jettvolks
03-12-2007, 10:36 PM
Helis traded off!!! No longer available.
NEW PRICE $160 shipped!!! PRICE REDUCED AGAIN!!
http://i8.photobucket.com/albums/a1/cherojee/3D%20Pro%20pics/IM001618.jpg
The complete heli I bought as a NIB unit and added the RC-Helitech belt drive tail conversion that was installed on the other heli pictured. This is a $50 upgrade when you get lucky enough to have them build one for you since there is a waiting list on this upgrade.I installed the electronics pictured (which are not included in the sale) and did some short test hovering in my basement just to verify everything was working correctly. Original box and manual is included. Blades currently on the heli came off of my Hummingbird CP Pro (source of the nicks on the ends) and will come with the NIP still sealed in the bag wood symetricals.
http://i8.photobucket.com/albums/a1/cherojee/3D%20Pro%20pics/IM001621.jpg
The parts heli was bought strictly for the belt drive setup and came to me in pieces. I only pieced it together for the pics. Will come unassembled. Looks to be complete other than the tail blade grips,tail hub assembly, main gear, and a rotor head assembly.
http://i8.photobucket.com/albums/a1/cherojee/3D%20Pro%20pics/IM001620.jpg
NIP parts are:
1 pkg. Landing gear struts
1 pkg. Feather shaft and hardware w/dampners
1 pkg. Flybar paddles (I think these are for the cp pro but should work fine)
1 pkg. Tail blades
1 pkg. Conical main gear for the shaft drive setup
1 pkg. No label spare rc helitech belt
NIP Mainshaft, NIP Anti-rotation bracket, and main gear pictured no longer included as they were sold.
Out of package parts are:
2 new landing gear skids
Plus other misc. parts pictured that should be the rest of the parts heli other than what is listed above as missing.
http://i8.photobucket.com/albums/a1/cherojee/3D%20Pro%20pics/IM001619.jpg
Electronics installed are not included as they were taken off another of my birds for testing and they are going back into it as soon as I remove them from this heli.
NOW INCLUDES A Cirrus MPG-03 gyro that I found while digging around for more parts!
Asking $225 or reasonable offer for the entire package shipped USPS Priority w/delivery confirmation (US only) or possibly an interesting trade??? Paypal is preferred and I do not charge the associated fees.
Electronics are not included in my asking price since all of these units (other than the servos and gyro) are new (less than 2 weeks old) Berg 7P programmable reciever, Castle Creations Thunderbird 18 esc, Himax 4100kv motor w/10 tooth pinion, MS Composite Heading Hold gyro, eFlite s60 micro servos on the cyclic, and an eFlite s75 for the tail. For the right price they could be included but I do have a decent amount of money invested in them more than I am asking for the 2 helis in fact.
I do have 4 NIP Dynam 22 ounce torque servos and an eFlite Park 370 3600kv brushless motor that I would include for an additional $75.
Misc. parts pictured but not listed are no longer included as I have sold them off to other parties.
NEW PRICE $160 shipped!!! PRICE REDUCED AGAIN!!
http://i8.photobucket.com/albums/a1/cherojee/3D%20Pro%20pics/IM001618.jpg
The complete heli I bought as a NIB unit and added the RC-Helitech belt drive tail conversion that was installed on the other heli pictured. This is a $50 upgrade when you get lucky enough to have them build one for you since there is a waiting list on this upgrade.I installed the electronics pictured (which are not included in the sale) and did some short test hovering in my basement just to verify everything was working correctly. Original box and manual is included. Blades currently on the heli came off of my Hummingbird CP Pro (source of the nicks on the ends) and will come with the NIP still sealed in the bag wood symetricals.
http://i8.photobucket.com/albums/a1/cherojee/3D%20Pro%20pics/IM001621.jpg
The parts heli was bought strictly for the belt drive setup and came to me in pieces. I only pieced it together for the pics. Will come unassembled. Looks to be complete other than the tail blade grips,tail hub assembly, main gear, and a rotor head assembly.
http://i8.photobucket.com/albums/a1/cherojee/3D%20Pro%20pics/IM001620.jpg
NIP parts are:
1 pkg. Landing gear struts
1 pkg. Feather shaft and hardware w/dampners
1 pkg. Flybar paddles (I think these are for the cp pro but should work fine)
1 pkg. Tail blades
1 pkg. Conical main gear for the shaft drive setup
1 pkg. No label spare rc helitech belt
NIP Mainshaft, NIP Anti-rotation bracket, and main gear pictured no longer included as they were sold.
Out of package parts are:
2 new landing gear skids
Plus other misc. parts pictured that should be the rest of the parts heli other than what is listed above as missing.
http://i8.photobucket.com/albums/a1/cherojee/3D%20Pro%20pics/IM001619.jpg
Electronics installed are not included as they were taken off another of my birds for testing and they are going back into it as soon as I remove them from this heli.
NOW INCLUDES A Cirrus MPG-03 gyro that I found while digging around for more parts!
Asking $225 or reasonable offer for the entire package shipped USPS Priority w/delivery confirmation (US only) or possibly an interesting trade??? Paypal is preferred and I do not charge the associated fees.
Electronics are not included in my asking price since all of these units (other than the servos and gyro) are new (less than 2 weeks old) Berg 7P programmable reciever, Castle Creations Thunderbird 18 esc, Himax 4100kv motor w/10 tooth pinion, MS Composite Heading Hold gyro, eFlite s60 micro servos on the cyclic, and an eFlite s75 for the tail. For the right price they could be included but I do have a decent amount of money invested in them more than I am asking for the 2 helis in fact.
I do have 4 NIP Dynam 22 ounce torque servos and an eFlite Park 370 3600kv brushless motor that I would include for an additional $75.
Misc. parts pictured but not listed are no longer included as I have sold them off to other parties.