Laporta them wee the days.Hows thins goin' your little racin buggies yet

things are good i am living in kentucky now,and working my life away
how are things with you:dude:

can i drive it too ??

yes i bet cory can put some training wheels on it for you what do you think cory

Cool, we will see ya there.

The weather is good for my ArticCat ZRT 800 tripple gatta have some ponys to haul me around +it has 248 SUD BOY Spikes
Nothin like going across alake at 125

Just to let everyone know. I talked with the owner of blitz hobbysports up here in coldwater and they are not going to have a track up here. They will have a landing strip for flying planes and that is it. They are suppose to open sometime in april now. they keep pushing their opening date back.

does anyone know of hotels around hcrc or where is everyone staying on the 30th because it is a 4 hour drive for me:confused:

does anyone know anyone with a losi 2.0 buggy for sale:drunk:

Chris,
Search hotels in Avon In. Its 5 minutes fron track and its a good area with alot of shopping for your wife.

Chris,
Search hotels in Avon In. Its 5 minutes fron track and its a good area with alot of shopping for your wife.

thanks bud / my wife says thanks too.:thumbsup:

Chris,
Search hotels in Avon In. Its 5 minutes fron track and its a good area with alot of shopping for your wife.

There is quite a bit of hotels to choose from in Coldwater Mi
it is only about 14 miles from the track. It's a bit of a drive but not to bad.

thanks but they are going to indy to race

There is quite a bit of hotels to choose from in Coldwater Mi
it is only about 14 miles from the track. It's a bit of a drive but not to bad.

dude where talking about danville ,in:confused:

Whoops. That's is a bit of a drive I thought they were talking about the Fremont track

Whoops. That's is a bit of a drive I thought they were talking about the Fremont track

thats ok bud thanks for your help though:thumbsup:

:wave:will be back racing in feb my go up to al place or down to danville:dude::woohoo::woohoo:

what size are the hub bearings for a 2.0 truggy i looked on the losi site and the picture showed a 8x14x4 so i ordered them they came today and they are to small? they fit the original 8t but not the 2.0. i didnt get a manual with the truck any help would be great. thanks

what size are the hub bearings for a 2.0 truggy i looked on the losi site and the picture showed a 8x14x4 so i ordered them they came today and they are to small? they fit the original 8t but not the 2.0. i didnt get a manual with the truck any help would be great. thanks

hey bud the inside is1/2x3/4 part #a6953 and the outside is8x14x4mm part #a6945 hope this helps :thumbsup:

hey bud the inside is1/2x3/4 part #a6953 and the outside is8x14x4mm part #a6945 hope this helps :thumbsup:

hey kev to some guys are doing a mod on the hubs to make them bigger so they can run bigger bearings,does it look like they have been drilled out:confused:

they are bigger for sure ill have to look at them again

hmmmm.....
how muddy is the track?
I have the itch to burn some nitro, lol

Lol Real Muddy

kinda what I figured :lol:

what size are the hub bearings for a 2.0 truggy i looked on the losi site and the picture showed a 8x14x4 so i ordered them they came today and they are to small? they fit the original 8t but not the 2.0. i didnt get a manual with the truck any help would be great. thanks

Kevin,

your truggy has the modified hubs by J-dub down in Indy. The orig. 8T 2.0's were eating bearings so he was machining them out to fit a bigger bearing. I don't recall the exact size. Check the Losi 8T 2.0 thread on rc-tech..it'll be listed in there. I'm also pretty sure it's the same size as the KH alum rear hub.

hammer

GOTCHA thanks i found another set of regular ones for now since i had new bearings for those ones lol ill ck it out

Squirrel!!

you pop that kid yet splat?

whats up everbody

DANG whats up big andy been a while!

Squirrel!!

"my master is smart, very smart, he made this collar for me so I can talk---SQUIRREL!!!!" My 4yr olds fav. movie, so ive seen it about 50 timesLOL!!

im totally lost...

Kevin... you guys buried up there or what?

"my master is smart, very smart, he made this collar for me so I can talk---SQUIRREL!!!!" My 4yr olds fav. movie, so ive seen it about 50 timesLOL!!


"Up" great movie! :lol:

Kevin... you guys buried up there or what?

yep... but the snowmobiles are runnin:thumbsup:

YAAAAAAAAAA Buddy 160 mi in two days.

you pop that kid yet splat?
Nope. Not "due" tilll the end of April

Kevin you got email!

It has been some time since I turned the truggy on, I put new batteries in and just to see if the servos where working ok, Seems my Truggy has steering attitude, I have learned not to leave the steering in turned position when I turn it off or it takes some time for the steering to come on. I have a feeling that my servo has a short some how but I am not sure.

I am going on vacation march 1'st I will thank of you all when I am sitting by the pool in 80 degree weather! :)

looking forword to some good racing this year

should I just forget gas and go with a slash?

its a whole lot easier... and cheeper for some one new

Do they have in door places I can run my slash at?

I am getting wiser with my rc stuff, it just took me some time for a refresher from planes.

Hey kevin i think that i am going up there on fri night

bring some lights!

Do they have in door places I can run my slash at?

we have raced 3 of the last 4 weeks inside up near flint, AMS raceway

Hey Kevin what's the difference between a brushless motor and non brush?

I guess I am going to take my vacation in another month when it gets a little warmer down south.

hehe I read up on it in google! I am good.

we run them STOCK dont buy anything different for it.