catagory on your site........

Hey Kev... :wave:
Whats up Brotha???? Havent talked to you in a while, hope things are going well.? Thanks guys for the comments. Always covered up, but not too much to do you and Ken a car or 2.
Kevin

Ken, PM'ed you..

got it no prob, see ya sat

Ken Jon and the rest of the KSKT RKR team
good luck this weekend sorry we could not make it.

scott& tom

thanks bud, we will see you at the next race, dave and I are leaving at 4am, should be lots of fun, but I think I will be tired as a mofo come monday, lol any orders placed this weekend I will ship first thing tuesday morning


GONE RACING!!!!

Ken, are you ready for some fun online yet?

http://www.nicks-simworld.com/images/NSW_simodified.jpg

you can paint your own car also!!!

That's cool Nick!!

Thanks Chuck!!
they are working on stafford track now, they have most track done already,including
tompson.

Ken K----Is your KRK Solid Chassis still available?

KSKT Racing Products had a GREAT weekend. The response I got this past weekend with our products was amazing. We traveled to Marshalls in PA on sat and Upstate Benton ME R/C Speedway on sunday and to see so many guys running the KSKT cars and doing so well was the most fun I have had in a long time. I just want to thank all that support KSKT racing products, from team drivers,racers and hobbyshops. We picked up these 2 hobbyshops that want to carry our products based on word of mouth from the racers. I owe a special thanks to all of you. Its been a LONG weekend, I forgot some of the racers names and appoligize please correct me if I am wrong, but below is the results of both tracks.

Marshalls PA
13.5 sk A main
Ken K TQ,TR,1st--KSKT V2
Ray 2nd KSKT V2
Dave C 3rd KSKT V2
Gerd 4th KSKT V2

Sk Stock A main
Ken K 1st KSKT
John Bath 2nd KSKT V2
Howard Estrom Tq RKR SOLID!!


New R/c Speedway Benton ME 90% were KSKT cars
SK A MAIN
Ken K 3rd KSKT V2
Tres Page 4th KSKT V2

Sk B main
Gary Dixon 1st KSKT, Thanks for the nice comments you said about the car!! The B main was FULL of the KSKT cars
Mike Magliona 3rd KSKT car, this guy did and OUTSTADING job for his first time at a trophy event and being in carpet racing for less than a year and brought home some hardware, this guy is going to be a top runner in NO time.
Tim Roberts 5th KSKT-keep at it bud your doing fine
there was a 4th KSKT car in the B main and I appoligize for not getting your names, we were in a hurry to go home because of the LONG ride,lol.
Again special thanks to everyone, benton ME was ALOT of fun everyone there was very helpful, Tres and Rick thanks for lunch.the motor and helping people out, that does not go unapreciated. the great attitude and quick to help others out that you dont even know in the pits is what our KSKT team is all about. Thank you

Ken, I had a great time running the KSKT at Marshall's, it's always fun to run with a outstanding product. to bad i could not make it to benton for some more fun.
Dave

Awsome weekend guys looks like you had alot of fun, wish i was there

Im savin it all for the toy box. Then the fun begins

Glad to see all the kskt guys up front.

Tom

Just as a reminder today is the last day to save on our products, put code 1205 when it asks for it and automaticaly takes 10% off your shopping cart.

Nick when I get time I am down for that, thats pretty damn cool stuff.

Mike Gordon, are you asking about the KSK solid carbon chassis? If so I havent had much requests since most people have been wanting tplate cars but if tracks are intrested in carrying them I can certainly have the machine shop run some off. If you are talking about the RKR Solid G10 chassis that needs to be directed to Jon Anderson of RKR as I dont deal with those chassis. Hope to see you guys soon, a bunch of us might even make it up there this weekend, I am hoping for sunday. 2 new team milky guys, makes 5 total for our corner.

