I am trying to rebuild my old Trinity EV10SS, it has SERIOUS sentimental value to me. Everything on it is perfect, except for the front end. The last race I was in, some 12yold thought he would play bumpercars since he was apparently bored and I ended up in the wall. The kid was admonished, but the front end was trashed. I got out of racing before I could replace it and now it's impossible to find a bolt on Reactive Camber System (what it was called at the time) for it. Does anyone know of either a set laying around in some store, or better yet, a newer front end kit that is completely compatable, maybe something from IRS. For sentimental reasons, I'd rather race my old car, so every little bit of advice would help.

Thank you in advance.

The ev10ss can use the same front lower arms that are on the switchblade, revolver, and reflex10ss chassis. A friend of mine still occasionally races his on a local flat track. He runs the switchblade front suspension and put VCS shocks in the rear. The car handles pretty good.
Mike

I'll keep an eye out and if I see any parts I'll post here.

Doug P

Jorge M (outsider6) from ORC might have some of those parts. I know he has one whole car laying around like brand new.

Walter

I am trying to rebuild my old Trinity EV10SS, it has SERIOUS sentimental value to me. Everything on it is perfect, except for the front end. The last race I was in, some 12yold thought he would play bumpercars since he was apparently bored and I ended up in the wall. The kid was admonished, but the front end was trashed. I got out of racing before I could replace it and now it's impossible to find a bolt on Reactive Camber System (what it was called at the time) for it. Does anyone know of either a set laying around in some store, or better yet, a newer front end kit that is completely compatable, maybe something from IRS. For sentimental reasons, I'd rather race my old car, so every little bit of advice would help.

Thank you in advance.

I have boxes full of EV10 and EV10SS parts...production and prototype.
Call me at the shop M-F, 9-5 EST and I'll hook you up...:thumbsup:
518-452-0422

Thank you!!! Basically I need an entire front end assembly, the tie rods, end caps and the plate for the SS, the only good parts are the axle/steering blocks.

Here is a company that it still selling a very similar front end - RCIndycars.com (http://www.rcindycars.com (http://www.rcindycars.com/)).

Check out the Spitfire chassis (http://www.rcindycars.com/spitfire.html). It uses a reactive front end. Not sure if it will bolt on the the EV10SS, but it is worth a shot.

LMK if todd cant help you, still have a complete purple car I restored myself.

Ah the olden days...

I have boxes full of EV10 and EV10SS parts...production and prototype.
Call me at the shop M-F, 9-5 EST and I'll hook you up...:thumbsup:
518-452-0422

There's only one EV part I want out of your basement and I believe it has a purple and white body on it! :thumbsup:

Check ebay, there is an EV10SS on there.

Check ebay, there is an EV10SS on there.
Under what title, i searched for an hour?

I found it under oval.I will send you the link if it is still there.

Car on eBay is a Trinity Reflex according to listing. Here is the link (http://cgi.ebay.com/Trinity-Reflex-Oval-Track-Carpet-Car-1-10-Scale-Chassis_W0QQitemZ160099737960QQcategoryZ19168QQssP ageNameZWDVWQQrdZ1QQcmdZViewItem)

also check under pan and pancar

There's only one EV part I want out of your basement and I believe it has a purple and white body on it! :thumbsup:
Ah yes, Joel Johnson's infamous EV10 Nats car. I want to restore it and send it to him...It would look good in his office.

When I say I have boxes of EV10 parts, I mean BOXES. I probably have enough new and used parts to build 10-12 entire cars and still have boxes of parts left over. Get in touch with me and I'll make the stuff disappear...:thumbsup:

How cheap? I need the front end plate, tie rods*, ball caps* & ball end screws (*these include what I need for steering servo too) and I would like to buy extras of the tie rods and ball caps and such. The axles are actually intact, the plate broke and the rods/caps bent. You can email me directly with prices and either I can use paypal (if you have an account) or call you when I am home on a lunch break. (can't call LD from work, lol) You also wouldn't happen to have the old Trinity Oval style decal sheet, would you?

Thanks to everyone who pitched in their 2 cents, I tried to find parts for this car 2 years ago and came up with nothing, now I have several leads to follow as my pocketbook will allow.

Live fast, drive hard!

i asked the same question last year with no good results. hehe guess now maybe i can get my trinity car back in shape :) Todd Pm me with what you have bud!

I have a complete EV-SS purple car available if you guys need hobbybobby1@townisp.com