Hey guys I just wanted to get a thread going again for Jeff and Troy at FANTOM Racing (http://www.fantomracing.com). They got some killer products! They carry a bunch of stuff inlcuding The FACTS Machine, The Fantom Comm Lathe, and a line of awesome motors!

FANTOM Racing (http://www.fantomracing.com) has a lot of knowledge and years of experience behind them too! They have been around for a long time. However they took a little time off and have come back in full force! With a brand new website complete with an online store and Troy tuned my Ultra Bird motors at the 2007 Snowbird Nationals and helped me win the biggest race of my career! Fantom also helped Pete D’Agnolo finish 4th in Pro Mod and Rocket Miller finish 2nd in 12th scale 19t.


Here is a little bit from the site:

Just a little FYI, Pete was using our newest C.P. based (Alloy 2) hand-wound modified 6x1 oval wind, which is the same motor available to you in our custom shop. When ordering, just make sure to choose the “big wire” option. Also, Adam and “The Rocket” were using our latest brush and spring combinations, found on our newest 19 Turn motors, also available direct from our new web-store! Click here to order your custom motor today!



Check em' out! :thumbsup:

Adam Liehr
Team Fantom Racing (http://www.fantomracing.com) - More power to the people!

Adam, give me a buzz when you get a second, have a couple questions for you about the open.

Glad to see fantom is back. Pretty much everything I used to run when I was buying stuff over the counter was fantom, and I never had any complaints. I am sure you, Pete, and Steve will do fantom proud.

See you this weekend!

Okay will do. I'll try and call sometime this afternoon.

Adam, you have a pm.

Is this the same fantom racing motors from the 90's? Had a block slanted FANTOM for its logo.

I think so, their other logo is an awsome looking skull. go to www.fantomracing.com and check em out.

Hi Adam , The new store on line is doing awesome , ,, With all the new motor lines [oval based] and a complete lin eof batts and latch etc etc ,,, Check it out , soon we will be posting car sheetup sheets for teh KSG cars and have a whole section of motor tricks to make your fantom motors SCREAM like ours in Sunny Fla .....


Best part of the new site is the custom winding area ....Want a 4 single with 13 gauge wire , they can do it .....

ROCKET Watch out TENNS we are coming in a few weeks...

Rocket, you making it to the ARCOR Open?

Just made a purchase today from website. Great communication!! Keep up the good work!

HI jeff Yes I still have my car from2 years ago , I am hoefull the new carpet is not going to be a big adjustment .....I will be in late on thrusday to get a pit spot and then race 19turn and brushless.....SRM Maybe MOD if enough guys are running SRM


Are you in for ROAR nationals in TENNS ......Flat track

Just wanted to drop Troy and Jeff a note sayin thanks for the awesome motors! Keep up the great work!


Adam Liehr
Team Fantom

Rocket,

There should be plenty of mod guys for you to race against.... Glad to hear your coming.... Is Pedro going to be in tow?

Mario

Rocket, not going to be able to make it to the roar nats. With school going on it is just too far of a haul. The new carpet at classic is awsome, you won't be disappointed. If you need a Mod set-up let me or Mario know, I think our cars are pretty close. Later!

Pedro is a no go for this race , ,, Jeff see ya next week ...I am going out htis wekend to get dialed in ...First thing Saturday Morning ......SRM


PS the new website is going great for FANTOM and they have repriced their armatures on the special winds..... Check It out


SRM

Rocket - no more bump at classic either going into 1, walt fixed that when he put the new dancefloor down.

Not racing it but will be by on Sunday to catch up with everybody so I'll see ya then

Good luck !!
Eric H

Hey guys ive got a question about the fantom dyno............. is it possible that if your 12 volt battery isnt working properly that the dyno could draw voltage through the computer to do a motor run?

thanks
Dylan S

I dont think so the wire out of the dyno are out put wires

Wanted to thank Troy again for the killer motors and support at the 2007 ARCOR NATS! It is nice to have great advice and info, just a phone call away! Not all companys have customer service like that! With his help I was able to qualify 4th and finish 3rd in my first Mod nationals experience! Ricky TQed and finished 2nd!!!!!

