Jake S
05-06-2007, 01:36 PM
Up first for sale we have my Irs converted associated tc3 that I ran this past carpet season. This car includes all the factory team bells and whistles, and more! First we start off with the IRS TC3 Graphite Chassis Conversion Kit ($179.95 Value), and the IRS TC3 Graphite Chassis Stiffening Kit ($47.99 Value). Also this car includes AE Factory Team Shocks (With Yokomo shock caps), Turnbuckles, Motor Mount/Heatsink, arms, towers, etc. The car has RPM blue rod ends through about half of the car, mostly where it is needed. This tc3 also has all the lightweight go-fast stock parts, such as molded outdrives, composite cvds and a lightweight main shaft. Also include is a set of tires, 53mm plaid fronts and purple rears.
SOLD
As for parts, 53mm plaid fronts and purple rears, there is included a 60mm set of plaid fronts and purple rears, and an extra set of 58mm purples. There is also three rear arms, three front towers, one rear tower for extras. There are numerous rear hubs included, as well as four front steering blocks, and caster blocks of different degree ratings. For differential covers there is one lower, and one upper half included (not 100% sure but I believe either will work front or rear). For springs there is one set of reds, two sets of blues, one set of coppers, one set of golds, and one set of greens, in addition to the set of purples and the set of whites on the car. The original sway bars are included, but where never used by myself, as purple-white felt the best on the carpet to me. Three spare composite cvds are included with the car, as well as spare differential gears and a 100t spur (same that is on the car). There is also a spare stiffening brace included in case one where to break (very rare). There is also a NIP AE factory team screw kit for the tc3 included, with an additional set of shock mounting nuts NIP also.
SOLD
Up next forsale we have three Trinity UltraBird 19 turn motors, 19 awg, Locked Commutator, Adjustable Timing, Stand-up Brushes, Tagged Armature, Long Marked Shaft, Epoxy Balanced, Meets All ARCOR Specs For 19 Turn Motors, Meets All ROAR 19T Oval Specs. These motors where cleaned and put in the motor case after use. I ran these 'birds on my pulsar charger to get some amp draw figures: Ultra1 7.83, Ultra2 7.75, Ultra3 6.85.
Asking $35 shipped for all three motors throughout the 48 states.
PENDING
Next we have two eric anderson (ea) motorsports purple endbell stock motors, based off of the trinity monster stock, 27 turns, 22 awg wire, 24 degree locked timing, Drill balanced, ROAR/ARCOR legal, Wider power band and more top speed than P2k2, Best motor for standard sized tracks both on & off-road, The lighter armature also has quicker acceleration then previous high RPM armature designs. These motors where cleaned and put in the motor case after use. I ran these monsters on my pulsar charger to get some amp draw figures: Monster2 7.97 Monster4 6.87 .
Asking $25 shipped for these two EA monsters throughout the 48 states.
Next up we have two purple endbell handouts from a stock oval race held near the end of 2006, these motors where cleaned and put in the motor case after use. These are also based of the trinity monster stock arm, 27 turns, 22 awg wire, 24 degree locked timing, Drill balanced, ROAR/ARCOR legal, Wider power band and more top speed than P2k2, Best motor for standard sized tracks both on & off-road, The lighter armature also has quicker acceleration then previous high RPM armature designs. These motors where cleaned and put in the motor case after use. I ran these monsters on my pulsar charger to get some amp draw figures: Monster1 8.91, Monster3 7.33.
Asking $25 shipped for these two monsters throughout the 48 states.
PENDING
Also up forsale we have some stadium offroad tires, mounted on yellow proline rims. These tires have had little to no use. I believe the first set is off of a RTR T4 and remounted on a set of yellow proline rims, which would make a pretty decent tire on a higher traction surface, or even be a good tire to grid down to make slicks out of. The second set is a brand new set of Proline Lugnuts mounted on proline rims, which make a nice tire for long mains on a loose track. The third set is a set of Panther stud set of tires mounted on proline rims, this tire would make a pretty decent tire for tracks where step-pins are used.
Asking $30 shipped for all three sets of tires throughout the 48 states.
SOLD
As for parts, 53mm plaid fronts and purple rears, there is included a 60mm set of plaid fronts and purple rears, and an extra set of 58mm purples. There is also three rear arms, three front towers, one rear tower for extras. There are numerous rear hubs included, as well as four front steering blocks, and caster blocks of different degree ratings. For differential covers there is one lower, and one upper half included (not 100% sure but I believe either will work front or rear). For springs there is one set of reds, two sets of blues, one set of coppers, one set of golds, and one set of greens, in addition to the set of purples and the set of whites on the car. The original sway bars are included, but where never used by myself, as purple-white felt the best on the carpet to me. Three spare composite cvds are included with the car, as well as spare differential gears and a 100t spur (same that is on the car). There is also a spare stiffening brace included in case one where to break (very rare). There is also a NIP AE factory team screw kit for the tc3 included, with an additional set of shock mounting nuts NIP also.
SOLD
Up next forsale we have three Trinity UltraBird 19 turn motors, 19 awg, Locked Commutator, Adjustable Timing, Stand-up Brushes, Tagged Armature, Long Marked Shaft, Epoxy Balanced, Meets All ARCOR Specs For 19 Turn Motors, Meets All ROAR 19T Oval Specs. These motors where cleaned and put in the motor case after use. I ran these 'birds on my pulsar charger to get some amp draw figures: Ultra1 7.83, Ultra2 7.75, Ultra3 6.85.
Asking $35 shipped for all three motors throughout the 48 states.
PENDING
Next we have two eric anderson (ea) motorsports purple endbell stock motors, based off of the trinity monster stock, 27 turns, 22 awg wire, 24 degree locked timing, Drill balanced, ROAR/ARCOR legal, Wider power band and more top speed than P2k2, Best motor for standard sized tracks both on & off-road, The lighter armature also has quicker acceleration then previous high RPM armature designs. These motors where cleaned and put in the motor case after use. I ran these monsters on my pulsar charger to get some amp draw figures: Monster2 7.97 Monster4 6.87 .
Asking $25 shipped for these two EA monsters throughout the 48 states.
Next up we have two purple endbell handouts from a stock oval race held near the end of 2006, these motors where cleaned and put in the motor case after use. These are also based of the trinity monster stock arm, 27 turns, 22 awg wire, 24 degree locked timing, Drill balanced, ROAR/ARCOR legal, Wider power band and more top speed than P2k2, Best motor for standard sized tracks both on & off-road, The lighter armature also has quicker acceleration then previous high RPM armature designs. These motors where cleaned and put in the motor case after use. I ran these monsters on my pulsar charger to get some amp draw figures: Monster1 8.91, Monster3 7.33.
Asking $25 shipped for these two monsters throughout the 48 states.
PENDING
Also up forsale we have some stadium offroad tires, mounted on yellow proline rims. These tires have had little to no use. I believe the first set is off of a RTR T4 and remounted on a set of yellow proline rims, which would make a pretty decent tire on a higher traction surface, or even be a good tire to grid down to make slicks out of. The second set is a brand new set of Proline Lugnuts mounted on proline rims, which make a nice tire for long mains on a loose track. The third set is a set of Panther stud set of tires mounted on proline rims, this tire would make a pretty decent tire for tracks where step-pins are used.
Asking $30 shipped for all three sets of tires throughout the 48 states.