aracefan3
08-21-2007, 08:52 PM
Does any one make the fender cluster decals?
I am looking for a few sets before I paint up a new body.
I am looking for a few sets before I paint up a new body.
|
View Full Version : 1/4 scale decals aracefan3 08-21-2007, 08:52 PM Does any one make the fender cluster decals? I am looking for a few sets before I paint up a new body. jgoodwin 08-21-2007, 08:57 PM Check out http://home.bellsouth.net/p/PWP-scaleracing aracefan3 08-21-2007, 09:00 PM your the man jgoodwin. they are right there ready for purchase. thanks for the info volboy5887 08-21-2007, 09:21 PM Autographics used to make them as well bryansgarage 08-21-2007, 09:38 PM I tried to get some at Hobby Town when were in Indy. They told me that NASCAR stopped Autographics from putting them out anymore. Something to do with licensing agreements. NASCAR is all about $$$ now! Like the fines the guy down south got for making sponsor decals for 1/4 scale. Tim Mc 08-21-2007, 10:16 PM QSAC should have a cluster set with the MFG's logos and QSAC sponsors logos made up!! I would much rather run a cluster of relevant logos on my 1/4 scale than a set of Nascars. aracefan3 08-21-2007, 10:23 PM I just do not see any decals on their site except the Qsac decals. Do they offer the fender decals on their site or another? 4-Cell Racer 08-21-2007, 11:00 PM Hey John, go to same site as above, click on quarter scale stuff 3 in the list, is that what you are looking for. jgoodwin 08-22-2007, 01:17 AM If you guys tell me what you want on a 1/4 scale sheet for the stuff we use I will make one. Give me a list of the ones you want and I will start working on it ASAP. Joe JG Products. KnoxMotorsports 08-22-2007, 02:27 AM Hi Joe my list WCM ,, BRP,, SUNOCO, AMSOIL;QSAC; K&N;ZENOAH;RACING ROD ENDS;NCS; AIRTRONICS;FUTABA;SPEKTRUM;UNI FILTERS; I know alot of these already have there own decals but not in a fender cluster ,,As i have said before i bought these fender clusters at a yard sale and don t know who made them ,,Bob PeterR 08-22-2007, 02:40 AM anything at all.we cant get anything down here in Australia dangerousdave 08-22-2007, 07:43 AM Hi Joe my list WCM ,, BRP,, SUNOCO, AMSOIL;QSAC; K&N;ZENOAH;RACING ROD ENDS;NCS; AIRTRONICS;FUTABA;SPEKTRUM;UNI FILTERS; I know alot of these already have there own decals but not in a fender cluster ,,As i have said before i bought these fender clusters at a yard sale and don t know who made them ,,Bob NGK plugs are also what most guys run where I race!!!... Dave Dygon Tim Mc 08-22-2007, 08:43 AM Hey Joe, Good to hear from you!! Anything you can put together 1/4 scale related would be nice. Guys, Joe does nice work. I use his head/tailight decals and tire decals. He also has award plaques called "ToolBox Plaques" these are very nice. If tracks choose to give out some type award on a weekly basis, these are the way to go. These are also nice enogh to give out on special events. The right price and racer's like them. Give Joe a shot! Tim IN2RACIN 08-22-2007, 08:49 AM Do the tire decals stay on? or are they just for show? Tim Mc 08-22-2007, 09:21 AM If applied right, they will stay on until you rub them off against the wall like it do...LOL Slider 08-22-2007, 01:15 PM jgoodwin. Do your fender cluster set go on inside or outside of body? IN2RACIN 08-22-2007, 06:10 PM If applied right, they will stay on until you rub them off against the wall like it do...LOL It would be cool if you could paint the logo on. Tim Mc 08-22-2007, 07:55 PM Hmm, Give me a couple weekends!! It would be cool if you could paint the logo on. jgoodwin 08-22-2007, 09:12 PM Looking forward to coming back down this year. Lagoon Park is a 1st class track. jeffdavis38 08-22-2007, 09:46 PM Joe Bring me 4 Goodyear packs 4 Hoosier 4 finder clusters and 4 gear charts. I will see you sat. jgoodwin 08-22-2007, 09:50 PM Will do. How many cars you gonna have? With no rain and the traction that was put down last week there should be a Butt Load of traction for you guys. Hope you gots lots of adjustments built in.lol PeterR 08-23-2007, 05:20 PM jgoodwin. Do your fender cluster set go on inside or outside of body? Hi Joe.. If they go on the outside and you will send to Australia i will order a few sets for new Late model we just built Pete jeffdavis38 08-23-2007, 11:55 PM Will do. How many cars you gonna have? With no rain and the traction that was put down last week there should be a Butt Load of traction for you guys. Hope you gots lots of adjustments built in.lol I hope to run two classes. Sportsman and GN but we will have to see how many show up. I'm going up friday and make some pratice laps. Need a head start on the setup. We have not raced there in over a month. The track will be alot differant because of the nat's race. I like a lot of bite. Glad to see you are filling better. FMurry8995 08-25-2007, 01:59 PM I want to say first off that I do not make decals. I do have some sponsor decals that I picked up from a fellow that sold his sign making business. I have four packs with sixteen decals,(two of each decal). This is pack "A" $8.00. I have one pack with fourteen decals pack "B" $7.00. One