Im trying to get my GTB mounted on the LR of my PRO 3 but the receiver wire is way too short. whats my options besides moving the speedo to the r/s of the chassis. Do they make a longer wire? Do i have to splice it?

Anyone who could send me pics of their pro 3 brushless setup would be greatly appreciated!

thnx

Scott (sdbig1@aol.com)

Hey, Scott

I assume you mean the 4cell vesion with just the short wires that are soldered on. I saw someone have the same problem and they moved there receiver to next to the center shock and turned it up on it's side(between the battery and shock). Don't know if that is the best answer but that is what I saw!

Thanks Brian, I will see what that looks like.

Scott

They make a 4.5 and a 9 inch wire,sounds like you got the 4.5

ahhh, ic. Yep, I got the 4.5. I will check Novak site and try to find the 9".

thnx

Scott

If you have an old servo, just cut the leads off and solder it back onto the GTB.

RC

Jr Also Makes A Servo Extension Wire With Plugs That Works Good Too!

Awsome info guys. Thanks for taking the time to help!

Scott

Any hobby shop that does RC planes should have servo extension cables, planes get to be large, got to hook them servos up some how!!

Novak is going to resolder a longer wire on for me so it does not in anyway void the warranty. The first shipment of GTB 4cells had the short wire installed. After the Snowbirds they made it 9".

Thanks to all for their help.

Scott