The modified field was full of top calibur drivers like Honeycutt, Roman P. Arnie, Phil M, and Ray Darroch!

The title came down to the 3rd A-main, with at least 4 guys having a shot to win (Honeycutt, Ricky, Fie, and Myself).

Check out the line of killer ALLOY MODIFIED and TEAM MACHINE WOUND motors!

Ricky, Mario Marsillio, Jeff Patch, and Myself all ran Fantom ALLOY 7x1 and 7x2 CP Motors. You can find them at most hobby shops and direct on their killer new online store.

www.fantomracing.com

Fantom is back, and in full force!

Adam Liehr
Team Fantom

I wanted to thank Jeff and Troy for hooking me up with some awsome HP. If it wasn't for some bad luck in the heats I probably could have made the show. If was definately a top notch field, and some of the tightest racing I had seen in a long time. Ricky and Adam did an awsome job this weekend, not only on the race track, but off it as well proving why they are considered a couple of the nicest guys in the industry.

Jeff Patch
Another Satisfied Customer

The machine wound 19 turn is that an Ultrabird type motor?

Just wanted to thank Troy for the killer HP this past weekend. I TQed 4 cell mod and finished second to Greg Honeycutt and Adam Liehr also finished 3rd on Fantom motors. Keep up the good work at the shop and thanks for getting us our stuff on such short notice. If your looking for HP for the Roar nats you may want to give them a call. Keep up the great work!!!!

Rick Liehr

JH Racing

Troy doesn't sell tuned Ultrabirds. The spec 19t on the site is a komodo dragon motor. If you send him a ub he can tune it for $17, the same way he did mine at the Snowbirds!

Adam Liehr
Team Fantom

Great Job by all at the AROCR nats this week we are off to TENNS for ROAR nats ...Troy will be there helping all who need it ...Stop by and say YEAK BOB to get a 10percent rebate .......LOL


ROCKET

Godd luck to all Team Fantom at The Carpet Nats.

Good luck Rocket and Pete.... Wish we could be there!

Remember, if you rub Rocket's head and get a "yea bob" you will be super fast!!! haha


Adam Liehr
Team Fantom

I would like to thank Troy and his brother for awsome HP today I quaulified 2nd and finished 2nd TODAY.

Good luck to Pete sitting second in mod and Rocket TQ in 12th scale in the mains today!!!

Awsome job by Pete and Rocket Miller at the Nats.

just got my motors for the region 3 race, and they look great! Hope we get the car under me QUICK, its been 13 years since I ran caps and Im ready to start going fast again! Mabee caps will get popular again,too. Just got those in the mail and they sure look alot better than they did 12 years ago .There ROUND !!! thanks for everything troy. troy meridith

Good luck Troy! Let us know how they work.


Adam Liehr
Team Fantom

Adam Give me a call later tonight , Pedro and i are racing dirt oval tonight but need to get out to the new track for the ARCOR worlds .... The testing of the new motor is going very well and we need a large track to test different winds for the new setup ....


NEW SETUP IS VERY VERY FAASTTTTTTTTTTTTTTTT


SRM

Steve email me your phone #...........Adam is at camp and I won't see him to saturday. I have a few questions for you.

Thanks,
Rick

PM in your box ricky ..talk to you soon SRM

Rocket.......the track record fell again this past Sunday. 43 4:04 !!!!! Love the rip.

Later,
Rick Liehr

Are you guys using the Checkpiont tear down and what brush spring combo are they being prepaired with?

What brush do I need for the Alloy 2 Mod something like a Infinity brush ? Any Help would be Appreciated trying to get my stuff ready for the masters.

Sorry for the delay...

I would go with the silver brushes (infinity I believe) and a gold and silver spring combo.

Thanks for the info.

Any? contact numbers? I have windows version software for my Fantom that I cant get to work, wrong key number or something And I would really like to get it to work....

269-483-0200 or fantomracing.com

Well just found out through e-mail that Fantom is no longer doing Checkpoint Mod motors they seem to be working on a brushless motor.