pack with twentyone decals pack "C" $9.50. One more set with twentyone decals pack "D" $9.50 and finally one pack with ten decals pack "E" $5.00. Email FMURRY8995@aol.com and I will break down what each pack has in it. When what I have is gone they are gone as I repeat I DO NOT MAKE THESE. thanks, Fred willyplankhead 08-26-2007, 09:09 AM I want to say first off that I do not make decals. I do have some sponsor decals that I picked up from a fellow that sold his sign making business. I have four packs with sixteen decals,(two of each decal). This is pack "A" $8.00. I have one pack with fourteen decals pack "B" $7.00. One pack with twentyone decals pack "C" $9.50. One more set with twentyone decals pack "D" $9.50 and finally one pack with ten decals pack "E" $5.00. Email FMURRY8995@aol.com and I will break down what each pack has in it. When what I have is gone they are gone as I repeat I DO NOT MAKE THESE. thanks, Fred you have PM :thumbsup: FMurry8995 08-26-2007, 11:10 AM Willy I did not find any personal messages in my inbox. Please send via regular email . Thanks, Fred willyplankhead 08-26-2007, 01:10 PM Willy I did not find any personal messages in my inbox. Please send via regular email . Thanks, Fred MY E-MAIL IS DOWN AT THE MOMENT SENT YOU PM AGAIN WENT THREW THIS TIME jeffdavis38 08-26-2007, 02:07 PM Will do. How many cars you gonna have? With no rain and the traction that was put down last week there should be a Butt Load of traction for you guys. Hope you gots lots of adjustments built in.lol I missed you at the track Joe. I will be around this week. I have two bodys to get done for texas race. FMurry8995 08-28-2007, 09:53 PM MY E-MAIL IS DOWN AT THE MOMENT SENT YOU PM AGAIN WENT THREW THIS TIME Mailed the decals today. I added a couple extra to the lot. Please let me know when you get them and if they are acceptable. thanks, Fred :wave: LetsRace 09-19-2007, 11:02 AM Check out http://home.bellsouth.net/p/PWP-scaleracing joe, you have email. IN2RACIN 09-19-2007, 11:16 AM Hmm, Give me a couple weekends!! Anything yet Tim? Tim Mc 09-19-2007, 11:25 AM Didn't work the way I thought it would. I'm trying a different approach.Anything yet Tim? IN2RACIN 03-04-2008, 03:17 PM If you guys tell me what you want on a 1/4 scale sheet for the stuff we use I will make one. Give me a list of the ones you want and I will start working on it ASAP. Joe JG Products. Is JG Products still in biz? I can not get any reply, and my emails keep coming back...?? IN2RACIN 03-05-2008, 04:19 PM Does anyone have a contact for Joe Goodwin? mobetter 03-07-2008, 08:40 PM Guys, Has anyone done computer enlargement of 1/25 scale decals for 1/4 scale cars? Some of the better quality 1/25 decals have surprising resolution when enlarged. jgoodwin 03-13-2008, 12:25 AM Hey guys, Sorry for being hard to get. Have had some health issues over the winter and was not feeling too good. Better noe. I will be at the track on Sat with my stuff and also my vinyl cutter to do decals at the track. I have bunch of new stuff. New dodge headlights, new fender Cluster and also a reverse version to go on the inside as requested. Also have a really cool Gear Chart with a setup sheet on the back that you can use a dry erase marker on (which comes with the chart) I am back in the Screen Printing and Embroidery Business so I am also working on a few Quarter Pounder shirt designs. May try to get over on Friday if not to busy but will be there early Sat am. Joe JG Products 864-386-1924 ddouglas 05-07-2008, 10:41 PM hello Mr. Goodwin I just got into 1/4 scale and joined IQSR I am trying to get a body ready and I am trying to get decals. I wander if you can help me out, I was on a web sight and could not find any way to order. jeffdavis38 05-08-2008, 12:17 AM I have decals in stock ready to ship. Check out the website. www.jandmhobbies.com plcust 05-08-2008, 08:44 AM Is anyone making the Ford Fusion stickers??? IN2RACIN 05-08-2008, 08:59 AM Is anyone making the Ford Fusion stickers??? Yes, Joe Goodwin sells them. plcust 05-08-2008, 10:20 AM Thanks Scott. ddouglas 05-08-2008, 10:55 AM Mr. Davis I think I met you at the Indy track a friend got a body I think from you, was that you we gave the check to? I looked and I got some photos, was that your red trailer we were watching the race on TV at? It is all you guy's fault on that day I went to the gram cracker trail and paid up for QSAC and then paid Todd for IQSR membership and then ordered a car from Scott [cat5] jeffdavis38 05-08-2008, 09:48 PM GOOD DEAL!!! Thats why I play that video. It gets people interested in it.:thumbsup: Let me know if you guys need anything else. Hope to see you at freddies in June.:woohoo: Mr. Davis I think I met you at the Indy track a friend got a body I think from you, was that you we gave the check to? I looked and I got some photos, was that your red trailer we were watching the race on TV at? It is all you guy's fault on that day I went to the gram cracker trail and paid up for QSAC and then paid Todd for IQSR membership and then ordered a car from Scott [cat5] vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.
|