Dave we def had a good time, wait til next race, lol

Ken thanks for the great Friday and Sunday racing. The KSKT is awesome and the help you gave me was greatly needed and appreciated. I did not get any sleep on Friday night. To go from a C some-times B main driver to getting the outside pole in the A main at our home track WAS AWESOME and that is in great thanks to you and my new KSKT. Can't wait to go racing anyware with you and the guys again.
Tim

Thanks to KSKT for an incredible day of racing! First time 4 me in command of a KSKT car. Man, did it make me feel confident!! That is 1 smooth ,planted chassis!! The tightest track Ive ever seen and I got a damn good handle on it quickly with that T-plate!!
Ken, .....thanks man for it all!! Your help has been superb!! Your a stand-up guy with 1 hell of a product!!
I'm gunning, aint stoppin' going for it all!! :cool: :woohoo:

Thanks again!!
Mike Magliano Jr.

WOW, thanks guys for the kind words, glad everyone is happy with our products, you guys did great and we had ALOT of fun this past weekend, and thats what its all about. more fun to be had for sure, I think team kskt will be rolling up in 2 vehicles now to all these tracks, lol.

Ken the guy that ran 1st in b main in benton name is Gary Dixon! That was the first time running sk and at that track!! He couldn't say enough about kskt he was for sure impressed.But I talked to hime tonight and he has a broken chasis from one of those wrecks in the main. That really sucks! I will say again thanks for kskt team for coming all the way up to Benton to show support for what Casey's doing for us up here and look foward to seeing you guys soon!

Jason Lam

Ahhh man that sux, if he needs a new chassis have him contact me at kenkerttula@yahoo.com and I will take care of him, I have a feeling because of the layout of the track cars are going to take some HITS and lead to those types of things, lol. but I am glad he was happy with his first run, thats the first I herd of a chassis breaking. thanks for the info and we were glad to make the trip up there, great bunch of guys there.

Website will be updated with more products offered in the next day or 2, sorry for the changes and delays, we have been busy but wanted to get things up and running. in the mean time if there is something you need thats not on the site as of right now contact us direct through the website, we have lots of people signed up already as reg customers, thanks to all who are on hobbytalk.

Here is a sneak peek of what I have been working on and testing will be done soon, if all goes good it will be availible soon to the public, feel free to comment and let me know your thoughts,
http://photos.hobbytalk.com/data/500/medium/body_1.jpg
http://photos.hobbytalk.com/data/500/medium/body_2.jpg

body looks good ken. now lets see it molded and painted up lol

R.N.

Looks like this new deal is workin out great for you,Ken.Good luck in the future with it.I'm ending 2 series within the next month & then i'll go into test mode with my KSKT & try & build some intrest out here. :thumbsup:

Looks pretty sleak. I think it will work out well. Looks more like the real ones, than what we have been running. Put me down for 20 when they are ready.

So far the response has been great, Although some are not exactly happy but I tried to offer something a little more realistic but more importantly the needed downforce, the current body lacked what we need both front and rear end. We always find ourselves slapping on a 1.5 inch spoiler because the rearend gets A$$Y, like I said testing will be done shortly, I wanted to see what kind of response I would get from the public and the guys who are running the sk cars now. This is my version my hand crafting of a mold noone elses. If all works out good, the body will be sent to skor for the aproval process and will be sold with my kits and to hobbyshops if they want to carry them. We all know, anything that can be done in house saves you money=turns a higher profit=more products in the future to save you the racers MONEY, these will be sold at a reasonable price around 20bucks a body. thanks for the comments and keepem coming, I value all input and there will be no hurt feelings, cant make everyone happy, but I try.

Mike Gordon, are you asking about the KSK solid carbon chassis?

Yes sir that is correct. I see it on SKOR as a offered Sportsman(SPEC) chassis. was curious if it's still inproduction. Turn 4 may be interested in a few.

yes those can be order if need be, just let me know 2 weeks ahead of time to give the machine shop enough time.